10 bolt disc backing plates
Thread Starter
Supreme Member
iTrader: (35)
Joined: Aug 2006
Posts: 1,470
Likes: 1
From: Mississauga,Ont,Canada
Car: 89 IROC
Engine: LSX 6.0 370, TU2 Cam, Fast intake
Transmission: T56 w/ lots of goodies
Axle/Gears: 8.8, Posi, 4.10, 31 Spline
10 bolt disc backing plates
I need a set of 10 bolt disc backing plates to finish my rear end off. Let me know if you have a set. Thanks
Joined: Aug 1999
Posts: 19,282
Likes: 103
From: Lawrence, KS
Car: Met. Silver 85 IROC/Sold
Engine: 350 HO Deluxe (350ci/330hp)
Transmission: T-5 (Non-WC)
Axle/Gears: Limited Slip 3.23's
Re: 10 bolt disc backing plates
For iron or PBR calipers?
JamesC
JamesC
Thread Starter
Supreme Member
iTrader: (35)
Joined: Aug 2006
Posts: 1,470
Likes: 1
From: Mississauga,Ont,Canada
Car: 89 IROC
Engine: LSX 6.0 370, TU2 Cam, Fast intake
Transmission: T56 w/ lots of goodies
Axle/Gears: 8.8, Posi, 4.10, 31 Spline
Re: 10 bolt disc backing plates
They came off a 9 bolt factory disc rear so i could tell you. I think they are iron.
Thread Starter
Supreme Member
iTrader: (35)
Joined: Aug 2006
Posts: 1,470
Likes: 1
From: Mississauga,Ont,Canada
Car: 89 IROC
Engine: LSX 6.0 370, TU2 Cam, Fast intake
Transmission: T56 w/ lots of goodies
Axle/Gears: 8.8, Posi, 4.10, 31 Spline
Re: 10 bolt disc backing plates
Bump still looking for these
Thread Starter
Supreme Member
iTrader: (35)
Joined: Aug 2006
Posts: 1,470
Likes: 1
From: Mississauga,Ont,Canada
Car: 89 IROC
Engine: LSX 6.0 370, TU2 Cam, Fast intake
Transmission: T56 w/ lots of goodies
Axle/Gears: 8.8, Posi, 4.10, 31 Spline
Re: 10 bolt disc backing plates
TTT I really need these ASAP as im waiting for them to put my rear end together. If you have any or know of anyone let me know. Thanks
Thread Starter
Supreme Member
iTrader: (35)
Joined: Aug 2006
Posts: 1,470
Likes: 1
From: Mississauga,Ont,Canada
Car: 89 IROC
Engine: LSX 6.0 370, TU2 Cam, Fast intake
Transmission: T56 w/ lots of goodies
Axle/Gears: 8.8, Posi, 4.10, 31 Spline
Re: 10 bolt disc backing plates
Still looking for these as i have contacted numerous people about them and am still waiting for a reply back. So if anyone has a set i need them as in yesterday. Thanks
Trending Topics
Thread Starter
Supreme Member
iTrader: (35)
Joined: Aug 2006
Posts: 1,470
Likes: 1
From: Mississauga,Ont,Canada
Car: 89 IROC
Engine: LSX 6.0 370, TU2 Cam, Fast intake
Transmission: T56 w/ lots of goodies
Axle/Gears: 8.8, Posi, 4.10, 31 Spline
Re: 10 bolt disc backing plates
Still looking as no one likes to respond back to PM's. I have iron calipers but am willing to upgrade to PBR's if the price is decent. I just need the backing plates if you have them. Also if you are not willing to answer pm's or take e week to answer them just save yours and my time. I need these in the worst way to drive my car, so I need them like yesterday. Thanks
Thread Starter
Supreme Member
iTrader: (35)
Joined: Aug 2006
Posts: 1,470
Likes: 1
From: Mississauga,Ont,Canada
Car: 89 IROC
Engine: LSX 6.0 370, TU2 Cam, Fast intake
Transmission: T56 w/ lots of goodies
Axle/Gears: 8.8, Posi, 4.10, 31 Spline
Re: 10 bolt disc backing plates
You got a PM
Senior Member
iTrader: (1)
Joined: Oct 2004
Posts: 567
Likes: 2
Car: camaro rs
Engine: 305 tbi and 350 on stand
Transmission: 4spd auto
Re: 10 bolt disc backing plates
i have never used brand new backing plates for 10 bolt third gen style rear disc brakes. They are not for PBR style calipers.
If the ILE ones fall through and you just want some regular style I can send you mine.
I suggest you just find the gm part numbers though and get it from gmpartsdirect.com. they only seem to cost 5 bucks there.
High cost backing plates should only be those that are custom made. Like supporting both 9 and 10 bolt rears, or supporting 9 bolt rears with newer style brakes or any aftermarket brake calipers. If you want regular 10 bolt backing plates for regular 3rd gen style calipers, they shouldn't cost more than 6 bucks each plus shipping, brand new.
maybe your application requires something special,but i doubt it. Get the gm part numbers that you need, then i can compare them to mine or you can just go and get them from gm. If your setup isn't special, they shouldn't cost more than a quarter of what has been suggested here.
If the ILE ones fall through and you just want some regular style I can send you mine.
I suggest you just find the gm part numbers though and get it from gmpartsdirect.com. they only seem to cost 5 bucks there.
High cost backing plates should only be those that are custom made. Like supporting both 9 and 10 bolt rears, or supporting 9 bolt rears with newer style brakes or any aftermarket brake calipers. If you want regular 10 bolt backing plates for regular 3rd gen style calipers, they shouldn't cost more than 6 bucks each plus shipping, brand new.
maybe your application requires something special,but i doubt it. Get the gm part numbers that you need, then i can compare them to mine or you can just go and get them from gm. If your setup isn't special, they shouldn't cost more than a quarter of what has been suggested here.
Thread
Thread Starter
Forum
Replies
Last Post
hectre13
Engine/Drivetrain/Suspension Parts for Sale
2
Dec 11, 2023 08:14 AM
Eric-86sc
Engine/Drivetrain/Suspension Parts for Sale
3
Apr 3, 2016 03:52 PM
sailtexas186548
Engine/Drivetrain/Suspension Parts for Sale
8
Jan 19, 2016 12:21 PM








