Third Generation F-Body Message Boards
0 2019/03/26 16:07:24
Absolutely the hardest part about building the chassis is getting this part straight and square
Absolutely the hardest part about building the chassis is getting this part straight and square
0 2019/04/13 15:37:53
0 2019/04/13 15:41:13
Absolutely the hardest part of the chassis to get straight and square
Absolutely the hardest part of the chassis to get straight and square
0 2019/04/13 15:42:42
Off the table and upside down. Time to weld the bottom
Off the table and upside down. Time to weld the bottom
0 2019/08/07 15:38:36
0 2019/08/07 15:42:53
Making progress, had to change tubing around rear transmission mount to satisfy spec changes and make some more foot room.
Making progress, had to change tubing around rear transmission mount to satisfy spec changes and make some more foot room.
0 2019/11/07 11:30:56
Lower control arms and mounts done.
Lower control arms and mounts done.
0 2019/11/07 11:31:03
Moving on to the rear.
Moving on to the rear.
0 2019/11/07 11:31:14
Bought some new 4 link brackets, they were laser cut, but the holes were sloppy, so I made my own!!!
Bought some new 4 link brackets, they were laser cut, but the holes were sloppy, so I made my own!!!
0 2020/02/15 08:54:28
Making progress, everything fits good
Making progress, everything fits good
0 2020/02/15 08:54:36
Brackets came out really good and tied in rear tubing nicely
Brackets came out really good and tied in rear tubing nicely
0 2020/02/15 08:54:45
This car is going to be a little heavy
This car is going to be a little heavy
0 2020/02/15 08:54:56
Made some brackets from 1/4 inch plate
Made some brackets from 1/4 inch plate
0 2020/04/27 10:25:22
Welded them to housing on a 2 degree angle
Welded them to housing on a 2 degree angle
0 2020/04/27 10:25:31
Fabricated back brace from 1/8
Fabricated back brace from 1/8
0 2020/04/27 10:25:39
Lazer says it’s centered . Wishbone in background
Lazer says it’s centered . Wishbone in background
0 2020/04/27 10:25:47
Welded the brackets together first
Welded the brackets together first
0 2020/04/27 10:25:58
Safety first
Safety first
0 2020/05/31 20:35:28
Making progress
Making progress
0 2020/05/31 20:36:00
0 2020/05/31 20:37:25
Hanging the doors
Hanging the doors
0 2020/06/24 20:50:16
Fitting the front clip
Fitting the front clip
0 2020/07/02 14:34:04
0 2020/09/09 11:30:50
0 2020/09/09 11:30:57
Got the radiator and fuel cells mounted.
Got the radiator and fuel cells mounted.
0 2020/09/09 11:31:55
Getting complicated
Getting complicated
0 2020/09/09 11:32:20
0 2020/09/09 11:32:50
Trying to size my wheels with a mock up wheel from a friends car
Trying to size my wheels with a mock up wheel from a friends car
0 2020/09/09 11:33:16
Test fitting front wheels and tires
Test fitting front wheels and tires
0 2020/11/17 08:58:34
Welding in driver side floor pans. I made them out of 22 gauge, bead rolled and hammer formed around the tubes
Welding in driver side floor pans. I made them out of 22 gauge, bead rolled and hammer formed around the tubes
0 2020/11/17 08:58:57
Finished driver side floor and seat
Finished driver side floor and seat
0 2021/04/04 13:03:59
0 2021/04/04 13:04:06
Hopefully cut this right
Hopefully cut this right
0 2021/04/04 13:04:13
It fits
It fits
0 2021/04/04 13:04:21
Powder coated
Powder coated
0 2021/04/04 13:04:27
Powder coated
Powder coated
0 2025/10/04 09:25:26
Ready for paint
Ready for paint
0 2025/10/04 09:26:35
Body w
Body w
0 2025/10/04 09:27:05
Waiting for the pinstriper
Waiting for the pinstriper
0 2025/10/04 09:27:35