Third Generation F-Body Message Boards
I was looking at tomsaddy's amazing car this morning, saw he had totally Dynomatted his interior. I ordered some peel and seal, and will add to the doors, roof and anywhere else I can. I also ordered a box of the 3M strip caulk as I will need more for the mylar as well as to recover the little access hole for the lower hinge bolts. But yes, finally winning again is nice after all the door frustrations.
I was looking at tomsaddy's amazing car this morning, saw he had totally Dynomatted his interior. I ordered some peel and seal, and will add to the doors, roof and anywhere else I can. I also ordered a box of the 3M strip caulk as I will need more for the mylar as well as to recover the little access hole for the lower hinge bolts. But yes, finally winning again is nice after all the door frustrations.
0 2021/04/18 08:33:59
Also replaced the window motor. Took some finagling to get the small fasteners in and out, but done.
Also replaced the window motor. Took some finagling to get the small fasteners in and out, but done.
0 2021/04/17 18:49:22
0 2021/04/17 18:48:45
0 2021/04/17 18:48:01
0 2021/04/17 18:47:16
0 2021/04/16 17:47:56
0 2021/04/16 17:45:54
0 2021/04/16 17:44:56
Ready for bushings
Ready for bushings
0 2021/04/15 17:26:10
Kind of a good thing, found rust I had overlooked before, welded new sheet metal and soaked with POR15.
Kind of a good thing, found rust I had overlooked before, welded new sheet metal and soaked with POR15.
0 2021/04/15 17:23:53
Blew my doors off!!
Blew my doors off!!
0 2021/04/15 17:22:53
New home for the night, removed the old upper bushings. All new should be delivered tomorrow.
New home for the night, removed the old upper bushings. All new should be delivered tomorrow.
0 2021/04/15 17:20:53
Pulled all electrical from the door. Just like the video.
Pulled all electrical from the door. Just like the video.
0 2021/04/15 17:19:41
Naked again, don't look Ethel!
Naked again, don't look Ethel!
0 2021/04/15 17:18:18
Except the door closes, but is still a half inch open, help!
Except the door closes, but is still a half inch open, help!
0 2021/04/14 18:11:28
Finally one thing is finished and buttoned up!
Finally one thing is finished and buttoned up!
0 2021/04/14 18:10:25
0 2021/04/14 18:09:34
Replaced handle and lock cylinder, sweepers and inner door handle, also door weather stripping. Seems like everything having to do with the door is a royal PITA. Those little blue weatherstrip anchors are possessed!
Replaced handle and lock cylinder, sweepers and inner door handle, also door weather stripping. Seems like everything having to do with the door is a royal PITA. Those little blue weatherstrip anchors are possessed!
0 2021/04/14 18:06:10
Did I say how much fun I am having???
Did I say how much fun I am having???
0 2021/04/12 17:37:27
Still have to drill the new pin holes in the upper card, another photo op, and of course there is Nuc.
Still have to drill the new pin holes in the upper card, another photo op, and of course there is Nuc.
0 2021/04/12 17:35:07
Still have to replace the lock cylinder otherwise would be done!
Still have to replace the lock cylinder otherwise would be done!
0 2021/04/12 17:33:34
Drilled for the retaining sheet metal nuts. Painted the spike strips with the SEM trim black. Looking nice
Drilled for the retaining sheet metal nuts. Painted the spike strips with the SEM trim black. Looking nice
0 2021/04/12 17:31:29
0 2021/04/12 17:24:44
For reference
For reference
0 2021/04/11 17:08:04
0 2021/04/11 17:02:35
0 2021/04/11 17:01:40
For reference
For reference
0 2021/04/11 17:00:20
I decided to go with the black vinyl on this panel, left the old fabric with the padding. I think it will better meld with the black dash coming around the corner. I only cemented the edges so the foam was unaffected.
I decided to go with the black vinyl on this panel, left the old fabric with the padding. I think it will better meld with the black dash coming around the corner. I only cemented the edges so the foam was unaffected.
0 2021/04/11 16:56:52
Plan to paint the cardboard with some low viscosity epoxy I had left over from the boat. Hopefully make i a little more weather impervious.
Plan to paint the cardboard with some low viscosity epoxy I had left over from the boat. Hopefully make i a little more weather impervious.
0 2021/04/11 16:54:44
Many tears and cracks, will reinforce with some oak strips, remnants from a previous woodworking project.
Many tears and cracks, will reinforce with some oak strips, remnants from a previous woodworking project.
0 2021/04/11 16:52:01
Finally figured out how to remove these pesky nuts after I ripped out the door cardboard.
Finally figured out how to remove these pesky nuts after I ripped out the door cardboard.
0 2021/04/11 16:49:58
Impressive spike strips to hold the trim piece in
Impressive spike strips to hold the trim piece in
0 2021/04/11 16:48:54
Started on the door cards today
Started on the door cards today
0 2021/04/11 16:47:06
Boring window switches from another angle. :)
Boring window switches from another angle. :)
0 2021/04/10 17:13:18
0 2021/04/10 17:12:01
0 2021/04/10 17:11:37
0 2021/04/10 17:08:56
Same question with this thing?
Same question with this thing?
0 2021/04/10 17:07:04
I do not remember disconnecting, but it looks important. Anyone know what it is?
I do not remember disconnecting, but it looks important. Anyone know what it is?
0 2021/04/10 17:05:48
0 2021/04/10 17:05:09