[OH] Set of 16 Dual Valve Springs (0 Miles)
Thread Starter
Joined: Oct 2003
Posts: 508
Likes: 9
From: Columbus, Ohio
Car: 1986 Iroc
Engine: Afr 408
Transmission: T56 Magnum
Axle/Gears: Moser 9" 3.70s
Set of 16 Dual Valve Springs (0 Miles)
Cleaning out my basement I found a full set of Dual Valve springs with retainers, keepers, and valve seals. See attached pictures.
These originally came on a set of AFR heads I purchased a while back. They are good for .550" lift. I never ran them. I switched to some high lift springs before putting the heads on the engine. So basically they are brand new. They have a standard 1.290" OD.
If you have any questions or need more pictures let me know.
$25
buyer pays shipping.
Thanks.
These originally came on a set of AFR heads I purchased a while back. They are good for .550" lift. I never ran them. I switched to some high lift springs before putting the heads on the engine. So basically they are brand new. They have a standard 1.290" OD.
If you have any questions or need more pictures let me know.
$25
buyer pays shipping.
Thanks.
Thread
Thread Starter
Forum
Replies
Last Post
1988iroc350tpi
Tech / General Engine
8
Aug 14, 2015 07:52 PM