Third Generation F-Body Message Boards
Ran the wiring thru the firewall and installed a switch. Here are the dim DRLs
Ran the wiring thru the firewall and installed a switch. Here are the dim DRLs
0 2021/07/04 15:32:48
0 2021/07/04 15:31:20
Installed the sub bumper support, reminds me of Mad Max!
Installed the sub bumper support, reminds me of Mad Max!
0 2021/07/04 15:29:58
0 2021/07/04 15:29:11
Formally attached the bumper to the upper support using some extra hurricane straps as straightener/washer plates. Now I am good to 155 mph.
Formally attached the bumper to the upper support using some extra hurricane straps as straightener/washer plates. Now I am good to 155 mph.
0 2021/07/04 15:26:41
Ordered all new u-nuts and fasteners from "clips and fasteners" (thanks Battman). I thought the zinc screws would look nice against the black, and they do.
Ordered all new u-nuts and fasteners from "clips and fasteners" (thanks Battman). I thought the zinc screws would look nice against the black, and they do.
0 2021/07/04 03:51:31
0 2021/07/04 03:50:36
Putting the nose back on, finally looking like a real F body again!
Putting the nose back on, finally looking like a real F body again!
0 2021/07/04 03:48:48
Looks a lot more professional
Looks a lot more professional
0 2021/07/04 03:47:12
Works for me! Hope this helps
Works for me! Hope this helps
0 2021/06/30 17:50:46
0 2021/06/30 17:50:21
0 2021/06/30 17:48:16
With a cutoff wheel, removed about 3 inches of the lip around the hole to allow the light bracket to seat. Next view is from the front.
With a cutoff wheel, removed about 3 inches of the lip around the hole to allow the light bracket to seat. Next view is from the front.
0 2021/06/30 17:46:24
Drilled a mounting hole to center the light in the opening of the louver panel (each side).
Drilled a mounting hole to center the light in the opening of the louver panel (each side).
0 2021/06/30 17:44:38
Mounted the lights to the aluminum support with a few modifications.
Mounted the lights to the aluminum support with a few modifications.
0 2021/06/30 17:43:12
Or Bright! I think they look pretty cool.
Or Bright! I think they look pretty cool.
0 2021/06/29 15:56:51
They can be dim,
They can be dim,
0 2021/06/29 15:56:06
Just one transmission oil cooler looked inadequate, so plumbed in another in series.
Just one transmission oil cooler looked inadequate, so plumbed in another in series.
0 2021/06/28 17:18:54
Ordered a replacement gauge cluster on eBay, and replaced today. Now all are working perfect!!!! Yes, I am almost out of gas!! So nice to have real gauges again.
Ordered a replacement gauge cluster on eBay, and replaced today. Now all are working perfect!!!! Yes, I am almost out of gas!! So nice to have real gauges again.
0 2021/06/28 17:12:07
Just one transmission oil cooler looked inadequate, so added another on in series.
Just one transmission oil cooler looked inadequate, so added another on in series.
0 2021/06/28 17:10:32
New one pressure blasted and ready for POR 15.
New one pressure blasted and ready for POR 15.
0 2021/06/28 17:09:16
0 2021/06/28 17:08:40
0 2021/06/28 17:07:59
Got the old rusty bumper support out.
Got the old rusty bumper support out.
0 2021/06/28 17:07:01
Old rusty bumper support removed
Old rusty bumper support removed
0 2021/06/28 16:56:49
0 2021/06/28 16:56:01
Old rusty part gone
Old rusty part gone
0 2021/06/28 16:55:00
Recharged and it is blowing cold again, I figure in was running in the 450+ psi range when the relief valve blew, now around 250/40 psi.
Recharged and it is blowing cold again, I figure in was running in the 450+ psi range when the relief valve blew, now around 250/40 psi.
0 2021/06/28 16:46:24
Sucked it down to almost 30 inches
Sucked it down to almost 30 inches
0 2021/06/28 16:45:38
Nuke is my black and gold color reference card.
Nuke is my black and gold color reference card.
0 2021/06/28 16:43:36
Frost out on the pumpkin', blowin' cold. Woven loom looks pretty good too. Those are the old AC hoses BTW.
Frost out on the pumpkin', blowin' cold. Woven loom looks pretty good too. Those are the old AC hoses BTW.
0 2021/06/25 16:40:01
Charged the system, note clamp holding trigger so I don't have to.
Charged the system, note clamp holding trigger so I don't have to.
0 2021/06/25 16:38:51
Installed AC plumbing and replaced melted loom with a woven type that looks pretty good.
Installed AC plumbing and replaced melted loom with a woven type that looks pretty good.
0 2021/06/25 16:37:18
Looks like the BLM is pretty good at 108, 127.5 is optimum
Looks like the BLM is pretty good at 108, 127.5 is optimum
0 2021/06/24 16:16:36
0 2021/06/24 16:16:02
Hooked up my new ac comp pigtail. Old one had a diode, new one not so much. Hope it doesn't matter.
Hooked up my new ac comp pigtail. Old one had a diode, new one not so much. Hope it doesn't matter.
0 2021/06/24 16:02:05
My gauges have a greenish glow, so goes good with the aux gauges, and they dim nicely when you turn the lights on
My gauges have a greenish glow, so goes good with the aux gauges, and they dim nicely when you turn the lights on
0 2021/06/24 16:00:29
0 2021/06/24 15:59:17
This was the "before" a couple days ago
This was the "before" a couple days ago
0 2021/06/24 15:54:12
Sweet!!!
Sweet!!!
0 2021/06/21 17:20:43