Third Generation F-Body Message Boards
0 2016/11/13 16:59:04
0 2016/11/13 16:58:55
Did these for now. In the near future I plan on lower the car once I figure out what size tires and rims Im going with.
Did these for now. In the near future I plan on lower the car once I figure out what size tires and rims Im going with.
0 2016/11/13 16:58:48
0 2016/11/13 16:54:00
I think I did good for the first time. I put down three coats of black and red. I don't know how long its all going to hold up. But since it will not be a show car I guess it will be ok.
I think I did good for the first time. I put down three coats of black and red. I don't know how long its all going to hold up. But since it will not be a show car I guess it will be ok.
0 2016/11/13 16:53:52
Removed all the rust with wire brush wheel and sandpaper.
Removed all the rust with wire brush wheel and sandpaper.
0 2016/11/13 16:53:45
This is where I got real nervous! I never messed with a rear end. With the help of a few threads on this site and the Google I took it all apart inspected, cleaned and replace the bearings and top it off with new fluid. Shout out to my buddy that had the toys I need to put it all back together,
This is where I got real nervous! I never messed with a rear end. With the help of a few threads on this site and the Google I took it all apart inspected, cleaned and replace the bearings and top it off with new fluid. Shout out to my buddy that had the toys I need to put it all back together,
0 2016/11/13 16:50:03
I had a leak so I got a pinion seal kit.
I had a leak so I got a pinion seal kit.
0 2016/11/13 16:49:55
0 2016/11/13 16:47:22
0 2016/11/13 16:47:16
I strugled all day at work on if I want to by a sand blaster or just use a little elbow greese and get it done. Degreaser and a scrub brush, but I must say oven cleaner worked best
I strugled all day at work on if I want to by a sand blaster or just use a little elbow greese and get it done. Degreaser and a scrub brush, but I must say oven cleaner worked best
0 2016/11/13 16:45:34
With minimum work got it out.
With minimum work got it out.
0 2016/11/13 16:45:20
0 2016/11/13 16:43:29
0 2016/11/13 16:43:18
0 2016/11/13 16:41:40
0 2016/09/13 17:05:32
0 2016/09/13 17:05:01
0 2016/03/21 20:56:38
From the front
From the front
0 2015/12/18 14:18:40
0 2015/12/18 14:18:00
0 2015/12/18 14:16:40
0 2015/12/18 14:16:19
0 2015/12/16 06:58:39
0 2015/12/16 06:57:22
o2 sensor and pig tail the original one was hacked off.
o2 sensor and pig tail the original one was hacked off.
0 2015/12/16 06:54:20
0 2015/12/08 16:10:11
Do anyone know where this plug into. It is located on the passage side.
Do anyone know where this plug into. It is located on the passage side.
0 2015/11/13 18:16:17
These wires is on the passage side under the car.
These wires is on the passage side under the car.
0 2015/11/13 18:14:11
Power washed it down. Still have a long way to go.
Power washed it down. Still have a long way to go.
0 2015/11/07 15:54:52
Cant decide which tail lights I like best. Might keep it original and sell the grid ones.
Cant decide which tail lights I like best. Might keep it original and sell the grid ones.
0 2015/11/07 15:51:58
Just a few parts. Much needed vacuum hoses.
Just a few parts. Much needed vacuum hoses.
0 2015/11/07 15:50:01
0 2015/10/31 14:21:05
In with the new
In with the new
0 2015/10/31 14:19:57
Out with the old
Out with the old
0 2015/10/31 14:18:40
That South Carolina heat is something else!
That South Carolina heat is something else!
0 2015/10/31 14:17:24
0 2015/10/31 14:16:21
0 2015/10/31 14:13:32
That South Carolina heat is something else
That South Carolina heat is something else
0 2015/10/31 14:12:02
0 2015/10/31 14:09:45
0 2015/10/31 14:05:31