Third Generation F-Body Message Boards
0 2025/03/16 18:40:16
0 2021/12/14 07:04:53
0 2021/06/03 05:36:27
0 2021/06/03 05:36:21
0 2021/01/04 15:12:20
0 2021/01/04 15:11:26
0 2021/01/04 15:10:36
0 2021/01/04 15:09:30
Checked a lot of things before I found this brittle near broken wire that explained why the test light kept having problems
Checked a lot of things before I found this brittle near broken wire that explained why the test light kept having problems
0 2021/01/04 15:04:41
0 2020/10/24 09:47:06
I also installed a wireless charger for my phone.
I also installed a wireless charger for my phone.
0 2020/09/10 16:56:50
Final product, Got my new shifter plate and boot from Hawks, as well as the 6-speed sticker.
Final product, Got my new shifter plate and boot from Hawks, as well as the 6-speed sticker.
0 2020/09/10 16:56:46
to get it in position I had to reach under the radio and push up as I got the screws tight
to get it in position I had to reach under the radio and push up as I got the screws tight
0 2020/09/10 16:56:23
Final mounting, Its hard against the screw holes on both sides and its still a snug fit
Final mounting, Its hard against the screw holes on both sides and its still a snug fit
0 2020/09/10 16:56:19
pro-tip, when putting the dashpad screws in, lay a towel down so you don't drop the screws in your carpet
pro-tip, when putting the dashpad screws in, lay a towel down so you don't drop the screws in your carpet
0 2020/09/10 16:56:16
all the wires tucked up
all the wires tucked up
0 2020/09/10 16:55:40
The view from the front
The view from the front
0 2020/09/10 16:55:36
Here is the detector with the mirror mount, and the front dash cam installed. I'm waiting until I can get new back window tint before mounting the back camera
Here is the detector with the mirror mount, and the front dash cam installed. I'm waiting until I can get new back window tint before mounting the back camera
0 2020/09/10 16:55:24
0 2020/09/10 16:54:45
keeps the wires nice and tight going up the a-pillar, I have a lot of wires here due to the triple gauge pillar
keeps the wires nice and tight going up the a-pillar, I have a lot of wires here due to the triple gauge pillar
0 2020/09/10 16:54:42
I use this for network wire bundling, its really helpful in cars as well.
I use this for network wire bundling, its really helpful in cars as well.
0 2020/09/10 16:54:40
drop the wires down in the middle to test fit
drop the wires down in the middle to test fit
0 2020/09/10 16:53:45
Up the a-pillar and then tuck all the extra wires into the head liner
Up the a-pillar and then tuck all the extra wires into the head liner
0 2020/09/10 16:53:35
0 2020/09/10 16:52:29
at the top, clip it to the dash side
at the top, clip it to the dash side
0 2020/09/10 16:52:26
After you tap the fuses pull the wires to above the hood release and into the trim outside the dash. I ran it on the outside of the trim, there is tons of room.
After you tap the fuses pull the wires to above the hood release and into the trim outside the dash. I ran it on the outside of the trim, there is tons of room.
0 2020/09/10 16:52:22
Holy mess of wires from the 90s alarm installer. One of my projects is going to be removing this
Holy mess of wires from the 90s alarm installer. One of my projects is going to be removing this
0 2020/09/10 16:52:01
Plugged in on the floor to make sure everything powers up
Plugged in on the floor to make sure everything powers up
0 2020/09/10 16:51:53
Again, I wrapped the extra wire on the foam block and dropped the wire down
Again, I wrapped the extra wire on the foam block and dropped the wire down
0 2020/09/10 16:51:01
Here is the mic clipped on for test fitting the wire length
Here is the mic clipped on for test fitting the wire length
0 2020/09/10 16:50:43
Here is the mic I needed to run up the pillar
Here is the mic I needed to run up the pillar
0 2020/09/10 16:50:31
I wrapped all the extra GPS wire around this foam block, I left enough wire for the GPS to go to the windshield and then back half way up the dash pad
I wrapped all the extra GPS wire around this foam block, I left enough wire for the GPS to go to the windshield and then back half way up the dash pad
0 2020/09/10 16:50:16
Here I am pulling the first wire
Here I am pulling the first wire
0 2020/09/10 16:50:02
In the middle of the dash is a lot of room above the radio, just drop the wires here over and over until you can see them show up in the console.
In the middle of the dash is a lot of room above the radio, just drop the wires here over and over until you can see them show up in the console.
0 2020/09/10 16:49:50
I also installed a wireless charger for my phone.
I also installed a wireless charger for my phone.
0 2020/09/10 16:40:07
Final product, Got my new shifter plate and boot from Hawks, as well as the 6-speed sticker.
Final product, Got my new shifter plate and boot from Hawks, as well as the 6-speed sticker.
0 2020/09/10 16:40:03
to get it in position I had to reach under the radio and push up as I got the screws tight
to get it in position I had to reach under the radio and push up as I got the screws tight
0 2020/09/10 16:39:59
Final mounting, Its hard against the screw holes on both sides and its still a snug fit
Final mounting, Its hard against the screw holes on both sides and its still a snug fit
0 2020/09/10 16:39:56
pro-tip, when putting the dashpad screws in, lay a towel down so you don't drop the screws in your carpet
pro-tip, when putting the dashpad screws in, lay a towel down so you don't drop the screws in your carpet
0 2020/09/10 16:39:52
putting the a-pillar back in
putting the a-pillar back in
0 2020/09/10 16:39:49