okay i have a 1992camaro 3.1L
I decided to start going for more speed I did the ported 3.4 swap I replaced the dizzy rotor and cap new plugs new wires fuel rail rebuilt new ignition coil new pushrods new starter.. I turn the key and the engine cranks but that's it no grumble no growl nothing at all just the motor spinning
I Need SOme HELP!
thanks

 

I always go right for the starting fluid to figure out what it is on no start.

If it tries to run, you know its a fuel problem.

If it won't even pop on SF, you know its a spark problem.

 

That's what I was gonna do when I get home lol

 

FYI I do not suggest using it for a band-aid on starting, only for testing purposes. Ive had the same can about 10 years, has a few squirts left

 

Inky time I ever really used it was in the winter she wasn't afan of the cold lol

 

If you "have" to use it, some auto stores but for sure a truck stop will have the better SF that has lube in it. As its harsh to use for constant starting, but some diesels need it, so they put top end lube in the better brands.