Third Generation F-Body Message Boards
Hawks headers back from coating. O2 sensors crash into the trans so I guess I'll be welding new O2 bungs into freshly coated headers.
Hawks headers back from coating. O2 sensors crash into the trans so I guess I'll be welding new O2 bungs into freshly coated headers.
0 2015/04/29 05:02:21
LS3 intake sound attenuation cover primed, sanded, primed, sanded and ready for paint.
LS3 intake sound attenuation cover primed, sanded, primed, sanded and ready for paint.
0 2015/04/27 15:29:56
Mounted the PCM in the OEM locaton and tied up right side dash wiring.
Mounted the PCM in the OEM locaton and tied up right side dash wiring.
0 2015/04/25 12:30:05
Custom power steering line from Fluid Systems
Custom power steering line from Fluid Systems
0 2015/04/25 12:30:04
Power steering system completed
Power steering system completed
0 2015/04/25 12:30:03
I didn't like the way I did the fitting in the radiator for the steam vent. I changed it to a 90 degree fitting so the hose is going in the correct direction.
I didn't like the way I did the fitting in the radiator for the steam vent. I changed it to a 90 degree fitting so the hose is going in the correct direction.
0 2015/04/25 12:30:01
0 2015/04/18 06:47:38
0 2015/04/18 06:47:36
0 2015/04/18 06:47:35
0 2015/04/18 06:45:14
Modified power steering bracket.
Modified power steering bracket.
0 2015/04/17 05:13:35
Modified the power steering bracket so I can pass wires behind it.
Modified the power steering bracket so I can pass wires behind it.
0 2015/04/17 05:13:34
Tied up wiring to the starter so there are no issues with the headers.
Tied up wiring to the starter so there are no issues with the headers.
0 2015/04/17 05:13:32
Power steering pump on
Power steering pump on
0 2015/04/17 05:13:31
Tied up the battery lines
Tied up the battery lines
0 2015/04/17 05:13:29
Finally finished up the heater lines with the 90 degree adapter at the heater core
Finally finished up the heater lines with the 90 degree adapter at the heater core
0 2015/04/17 05:13:28
Left side harness all finished and tied up.
Left side harness all finished and tied up.
0 2015/04/15 19:21:15
Fuel system completely plumbed
Fuel system completely plumbed
0 2015/04/15 19:21:13
OBDII in a 3rd gen. I'm not using the CEL on the right side of this connector. I wired it to the OEM light.
OBDII in a 3rd gen. I'm not using the CEL on the right side of this connector. I wired it to the OEM light.
0 2015/04/15 19:21:12
Fuel feed
Fuel feed
0 2015/04/15 19:21:10
5th Gen Camaro alternator fits.
5th Gen Camaro alternator fits.
0 2015/04/15 05:00:52
Wiring loom
Wiring loom
0 2015/04/15 05:00:50
Halltech Delrin MAF housing
Halltech Delrin MAF housing
0 2015/04/15 05:00:49
FPR mounted
FPR mounted
0 2015/04/15 05:00:47
Radiator is in
Radiator is in
0 2015/04/15 05:00:45
0 2015/04/15 05:00:44
Custom made fuel line -6 adapters.
Custom made fuel line -6 adapters.
0 2015/04/15 05:00:42
New washer tank from Hawk's Third Gen
New washer tank from Hawk's Third Gen
0 2015/04/14 05:05:47
Integrating the Howell engine harness with the Pocket harness
Integrating the Howell engine harness with the Pocket harness
0 2015/04/14 05:05:46
New coolant overflow tank from Hawk's Third Gen
New coolant overflow tank from Hawk's Third Gen
0 2015/04/14 05:05:36
0 2015/04/11 19:24:13
0 2015/04/11 19:24:11
0 2015/04/11 19:20:47
0 2015/04/11 19:13:40
0 2015/04/11 19:10:23
0 2015/04/11 19:06:28
0 2015/04/11 19:05:28
0 2015/04/08 17:28:52
0 2015/04/08 17:27:04
0 2015/04/08 17:25:06