My Post Pictures

October 9, 2017

179

0

0 2024/12/17 10:56:25 83RDRACR

My favorite view of the car.

My favorite view of the car.

0 2024/12/17 11:00:46 83RDRACR

0 2025/10/27 08:10:02 83RDRACR

0 2025/10/27 08:10:29 83RDRACR

0 2025/10/27 08:12:45 83RDRACR

0 2025/10/27 08:14:01 83RDRACR

0 2025/10/27 08:15:14 83RDRACR

0 2025/11/27 07:07:24 83RDRACR

0 2026/03/03 09:43:04 83RDRACR

0 2026/03/03 19:29:40 83RDRACR

0 2026/03/03 19:31:02 83RDRACR

My homemade manual brake conversion...1/2" aluminum mounting plate, adjustable pushrod, pushrod pin moved up 2", Dorman mopar master cylinder. About $50 total.

My homemade manual brake conversion...1/2" aluminum mounting plate, adjustable pushrod, pushrod pin moved up 2", Dorman mopar master cylinder. About $50 total.

0 2026/03/03 19:55:10 83RDRACR

Slide-out electrical drawer

Slide-out electrical drawer

0 2026/03/03 20:27:51 83RDRACR

Fuse box mounted

Fuse box mounted

0 2026/03/03 20:28:27 83RDRACR

Drawer closed. Not shown are the 3 10-32 thumb screws that secure the drawer when closed.

Drawer closed. Not shown are the 3 10-32 thumb screws that secure the drawer when closed.

0 2026/03/03 20:29:53 83RDRACR

After the new wiring was routed it was all covered in a nylon wrap. This was much easier to use than the factory corrugated plastic loom.

After the new wiring was routed it was all covered in a nylon wrap. This was much easier to use than the factory corrugated plastic loom.

0 2026/03/03 20:35:16 83RDRACR

Behind the dash is much less cluttered.

Behind the dash is much less cluttered.

0 2026/03/03 20:35:40 83RDRACR

3qt accumulator with electric solenoid valve.

3qt accumulator with electric solenoid valve.

0 2026/03/03 21:21:46 83RDRACR

Check valve before tee fitting.

Check valve before tee fitting.

0 2026/03/03 21:22:20 83RDRACR

Page
5 of 5

Go To
Page

Go to page of 5 pages

1
2
3
4
5