Third Generation F-Body Message Boards
0 2015/10/24 10:21:37
0 2015/10/24 10:21:20
0 2015/10/24 09:59:58
I bought the new terminals from NAPA. Part number: 725157.
I bought the new terminals from NAPA. Part number: 725157.
0 2015/10/24 09:59:56
What I did with the wire leaving the level sensor, was combine it into the same terminal as the motor's ground wire. On the left is the motor's power wire. Not shown is the pink/purple level sensor input wire.
What I did with the wire leaving the level sensor, was combine it into the same terminal as the motor's ground wire. On the left is the motor's power wire. Not shown is the pink/purple level sensor input wire.
0 2015/10/24 09:59:53
I simply removed the wire I wasn't going to use.
I simply removed the wire I wasn't going to use.
0 2015/10/24 09:56:37
One of these tools is really handy to have to remove terminals from connectors. You may be able to achieve the same results with a micro screwdriver or small paper clip.
One of these tools is really handy to have to remove terminals from connectors. You may be able to achieve the same results with a micro screwdriver or small paper clip.
0 2015/10/24 09:54:36
A quick 3rd Gen fuel pump and level sensor diagram. Note how the wire leaving the level sensor splices to the same ground wire as the pump. This then grounds out under the center console.
A quick 3rd Gen fuel pump and level sensor diagram. Note how the wire leaving the level sensor splices to the same ground wire as the pump. This then grounds out under the center console.
0 2015/10/24 09:51:04
I bought a fuel level sensor from Ebay that reads the correct range. Its made by Herko. Part Number:GFC31.
I bought a fuel level sensor from Ebay that reads the correct range. Its made by Herko. Part Number:GFC31.
0 2015/10/24 09:26:01
A new strainer for the 4th Gen module.
A new strainer for the 4th Gen module.
0 2015/10/24 09:19:36
Connected the 3/16 hose the the tee.
Connected the 3/16 hose the the tee.
0 2015/10/24 09:18:46
I had to trim and position the hose clamps in a way to make sure they wouldn't contact the wires when installed. Don't want them rubbing through the insulation.
I had to trim and position the hose clamps in a way to make sure they wouldn't contact the wires when installed. Don't want them rubbing through the insulation.
0 2015/10/24 09:17:38
I put a 3rd Gen strainer on the bottom of the TBI pump.
I put a 3rd Gen strainer on the bottom of the TBI pump.
0 2015/10/24 09:14:08
0 2015/10/24 09:13:39
The 3/16 hose going to the bottom of the module. With the pressure being so minor, I felt comfortable securing it with a good zip tie.
The 3/16 hose going to the bottom of the module. With the pressure being so minor, I felt comfortable securing it with a good zip tie.
0 2015/10/24 09:04:47
The part that connects to the bottom of the module needs a male connection, so I cut a portion of the original line to secure to the 3/16 hose.
The part that connects to the bottom of the module needs a male connection, so I cut a portion of the original line to secure to the 3/16 hose.
0 2015/10/24 09:03:11
I used a vacuum tee: 3/8x3/16x3/8 part number 717663 from O'Reillys to create the second feed for the pump module.
I used a vacuum tee: 3/8x3/16x3/8 part number 717663 from O'Reillys to create the second feed for the pump module.
0 2015/10/24 08:54:04
TBI pump fits perfect in the 4th Gen's rubber insulator.
TBI pump fits perfect in the 4th Gen's rubber insulator.
0 2015/10/24 08:28:32
Disassembled GM fuel pump module.
Disassembled GM fuel pump module.
0 2015/10/24 07:59:49
Disassembled GM fuel pump module.
Disassembled GM fuel pump module.
0 2015/10/24 07:57:21
The Bird is home.
The Bird is home.
0 2015/10/24 07:43:16
0 2015/03/10 08:12:38
0 2015/03/10 08:12:30
still looks a lil roomy surprisingly
still looks a lil roomy surprisingly
0 2012/09/09 00:57:15
first test fitting
first test fitting
0 2012/09/09 00:57:15
63297 127350820648826 856581 n
63297 127350820648826 856581 n
0 2012/08/07 01:35:42
309424 419729234744315 877879255 n
309424 419729234744315 877879255 n
0 2012/08/07 01:35:01
poncho 400
poncho 400
0 2012/06/06 14:02:27