Third Generation F-Body Message Boards
Used a dremel tool and slowly made the holes bigger, not much is needed
Used a dremel tool and slowly made the holes bigger, not much is needed
0 2015/06/11 15:49:53
Cobalts and sport comp II
Cobalts and sport comp II
0 2015/06/11 15:48:09
Old set up, traced from cardboard.. really want to use the stock bezel tho
Old set up, traced from cardboard.. really want to use the stock bezel tho
0 2015/06/11 15:45:47
Old set up.. tired of it, kind of tacky temporary cluster..
Old set up.. tired of it, kind of tacky temporary cluster..
0 2015/06/11 15:41:20
0 2015/06/08 02:37:08
0 2015/06/08 02:36:49
0 2015/06/08 02:08:26
Also found this guy laying around my cousins shop and got it for 50$.. perfect cuz my pan has 2 -10an fittings welded to it,
Also found this guy laying around my cousins shop and got it for 50$.. perfect cuz my pan has 2 -10an fittings welded to it,
0 2015/06/08 01:50:43
Nice quality and came with header bolts, gaskets and collector bolts
Nice quality and came with header bolts, gaskets and collector bolts
0 2015/06/08 01:47:30
0 2015/06/08 01:43:14
0 2015/06/08 01:40:31
New plan same fittings really
New plan same fittings really
0 2015/06/08 01:25:50
0 2015/06/08 00:58:14
0 2015/06/08 00:56:59
0 2015/06/08 00:56:27
0 2015/06/08 00:55:20
0 2015/06/08 00:54:56
0 2015/06/08 00:53:53
0 2015/06/08 00:53:24
With my filter in its happy place i wound up with 20" for my feed and 22.5" for my return before fittings
With my filter in its happy place i wound up with 20" for my feed and 22.5" for my return before fittings
0 2015/06/08 00:25:29
With my filter in its happy place i wound up with 20" for my feed and 22.5" for my return before fittings
With my filter in its happy place i wound up with 20" for my feed and 22.5" for my return before fittings
0 2015/06/08 00:23:25
With my filter in its happy place i wound up with 20" for my feed and 22.5" for my return, before fittings
With my filter in its happy place i wound up with 20" for my feed and 22.5" for my return, before fittings
0 2015/06/08 00:21:16
When my filter was in its happy place i wound up with 20" feed and 22.5" return.. plus the fittings
When my filter was in its happy place i wound up with 20" feed and 22.5" return.. plus the fittings
0 2015/06/08 00:18:28
Where my filter was happy i ended up wit 20" for feed line and 22.5" for return
Where my filter was happy i ended up wit 20" for feed line and 22.5" for return
0 2015/06/08 00:15:14
Obviously measure but where my filter was happy my return line was 22.5" and feed was 20"
Obviously measure but where my filter was happy my return line was 22.5" and feed was 20"
0 2015/06/08 00:12:42
Decided on stock filter mount.. too easy
Decided on stock filter mount.. too easy
0 2015/06/08 00:11:30
Another cheap basterd trick, worked perfect tho.. not buyin a special wrench
Another cheap basterd trick, worked perfect tho.. not buyin a special wrench
0 2015/06/08 00:08:56
Cut pretty well
Cut pretty well
0 2015/06/08 00:07:47
The soft jaws were great to have, just wraped electrical tape where my mark was and used a very fine hack saw to cut it
The soft jaws were great to have, just wraped electrical tape where my mark was and used a very fine hack saw to cut it
0 2015/06/08 00:05:59
0 2015/06/07 00:00:34
To get the russel fitting to fit on the sending unit return line i had to cut it down 3/4" and sand away about .01".. not to bad
To get the russel fitting to fit on the sending unit return line i had to cut it down 3/4" and sand away about .01".. not to bad
0 2015/06/06 23:57:44
Too get the russel fitting to work on the return line i had to cut off 3/4" and sand down about .01"
Too get the russel fitting to work on the return line i had to cut off 3/4" and sand down about .01"
0 2015/06/06 23:52:51
For the russel fitting to work i cut off 3/4" and sanded it down close to .01"
For the russel fitting to work i cut off 3/4" and sanded it down close to .01"
0 2015/06/06 23:50:11
Love the look, any disadvantages in running -an instead of the hard lines?
Love the look, any disadvantages in running -an instead of the hard lines?
0 2015/06/06 23:31:28
0 2015/06/06 23:30:30
May be doing this if it wont affect the pressure at the rail.. the stock bracket that was on the wix filter fit pretty well just using the factory bracket bolt location
May be doing this if it wont affect the pressure at the rail.. the stock bracket that was on the wix filter fit pretty well just using the factory bracket bolt location
0 2015/06/06 23:21:49
0 2015/06/06 23:20:54
0 2015/06/06 23:16:42
0 2015/06/06 23:14:26
0 2015/06/06 23:13:41