I really need to make this stuff go away! College starts soon and I need to get so extra cash!

third gen stuff--

88 WS6 sway bars $40
Camaro tailights 2 have black stripes, one has no stripe and are all single stripe....All are SOLD
86 IROC clean/perfect dash(Not Dash Pad)...$20

4th gen stuff---
93 firebird center consel...Broken but can be fixed easily $35
3.42 gears outta Matt87GTA 4th gen camaro, Bearings included $30
miles of interior wiring...need an odd ball connector let me know...If it has to do with dash/door panels/center consel dont bother I already swiped em

Price reduced---$900
I really would like to sell from the heads up on my motor! heres the list!

96 Vortec cyclinder heads ( New valve seals, New valve springs (.575Lift rating)) Heads are not ported
Stock 1.5 rockers
SDPC Vortec TPI base manifold w/ TPiS billet block off plates
Stock runners, Radious edges and rings smoothed out
Siamesed ported upper plenum, EGR blocks removed.
Fuel rails
Stock HEI distributer
TPiS adjustable fuel pressure regulator
Stock thermostat and water neck
MAF sensor (screens removed)
All nessasary bolts nuts and washers to bolt and go
Stock 86 ECM w/ chip, forgot the part number

I wont give up the harness because I'm stayin EFI, and the injectors, TB Im keeping for the new intake! I will possibly be selling the crank also if it turns out to be a good cranks. I'm goin 383 so I wont need the crank and possibly the rods and pistons but I may save em for a different build Im doin.

Not looking to serperate either just want to sell it all in one set. I would really prefer to have this picked up unless ur willing to pay the $100+ to have this stuff shipped out. I may be a lil slow on shipping it out cause first its still on the motor in the car and second It's quite a bit to have packaged up and sent off!
$900

thats it for right now..I have more but cant think of it all right now

 

would you sell the heads separetly?

if so how much for the vortec heads?

 

No Im not willing to seperate let me know if u'd like anything else!

Jason

 

willing to seperate them heads yet?? cause i want the heads for a decent price

 

mightymaro wants the heads,
I only want the rest of it?
would you seperate it now?
If so, what kind of price?

 

Ok heres the deal with the introduction of the Vortec HSR intake that should be out pretty soon. I will be willin to sell the intake system alone but I would then keep the heads. So 911rsq--dibs are urs on the intake stuff if the I can get my hands on a vortec intake and hopeing it doesnt go on back order..if it does then I will go back to sellin the heads and intake stuff as one kit.

Jason

 

sounds cool to me....dibs rule!
please let me know as quickly as possible, as I have the chance to buy another Z28 that has the whole setup on it. Good luck on the vortec style intake too....