Third Generation F-Body Message Boards
I needed these door panels the worst and they are for roll up windows too. The armrests are not used since the car is caged.
I needed these door panels the worst and they are for roll up windows too. The armrests are not used since the car is caged.
0 2024/05/28 20:49:49
Still has its 90's mag wheels on it, lol.
Still has its 90's mag wheels on it, lol.
0 2024/05/28 20:49:41
0 2024/05/25 21:06:45
Coil bracket painted.
Coil bracket painted.
0 2024/05/25 21:06:38
New grommets in both valve covers.
New grommets in both valve covers.
0 2024/05/25 21:06:31
Cleaned and painted.
Cleaned and painted.
0 2024/05/25 21:06:25
Passenger heat shield removed. Also pulled the crank pulley while I was in there.
Passenger heat shield removed. Also pulled the crank pulley while I was in there.
0 2024/05/25 21:06:17
0 2024/05/23 19:06:36
0 2024/05/23 19:05:31
0 2024/05/23 00:53:00
0 2024/05/23 00:52:52
0 2024/05/23 00:52:43
0 2024/05/23 00:52:34
0 2024/05/23 00:52:26
0 2024/05/23 00:52:16
Bumper cover is ready for final sanding now.
Bumper cover is ready for final sanding now.
0 2024/05/17 22:19:45
Moved a whole pile of steel tubing and other metals that I had for fabricating out from behind it today so I can better clean the shop before spraying high build.
Moved a whole pile of steel tubing and other metals that I had for fabricating out from behind it today so I can better clean the shop before spraying high build.
0 2024/05/17 22:19:37
Still need to line everything up but needed to get the last coats of epoxy on it today.
Still need to line everything up but needed to get the last coats of epoxy on it today.
0 2024/05/17 22:19:29
0 2024/05/16 23:29:15
0 2024/05/16 23:29:08
0 2024/05/16 23:29:00
This is just the epoxy primer. I will prob put 2 more coats on it but dont see any reason to spray high build on the bumper cover.
This is just the epoxy primer. I will prob put 2 more coats on it but dont see any reason to spray high build on the bumper cover.
0 2024/05/15 22:40:01
Between the new compressor keeping up better and a new spray gun I am getting better spray out than before.
Between the new compressor keeping up better and a new spray gun I am getting better spray out than before.
0 2024/05/15 22:39:54
2 coats of epoxy today.
2 coats of epoxy today.
0 2024/05/15 22:39:47
Needs just a little more work at the center body line.
Needs just a little more work at the center body line.
0 2024/05/15 22:39:39
0 2024/05/15 02:01:40
I'm not sure the bolts and studs are in the correct places yet so dont use these pics for reference.
I'm not sure the bolts and studs are in the correct places yet so dont use these pics for reference.
0 2024/05/15 02:01:33
I still need a passenger side heat shield but just mocking stuff up.
I still need a passenger side heat shield but just mocking stuff up.
0 2024/05/15 02:01:26
Passenger side.
Passenger side.
0 2024/05/15 02:01:19
Driver side manifold. It has been surfaced as well.
Driver side manifold. It has been surfaced as well.
0 2024/05/15 02:01:12
Running them through a die.
Running them through a die.
0 2024/05/15 02:01:05
Exhaust bolts after soaking overnight. I have extras so need to figure out which ones go where.
Exhaust bolts after soaking overnight. I have extras so need to figure out which ones go where.
0 2024/05/15 02:00:58
0 2024/05/15 01:54:04
Just set them back on the intake.
Just set them back on the intake.
0 2024/05/15 01:53:56
Satin black.
Satin black.
0 2024/05/15 01:53:49
Setting them up to spray the heads.
Setting them up to spray the heads.
0 2024/05/15 01:53:42
Came out pretty decent.
Came out pretty decent.
0 2024/05/15 01:53:35
Back in the ultrasonic.
Back in the ultrasonic.
0 2024/05/15 01:53:28
Running them through a die to clean the threads.
Running them through a die to clean the threads.
0 2024/05/15 01:53:20
0 2024/05/11 21:11:31