Install Hurst Shifter

Q: What’s the best way to install a Hurst shifter?

A: Your best bet is to follow the service manual. This involves removing the radio and heater/AC controls and the entire console. But you need to do this to get to the bolts to the lower rubber shifter boot. The hardest part is putting back together the heater/AC control unit. Try to remember how it comes apart. Also, there are actually six bolts that hold the console on, but you need to take the top part of the console off first. This is why you need to remove the radio and ventilation controls. The last two bolts are hard to find as they are under the convenience box. Once all of the top torx screws are removed, lift up the rear convenience box to get to the rear two bolts. It’s a worthwile modification as the shifter is more positive and accurate than the sloppy stock unit, and power shifting is much better.