Third Generation F-Body Message Boards
Mostly back in. I have to dig up one of the nuts.
Mostly back in. I have to dig up one of the nuts.
0 2024/03/04 01:02:22
Starting the column back in.
Starting the column back in.
0 2024/03/04 01:02:12
New seal installed. I punched the holes out before putting it back in the car.
New seal installed. I punched the holes out before putting it back in the car.
0 2024/03/04 01:02:02
Rough template just for the outer shape.
Rough template just for the outer shape.
0 2024/03/04 01:01:52
Cleaned the flange up and then repainted it.
Cleaned the flange up and then repainted it.
0 2024/03/04 01:01:41
Start of making a pattern to make a new seal between the mounting plate and firewall.
Start of making a pattern to make a new seal between the mounting plate and firewall.
0 2024/03/04 01:01:30
Assemmbly breakdown.
Assemmbly breakdown.
0 2024/02/25 00:37:01
These came from another rebuilt throttle body that I had and interestingly the rebuilder used these instead of the torx headed ones that are prone to wringing off.
These came from another rebuilt throttle body that I had and interestingly the rebuilder used these instead of the torx headed ones that are prone to wringing off.
0 2024/02/25 00:36:51
Setting the coolant plate on.
Setting the coolant plate on.
0 2024/02/25 00:36:41
Lower gasket.
Lower gasket.
0 2024/02/25 00:36:30
Rebuild kit.
Rebuild kit.
0 2024/02/25 00:36:20
Ran the throttle body top in the ultrasonic and the lower coolant plate had been metal blasted and baked.
Ran the throttle body top in the ultrasonic and the lower coolant plate had been metal blasted and baked.
0 2024/02/25 00:36:09
Throttle bracket back on and just mocking up the maf and tubes.
Throttle bracket back on and just mocking up the maf and tubes.
0 2024/02/25 00:27:09
Hose added.
Hose added.
0 2024/02/25 00:26:59
The car was converted in 89 to do away with the 9th injector but for now I went ahead and reinstalled the sensor for it.
The car was converted in 89 to do away with the 9th injector but for now I went ahead and reinstalled the sensor for it.
0 2024/02/25 00:26:50
Vacuum fitting installed. Waiting on a fast response IAT sensor to get here for the open hole.
Vacuum fitting installed. Waiting on a fast response IAT sensor to get here for the open hole.
0 2024/02/25 00:26:40
0 2024/02/25 00:26:31
Resealing the vacuum fittings before reinstalling them.
Resealing the vacuum fittings before reinstalling them.
0 2024/02/25 00:26:21
Plenum fittings tagged.
Plenum fittings tagged.
0 2024/02/25 00:26:11
I always bag and tag parts when taking them apart. I had taken several TPI units apart so bagged each separate.
I always bag and tag parts when taking them apart. I had taken several TPI units apart so bagged each separate.
0 2024/02/25 00:26:01
Water neck added.
Water neck added.
0 2024/02/25 00:25:51
Injectors and rail bolted back to the lower intake.
Injectors and rail bolted back to the lower intake.
0 2024/02/25 00:25:41
88 back 9th injector rail on the left and the 89 up on the right that no longer uses the cold start injector.
88 back 9th injector rail on the left and the 89 up on the right that no longer uses the cold start injector.
0 2024/02/25 00:14:55
Injectors in the rail and ready to mate it to the intake.
Injectors in the rail and ready to mate it to the intake.
0 2024/02/25 00:14:44
0 2024/02/25 00:14:34
New locking clips.
New locking clips.
0 2024/02/25 00:14:24
Installing the Accel 24lb injectors.
Installing the Accel 24lb injectors.
0 2024/02/25 00:14:14
Fuel rail assembled.
Fuel rail assembled.
0 2024/02/25 00:12:57
Installing the tubes to the rail.
Installing the tubes to the rail.
0 2024/02/25 00:12:47
I still need to get an adjustable regulator but installing the block to the rail.
I still need to get an adjustable regulator but installing the block to the rail.
0 2024/02/25 00:12:38
Cleaned, metal parts repainted and new viton orings anywhere that it had rubber ones to begin with.
Cleaned, metal parts repainted and new viton orings anywhere that it had rubber ones to begin with.
0 2024/02/25 00:12:26
Passenger view.
Passenger view.
0 2024/02/24 00:32:57
I'll clean all the plastic up after the car is painted and then will seal it.
I'll clean all the plastic up after the car is painted and then will seal it.
0 2024/02/24 00:32:48
Console just roughly setting in place.
Console just roughly setting in place.
0 2024/02/24 00:32:37
Pulling more parts from the parts car. The radio is not going in as mine was radio delete but will put it in my parts room for now.
Pulling more parts from the parts car. The radio is not going in as mine was radio delete but will put it in my parts room for now.
0 2024/02/24 00:32:28
Slowly but surely getting everything back on the firewall.
Slowly but surely getting everything back on the firewall.
0 2024/02/24 00:27:05
Wiper motor back in place.
Wiper motor back in place.
0 2024/02/24 00:26:55
Throttle cable swapped out for the nicer one.
Throttle cable swapped out for the nicer one.
0 2024/02/24 00:26:43
0 2024/02/19 02:16:49
Broken portion of the IAC valve out.
Broken portion of the IAC valve out.
0 2024/02/19 02:13:36