Third Generation F-Body Message Boards
0 2020/07/21 12:40:39
0 2020/07/14 18:49:05
Same rod, different angle.
Same rod, different angle.
0 2020/07/04 11:59:49
Shifter rod on transmission bracket.
Shifter rod on transmission bracket.
0 2020/07/04 11:58:23
0 2020/07/03 16:23:23
0 2020/07/03 16:22:53
I havent wiped down all of the rear end. If no good conclusions can be made from these pictures, i will go and wipe it all down so you can see better.
I havent wiped down all of the rear end. If no good conclusions can be made from these pictures, i will go and wipe it all down so you can see better.
0 2020/07/01 18:56:20
0 2020/06/28 10:18:58
0 2020/06/17 21:15:31
0 2020/06/17 21:14:56
0 2020/06/17 21:14:09
0 2020/06/17 21:13:58
0 2020/06/17 21:13:47
0 2020/06/17 21:13:35
0 2020/06/17 21:13:23
0 2020/06/07 23:39:15
0 2020/05/23 00:38:48
0 2020/05/23 00:38:31
0 2020/05/23 00:38:11
0 2020/02/24 22:20:24
0 2020/02/23 19:26:21
0 2020/02/23 19:18:54
0 2020/02/23 19:18:02
0 2018/08/11 02:12:12
0 2018/08/11 02:11:53
0 2018/08/11 02:11:43
0 2018/08/11 02:11:33
Small black stain on the butt part on the right.
Small black stain on the butt part on the right.
0 2018/08/11 02:11:22
It seems sealed, which would explain why no fluid seems to be getting into this freshly rebuilt box.
It seems sealed, which would explain why no fluid seems to be getting into this freshly rebuilt box.
0 2018/07/21 01:04:48
0 2018/07/20 14:09:52
0 2018/07/20 14:09:39
0 2018/07/20 14:09:17
0 2018/07/20 14:08:45
And here is the adapter i am trying to remove sonj can plugnin my stock lines. Last time i had a new reman pump the fitting literally just fell out...
And here is the adapter i am trying to remove sonj can plugnin my stock lines. Last time i had a new reman pump the fitting literally just fell out...
0 2018/06/24 14:19:31
This is the enfire high pressure regulator removed from back of Saginaw style pump, if you dont know what im talking about here.
This is the enfire high pressure regulator removed from back of Saginaw style pump, if you dont know what im talking about here.
0 2018/06/24 14:19:08
Brass fitting stuck.
Brass fitting stuck.
0 2018/06/24 14:19:05
0 2017/08/15 17:52:16
Aftermarket drain cock shoved into OEM drain cock (after removing the failed center) and packed JB Weld epoxy around and in it. Let it sit overnight in order to fully cure, don't trust that "15 minute cure" epoxy.
Aftermarket drain cock shoved into OEM drain cock (after removing the failed center) and packed JB Weld epoxy around and in it. Let it sit overnight in order to fully cure, don't trust that "15 minute cure" epoxy.
0 2017/08/15 16:13:42
OEM drain cock removed.
OEM drain cock removed.
0 2017/08/15 16:13:40
OEM drain cock.
OEM drain cock.
0 2017/08/15 16:13:06