Third Generation F-Body Message Boards
I am not sure if this bracket was factory or not. It really doesnt do much now, but helped to hold it in while the sealer set up.
I am not sure if this bracket was factory or not. It really doesnt do much now, but helped to hold it in while the sealer set up.
0 2011/10/19 23:20:40
This is 1/4" Lexan that I installed with windshield adhesive bought from O riley auto. I cut a cardboard pattern of the back window and traced it onto the Lexan I bought. Then cut it out with my jig saw
This is 1/4" Lexan that I installed with windshield adhesive bought from O riley auto. I cut a cardboard pattern of the back window and traced it onto the Lexan I bought. Then cut it out with my jig saw
0 2011/10/19 23:20:40
using the stock glass struts on a stock notchback
using the stock glass struts on a stock notchback
0 2011/10/19 22:28:56
clearanced for strut, going to remove hatch and smooth and reglass, then and paint it next.
clearanced for strut, going to remove hatch and smooth and reglass, then and paint it next.
0 2011/10/19 22:22:39
clearnce needed. will glass in and paint now
clearnce needed. will glass in and paint now
0 2011/10/19 22:22:39
C5 brakes. A must improved performance at a very low cost!
C5 brakes. A must improved performance at a very low cost!
0 2011/09/03 15:02:42
C5 brakes. didnt like th 1LE hose,Way to long! Used the C5 hose that came with the calipers when I purchased them
C5 brakes. didnt like th 1LE hose,Way to long! Used the C5 hose that came with the calipers when I purchased them
0 2011/09/03 15:02:42
test fitting 13" C5 brake assembly. Powdercoated the spindle after modifiying it. Made the adapter and powdercoated it too.
test fitting 13" C5 brake assembly. Powdercoated the spindle after modifiying it. Made the adapter and powdercoated it too.
0 2011/09/03 15:02:42
0 2011/09/03 14:52:43
0 2011/09/03 14:52:43
original 88 TA notchback
original 88 TA notchback
0 2011/08/21 03:11:11
not happy with the tint on rear window, but ok for now
not happy with the tint on rear window, but ok for now
0 2011/08/21 03:05:43
done for now, still cant make up my mind about the rear spoiler height yet
done for now, still cant make up my mind about the rear spoiler height yet
0 2011/08/21 03:05:43
this is after welding shut the original spoiler holes and doing some body work
this is after welding shut the original spoiler holes and doing some body work
0 2011/08/11 19:42:05
just waiting on my rear window
just waiting on my rear window
0 2011/08/11 19:42:05
Still cant make up my mind if i want it on or not. It really changes the way the car looks. I like it both ways, so which way to go?
Still cant make up my mind if i want it on or not. It really changes the way the car looks. I like it both ways, so which way to go?
0 2011/07/10 20:41:12
Test fitting notch onto camaro with the new spoiler mounts
Test fitting notch onto camaro with the new spoiler mounts
0 2011/07/10 20:41:12
changing the spoiler mount from 6" riser to a aluminum 3" riser
changing the spoiler mount from 6" riser to a aluminum 3" riser
0 2011/07/02 06:12:16
Body work mostly done, decided that the 6" riser for the spoiler was a little to ricy and had to change it to one thats 3". going to make these from aluminum
Body work mostly done, decided that the 6" riser for the spoiler was a little to ricy and had to change it to one thats 3". going to make these from aluminum
0 2011/07/02 06:12:16
Most of the body repairs are done. Just have to make and change out the spoiler risers to 3" aluminum
Most of the body repairs are done. Just have to make and change out the spoiler risers to 3" aluminum
0 2011/07/02 01:24:40
Made custom stainless steel brackets that are 6" taller. These will be covered in fiberglassed to have the same shape as the original mounts
Made custom stainless steel brackets that are 6" taller. These will be covered in fiberglassed to have the same shape as the original mounts
0 2011/06/18 13:19:57
This is after about 4hrs of sanding
This is after about 4hrs of sanding
0 2011/06/18 13:19:57
its all original, included the vin tag, hinges, and the latch plate
its all original, included the vin tag, hinges, and the latch plate
0 2011/06/18 13:19:57
20lbs NOS tucked into the spare tire wheel well
20lbs NOS tucked into the spare tire wheel well
0 2011/05/19 18:57:22
Crome powdercoated Holley Stealthram
Crome powdercoated Holley Stealthram
0 2011/05/19 18:52:47
Fully ported w/enlarged runners & Crome powdercoated
Fully ported w/enlarged runners & Crome powdercoated
0 2011/05/19 18:52:47
WCT 5 Powdercoated
WCT 5 Powdercoated
0 2010/09/26 23:50:46
285 rear
285 rear
0 2010/09/20 01:12:43
85 Z28, 355 TPI, WC T-5, 3.42, 150 NOS, Konig 17X9.5 w/285/40/17, harwood 4" bolt on
85 Z28, 355 TPI, WC T-5, 3.42, 150 NOS, Konig 17X9.5 w/285/40/17, harwood 4" bolt on
0 2010/06/02 09:16:21