Third Generation F-Body Message Boards
0 2022/04/27 16:38:37
0 2022/04/27 16:37:20
0 2022/04/27 16:36:36
0 2022/04/24 21:32:48
After about 12 hours of tig welding
After about 12 hours of tig welding
0 2022/04/24 18:06:45
Fitting and preparing for welding
Fitting and preparing for welding
0 2022/04/24 18:06:29
Added extensions to the sides
Added extensions to the sides
0 2022/04/24 18:06:13
Bead rolled and shirking the pans
Bead rolled and shirking the pans
0 2022/04/24 18:05:55
0 2022/03/31 19:14:39
0 2022/03/31 19:14:33
0 2022/02/10 15:59:50
0 2022/02/10 15:28:01
0 2022/02/10 15:27:55
Here is a comparison of the actuator rods. The left one is the original and the the right one was modified. A reminder, they are mirrored, so the upper 90* is opposite.
Here is a comparison of the actuator rods. The left one is the original and the the right one was modified. A reminder, they are mirrored, so the upper 90* is opposite.
0 2022/01/22 18:14:16
0 2022/01/21 09:37:49
Added Kindigit door handles
Added Kindigit door handles
0 2022/01/15 20:38:35
TIG welded the handle frame to the door
TIG welded the handle frame to the door
0 2022/01/15 20:13:28
Cleaned up the weld seam
Cleaned up the weld seam
0 2022/01/15 20:13:22
Reassembled the handle inside the door
Reassembled the handle inside the door
0 2022/01/15 20:13:16
Complete less the body work
Complete less the body work
0 2022/01/15 20:13:09
0 2022/01/15 20:13:05
0 2022/01/15 20:13:02
0 2022/01/15 20:12:59
0 2022/01/15 20:12:51
0 2022/01/15 20:12:45
0 2022/01/15 20:12:40
0 2022/01/15 20:12:35
0 2022/01/15 20:12:29
Align the template
Align the template
0 2022/01/12 18:59:29
Cut the hole
Cut the hole
0 2022/01/12 18:59:22
Ready to weld
Ready to weld
0 2022/01/12 18:59:16
Metal work the welded panel
Metal work the welded panel
0 2022/01/12 18:59:07
0 2022/01/10 19:07:53
0 2022/01/10 19:07:47
0 2022/01/10 19:07:40
0 2022/01/10 19:07:33
0 2022/01/08 07:52:58
0 2022/01/08 07:52:54
All done. Needs body work and paint
All done. Needs body work and paint
0 2022/01/07 17:56:31
TIG weld the filler
TIG weld the filler
0 2022/01/07 17:56:25