Intakes, Fuel Rail, AFPR, Injectors, Runners
Intakes, Fuel Rail, AFPR, Injectors, Runners
Make Offer
Fuel Rail with Holley AFPR (SOLD)
19lb/hr Injectors $50
Ported Stock Intake (Entry ports only, non-polished finish) $100
Ports at entrance range from 1.55-1.6". Room for additional porting. I just cleaned up the entrances basically, nothing extravagant. Willing to port additional if requested, siamezing, etc.
Stock Intake with EGR Valve $50 (Can port for additional $50)
Stock Runners (NO DENTS) $50
Might have a Ported Plenum for $100
very rough porting that needs finishing. Willing to finish porting if interested
Fuel Rail with Holley AFPR (SOLD)
19lb/hr Injectors $50
Ported Stock Intake (Entry ports only, non-polished finish) $100
Ports at entrance range from 1.55-1.6". Room for additional porting. I just cleaned up the entrances basically, nothing extravagant. Willing to port additional if requested, siamezing, etc.
Stock Intake with EGR Valve $50 (Can port for additional $50)
Stock Runners (NO DENTS) $50
Might have a Ported Plenum for $100
very rough porting that needs finishing. Willing to finish porting if interested
Last edited by smithtc; Jun 17, 2009 at 02:59 PM. Reason: pictures, additional comments on parts
Joined: Dec 2008
Posts: 2
Likes: 0
From: Fredericksburg, VA
Car: '69 Camaro
Transmission: TH200-4R
Axle/Gears: 12-bolt/3.73/Truetrac
Re: Intakes, Fuel Rail, AFPR, Injectors, Runners
If you still have the fuel rail, I'd give you $50 shipped to 22485.
Thread
Thread Starter
Forum
Replies
Last Post
