Parting out 1992 Firebird

Thread Tools
 
Search this Thread
 
Old Jan 17, 2012 | 02:53 PM
  #1  
1992PFBird's Avatar
Thread Starter
Want a title? Post!
iTrader: (1)
 
Joined: Sep 2009
Posts: 0
Likes: 0
From: New Hampshire
Car: 1992 Pontiac Firebird
Engine: 3.1 V6
Parting out 1992 Firebird

Hey I'm parting out a 92 Firebird base model. I've never parted out a vehicle before but I feel like I can make more money doing this rather than scrapping it.
The interior is in good shape with a few stains on the upholstery but no rips whatsoever. The dash, gauges, shifter, and original t-tops are all in good shape. Has a brand new dynomax exhaust system installed by Lous custom exhaust.
The exterior is good, one dent on the roof and rear right quarter panel. The car runs great and was my daily driver. I rear ended someone so the front bumper cover is gone. Also needs a battery, new front tires and the floorboards are rotted out. Has been sitting for 3 months.
Attached are some pics. EVERYTHING is for sale except the audio system.
Let me know what you need and give me a reasonable offer. I'll figure out shipping..leave your zip.
I live in NH if your local, pickup is definitely easiest

Name:  ?action=view&current=bird4.jpg#!oZZ2QQcurrentZZhttp%3A%2F%2Fs188.photobucket.com%2Falbu.jpg
Views: 125
Size:  166.9 KB
Name:  ?action=view&current=bird4.jpg#!oZZ3QQcurrentZZhttp%3A%2F%2Fs188.photobucket.com%2Falbu.jpg
Views: 109
Size:  166.9 KB
Name:  ?action=view&current=bird4.jpg#!oZZ4QQcurrentZZhttp%3A%2F%2Fs188.photobucket.com%2Falbu.jpg
Views: 120
Size:  166.9 KB
Name:  ?action=view&current=bird4.jpg#!oZZ5QQcurrentZZhttp%3A%2F%2Fs188.photobucket.com%2Falbu.jpg
Views: 120
Size:  166.9 KB
Name:  ?action=view&current=bird4.jpg#!oZZ6QQcurrentZZhttp%3A%2F%2Fs188.photobucket.com%2Falbu.jpg
Views: 113
Size:  166.9 KB
Name:  ?action=view&current=bird4.jpg#!oZZ7QQcurrentZZhttp%3A%2F%2Fs188.photobucket.com%2Falbu.jpg
Views: 110
Size:  166.9 KB

If the pics don't show up here's the link to my photobucket
http://s188.photobucket.com/albums/z...rent=bird4.jpg

Last edited by 1992PFBird; Jan 18, 2012 at 07:59 PM.
Reply
Old Jan 17, 2012 | 07:29 PM
  #2  
antares57's Avatar
Senior Member
10 Year Member
iTrader: (8)
 
Joined: Aug 2011
Posts: 661
Likes: 7
From: Texas
Car: 91 Firebird/88 Firebird/91 Formula
Engine: V6 3.1/V8 5.0/V8 5.0
Transmission: 4L60/700R4/4L60
Axle/Gears: 3.23/2.73/2.73
Re: Parting out 1992 Firebird

What do you what for the items circled in red with shipping to 78415. I'm looking for the panel underneath the steering wheel but not the inner portion. Two cup holders if you have them, and the intake tube going to your plenum,and the fog lights?
Attached Thumbnails Parting out 1992 Firebird-2011-08-22_171149-1   Parting out 1992 Firebird-bird1-1-1-.jpg   Parting out 1992 Firebird-birdmotor-1-.jpg  

Last edited by antares57; Jan 17, 2012 at 07:30 PM. Reason: addition
Reply
Old Jan 17, 2012 | 07:33 PM
  #3  
karl's-92'-z28's Avatar
Supreme Member
iTrader: (5)
 
Joined: Jan 2008
Posts: 1,127
Likes: 1
From: Paradise, Hawaii
Car: Too many cars
Re: Parting out 1992 Firebird

Do you have the drivers side cup holder?
Reply
Old Jan 17, 2012 | 08:04 PM
  #4  
1992PFBird's Avatar
Thread Starter
Want a title? Post!
iTrader: (1)
 
Joined: Sep 2009
Posts: 0
Likes: 0
From: New Hampshire
Car: 1992 Pontiac Firebird
Engine: 3.1 V6
Re: Parting out 1992 Firebird

PM sent to Antares57.

Also on the car is 2 almost new rear tires mounted on original wheels.
Original rear spoiler in perfect shape.
Power mirrors
Reply
Old Jan 17, 2012 | 08:34 PM
  #5  
2QUIK6's Avatar
Member
 
Joined: Jan 2001
Posts: 436
Likes: 0
From: Ft. Worth, TX
Car: 89 Turbo Trans Am and lots of non-3rd gens
Engine: 231 SFI Turbo's, LT4, LT1
Transmission: 2004r, 4L60E
Re: Parting out 1992 Firebird

I need an OEM power antenna mast...motor does not need to work, just need the mast section of its not broke.
Reply
Old Jan 17, 2012 | 08:49 PM
  #6  
88TransAmGuy's Avatar
Senior Member
iTrader: (3)
 
Joined: May 2010
Posts: 976
Likes: 0
From: Northwest Indiana, Kouts
Car: 88' White-Black Trans Am
Engine: Trying to find a motor
Transmission: 4L60E
Axle/Gears: 3.23
Re: Parting out 1992 Firebird

Will you sell the radar detector? :P
Reply
Old Jan 17, 2012 | 09:05 PM
  #7  
1992PFBird's Avatar
Thread Starter
Want a title? Post!
iTrader: (1)
 
Joined: Sep 2009
Posts: 0
Likes: 0
From: New Hampshire
Car: 1992 Pontiac Firebird
Engine: 3.1 V6
Re: Parting out 1992 Firebird

It doesnt have a power antenna, sorry. And just get the radar detector at your local walmart lol. Its just a cheap cobra. You'd be losing money once I calculated shipping. Thanks!
Reply
Old Jan 18, 2012 | 09:06 AM
  #8  
FirebirdDude88's Avatar
Junior Member
iTrader: (3)
 
Joined: Oct 2010
Posts: 27
Likes: 0
From: Berkley, Ma
Car: 88 Firebird formula clone
Engine: Yeah its in there
Transmission: Thats in there too
Axle/Gears: Yeah there in the back
Re: Parting out 1992 Firebird

how much for just the muffler and 1 center cap shipped to 02779?.
Reply
Old Jan 18, 2012 | 01:08 PM
  #9  
1992PFBird's Avatar
Thread Starter
Want a title? Post!
iTrader: (1)
 
Joined: Sep 2009
Posts: 0
Likes: 0
From: New Hampshire
Car: 1992 Pontiac Firebird
Engine: 3.1 V6
Re: Parting out 1992 Firebird

For those posting with interest in the car. Please allow me a day or so to remove the part you need and get the prices laid out.
I'll start taking her apart tonight. Thank you!
Reply
Old Jan 18, 2012 | 05:31 PM
  #10  
ZTM87Firebird's Avatar
Junior Member
 
Joined: Dec 2011
Posts: 23
Likes: 0
Re: Parting out 1992 Firebird

How much for both door panels? including cupholders?
Reply
Old Jan 18, 2012 | 06:17 PM
  #11  
1992PFBird's Avatar
Thread Starter
Want a title? Post!
iTrader: (1)
 
Joined: Sep 2009
Posts: 0
Likes: 0
From: New Hampshire
Car: 1992 Pontiac Firebird
Engine: 3.1 V6
Re: Parting out 1992 Firebird

PM sent to FirebirdDude88 and ZTM87Firebird.
Car also has practically new water pump, only 5,000 miles on it.
Also for sale is the Subwoofer enclosure custom build for 82-92 firebirds or camaros.
Was built into the trunk by Audio Hazard. Fits (2) 12" subs. Carpeted with charcoal gray carpeting. Will post pics of it this weekend. Make an offer.
http://audiohazard.net/featured_installs
Reply
Old Jan 18, 2012 | 11:05 PM
  #12  
antares57's Avatar
Senior Member
10 Year Member
iTrader: (8)
 
Joined: Aug 2011
Posts: 661
Likes: 7
From: Texas
Car: 91 Firebird/88 Firebird/91 Formula
Engine: V6 3.1/V8 5.0/V8 5.0
Transmission: 4L60/700R4/4L60
Axle/Gears: 3.23/2.73/2.73
Re: Parting out 1992 Firebird

I may also be interested in the steering wheel, air dam, driver's lower door gfx, and front fender gfx on both sides if available.
Reply
Old Jan 19, 2012 | 02:30 PM
  #13  
1992PFBird's Avatar
Thread Starter
Want a title? Post!
iTrader: (1)
 
Joined: Sep 2009
Posts: 0
Likes: 0
From: New Hampshire
Car: 1992 Pontiac Firebird
Engine: 3.1 V6
Re: Parting out 1992 Firebird

Hey I've been really busy at work this week. Saturday morning ill be removing parts and getting prices. Thanks
Reply
Old Jan 20, 2012 | 02:26 AM
  #14  
Florida_mariner's Avatar
Junior Member
 
Joined: Nov 2009
Posts: 18
Likes: 0
Re: Parting out 1992 Firebird

waddaya take for the spoiler and it hardware to zip 32086


thanks
Reply
Old Jan 21, 2012 | 06:05 PM
  #15  
sw33tp34's Avatar
Junior Member
 
Joined: Aug 2010
Posts: 39
Likes: 0
From: Alabama
Car: 1992 Firebird
Engine: 3.1
Transmission: 700r4
Axle/Gears: 3.23
Re: Parting out 1992 Firebird

Pm a price for a driver door? Someone smashed mine in the parking lot today and I immediately came here looking for a new one. Shipping to 35633
Reply
Old Jan 21, 2012 | 06:12 PM
  #16  
1992PFBird's Avatar
Thread Starter
Want a title? Post!
iTrader: (1)
 
Joined: Sep 2009
Posts: 0
Likes: 0
From: New Hampshire
Car: 1992 Pontiac Firebird
Engine: 3.1 V6
Re: Parting out 1992 Firebird

I'll have to work out a price and it'll take me a few days to remove it. The mirror on the drivers side door is bent back out of place so i'll have to remove it before i ship it. Also expect high shipping costs due to the weight of the door. We've had snow storms 3 days in a row now so it's been really hard to get all the parts i need removed. Thanks!
Parts i've removed so far!
www.photobucket.com/firebirdparts

Last edited by 1992PFBird; Jan 21, 2012 at 06:36 PM.
Reply
Old Jan 21, 2012 | 08:51 PM
  #17  
karl's-92'-z28's Avatar
Supreme Member
iTrader: (5)
 
Joined: Jan 2008
Posts: 1,127
Likes: 1
From: Paradise, Hawaii
Car: Too many cars
Re: Parting out 1992 Firebird

Ill take those center caps, how much to 96701? Also do you have a drivers side cup holder?
Reply
Old Jan 23, 2012 | 01:37 PM
  #18  
1992PFBird's Avatar
Thread Starter
Want a title? Post!
iTrader: (1)
 
Joined: Sep 2009
Posts: 0
Likes: 0
From: New Hampshire
Car: 1992 Pontiac Firebird
Engine: 3.1 V6
Re: Parting out 1992 Firebird

I saw you payed for another set from that guy overseas? Still want this set of 3?
Removed almost all of the trim panels today along with the rear seats and the sub box.
www.photobucket.com/firebirdparts
The glue you see on the foot trim panel underneath the dash on the pass side has been removed since the pic was taken.
Reply
Old Jan 24, 2012 | 09:38 AM
  #19  
72vega's Avatar
Member
20 Year Member
iTrader: (9)
 
Joined: Mar 2002
Posts: 255
Likes: 0
From: Erie PA
Car: 2008 Silverado, 73 LeMans, 1987 GTA
Engine: 4.8, 350 Pontiac, 350 LT1
Transmission: 4L65E, TH350, T56
Axle/Gears: 3.42, 2.73, 3.42
Re: Parting out 1992 Firebird

are the mounting plates that run the length of the rocker and mount the rocker gfx still in good condition? if so ill take em. shipping to 16508?
Reply
Old Jan 24, 2012 | 05:49 PM
  #20  
1992PFBird's Avatar
Thread Starter
Want a title? Post!
iTrader: (1)
 
Joined: Sep 2009
Posts: 0
Likes: 0
From: New Hampshire
Car: 1992 Pontiac Firebird
Engine: 3.1 V6
Re: Parting out 1992 Firebird

Still haven't gotten to removing the GFX. Isn't the rocker GFX just one piece? not sure which mounting plates your referring to..

Going to wait another few days until I have all the parts i'm willing to sell removed so I can make one trip to FedEx to get shipping prices. Have no license at the moment so it's hard to get rides. Thank you for your patience. Any parts that people have requested are being held, first come first serve.

UPDATE!! NEW PARTS REMOVED!!
www.photobucket.com/firebirdparts

Last edited by 1992PFBird; Jan 24, 2012 at 05:55 PM.
Reply
Old Jan 25, 2012 | 03:00 AM
  #21  
customblackbird's Avatar
Supreme Member
15 Year Member
Liked
Loved
Community Favorite
iTrader: (15)
 
Joined: Feb 2007
Posts: 4,770
Likes: 64
From: Trumbull CT
Car: 87 TA clone
Engine: 70/70 Turbo 5.3 LS
Transmission: bullet proof 2004R
Axle/Gears: ford 8.8, 3.55 gears
Re: Parting out 1992 Firebird

Doors? 07052 NJ
Reply
Old Jan 25, 2012 | 07:54 AM
  #22  
1992PFBird's Avatar
Thread Starter
Want a title? Post!
iTrader: (1)
 
Joined: Sep 2009
Posts: 0
Likes: 0
From: New Hampshire
Car: 1992 Pontiac Firebird
Engine: 3.1 V6
Re: Parting out 1992 Firebird

Drivers side door is in very rough shape, as is the mirror. passenger door/mirror is in good shape. Let me know if you want it
Reply
Old Jan 29, 2012 | 01:10 AM
  #23  
karl's-92'-z28's Avatar
Supreme Member
iTrader: (5)
 
Joined: Jan 2008
Posts: 1,127
Likes: 1
From: Paradise, Hawaii
Car: Too many cars
Re: Parting out 1992 Firebird

Im still intetested in the center caps, are they tall or short?
Reply
Old Jan 29, 2012 | 01:14 AM
  #24  
karl's-92'-z28's Avatar
Supreme Member
iTrader: (5)
 
Joined: Jan 2008
Posts: 1,127
Likes: 1
From: Paradise, Hawaii
Car: Too many cars
Re: Parting out 1992 Firebird

Ill take the head light motors also...
Reply
Old Jan 29, 2012 | 07:12 PM
  #25  
Slow88lb9's Avatar
Member
iTrader: (3)
 
Joined: Nov 2001
Posts: 141
Likes: 0
From: Jamestown NY USA
Car: 88 Iroc 91 Z28
Engine: 5.0 LB9
Transmission: WC T5 / 700R4
Axle/Gears: 10 bolt 3.73
Re: Parting out 1992 Firebird

would you cut out part of the door piller for me from the lower hinge down and about 4 inches of rocker ?
Reply
Old Jan 29, 2012 | 08:24 PM
  #26  
bakerstreet's Avatar
Junior Member
 
Joined: Nov 2002
Posts: 76
Likes: 0
Re: Parting out 1992 Firebird

Is the a/c compressor any good?

What about the hatch motor?
Reply
Old Jan 29, 2012 | 08:59 PM
  #27  
DarrensCamaro's Avatar
Member
15 Year Member
iTrader: (6)
 
Joined: Sep 2008
Posts: 447
Likes: 1
From: Warren MI
Car: 1992 Camaro RS
Engine: 350 Carb'd
Transmission: 5 Speed
Axle/Gears: 3.73
Re: Parting out 1992 Firebird

Upper radiator support, shipped to 48091?
Reply
Old Jan 31, 2012 | 07:18 AM
  #28  
1992PFBird's Avatar
Thread Starter
Want a title? Post!
iTrader: (1)
 
Joined: Sep 2009
Posts: 0
Likes: 0
From: New Hampshire
Car: 1992 Pontiac Firebird
Engine: 3.1 V6
Re: Parting out 1992 Firebird

The centercaps are OEM. Fit on all 82-92 birds. The headlight motors are in good working condition I just have to remove them. The AC compressor is removed and junk. The hatch motor is in good working condition I just need to remove it. The upper radiator support is also in good condition and I need to remove it.

Bakerstreet I need a zip code from you to get a shipping price on the hatch motor

I'm going to FedEx today to get shipping prices on all the the parts that have been removed and requested. Please expect a PM today or tomorrow with final prices. Thank You!

UPDATE!!!
MORE PARTS REMOVED
www.photobucket.com/firebirdparts

Last edited by 1992PFBird; Jan 31, 2012 at 04:00 PM.
Reply
Old Jan 31, 2012 | 10:37 PM
  #29  
bakerstreet's Avatar
Junior Member
 
Joined: Nov 2002
Posts: 76
Likes: 0
Re: Parting out 1992 Firebird

how much for hatch pull down motor to 75231
Reply
Old Feb 2, 2012 | 05:14 PM
  #30  
1992PFBird's Avatar
Thread Starter
Want a title? Post!
iTrader: (1)
 
Joined: Sep 2009
Posts: 0
Likes: 0
From: New Hampshire
Car: 1992 Pontiac Firebird
Engine: 3.1 V6
Re: Parting out 1992 Firebird

Have it removed just need to get down to USPS to get a price for you. You'll have a price tomorrow around 3pm EST
Reply
Old Feb 2, 2012 | 05:34 PM
  #31  
DarrensCamaro's Avatar
Member
15 Year Member
iTrader: (6)
 
Joined: Sep 2008
Posts: 447
Likes: 1
From: Warren MI
Car: 1992 Camaro RS
Engine: 350 Carb'd
Transmission: 5 Speed
Axle/Gears: 3.73
Re: Parting out 1992 Firebird

snap me a picture if you can as well, it appears to be the same as mine with the radiator hose support on the right side and set up for a single fan?

would also need a shipped price, thanks!
Reply
Old Feb 2, 2012 | 06:16 PM
  #32  
1992PFBird's Avatar
Thread Starter
Want a title? Post!
iTrader: (1)
 
Joined: Sep 2009
Posts: 0
Likes: 0
From: New Hampshire
Car: 1992 Pontiac Firebird
Engine: 3.1 V6
Re: Parting out 1992 Firebird

Yeah no problem man. Radiator hose on the right side if you looking into the hood from the front. And a single fan setup.
There's a picture of it here
www.photobucket.com/firebirdparts

I'll take a picture of the setup and another good picture of the support tmrw. I'll also have that shipping price to you around 3pm EST tomorrow. Thanks!
Reply
Old Feb 2, 2012 | 11:21 PM
  #33  
karl's-92'-z28's Avatar
Supreme Member
iTrader: (5)
 
Joined: Jan 2008
Posts: 1,127
Likes: 1
From: Paradise, Hawaii
Car: Too many cars
Re: Parting out 1992 Firebird

Ok ill take the center caps & CAI, how much to 96701?
Reply
Old Feb 3, 2012 | 07:21 AM
  #34  
1992PFBird's Avatar
Thread Starter
Want a title? Post!
iTrader: (1)
 
Joined: Sep 2009
Posts: 0
Likes: 0
From: New Hampshire
Car: 1992 Pontiac Firebird
Engine: 3.1 V6
Re: Parting out 1992 Firebird

I have you down for wanting the center caps and the headlight motors?
I could have a shipping price today to your zip if you'd like.

The CAI is SOLD
Reply
Old Feb 7, 2012 | 08:23 PM
  #35  
DarrensCamaro's Avatar
Member
15 Year Member
iTrader: (6)
 
Joined: Sep 2008
Posts: 447
Likes: 1
From: Warren MI
Car: 1992 Camaro RS
Engine: 350 Carb'd
Transmission: 5 Speed
Axle/Gears: 3.73
Re: Parting out 1992 Firebird

Interested still in the upper radiator support... Price shipped to 48091??
Reply
Old Feb 11, 2012 | 08:34 PM
  #36  
antares57's Avatar
Senior Member
10 Year Member
iTrader: (8)
 
Joined: Aug 2011
Posts: 661
Likes: 7
From: Texas
Car: 91 Firebird/88 Firebird/91 Formula
Engine: V6 3.1/V8 5.0/V8 5.0
Transmission: 4L60/700R4/4L60
Axle/Gears: 3.23/2.73/2.73
Re: Parting out 1992 Firebird

pm sent - payment sent, address provided.
Reply
Old Feb 11, 2012 | 09:16 PM
  #37  
lawdog49's Avatar
Junior Member
iTrader: (6)
 
Joined: May 2008
Posts: 75
Likes: 0
From: Birmingham, AL
Car: 91 Z28
Engine: 305 TPI
Transmission: 700r4
Axle/Gears: 3.42
Re: Parting out 1992 Firebird

interested in complete door panels with armrests and cup holders shipped to 35244. send me a pm with more pics of each panel please.
Reply
Old Feb 11, 2012 | 11:24 PM
  #38  
1992PFBird's Avatar
Thread Starter
Want a title? Post!
iTrader: (1)
 
Joined: Sep 2009
Posts: 0
Likes: 0
From: New Hampshire
Car: 1992 Pontiac Firebird
Engine: 3.1 V6
Re: Parting out 1992 Firebird

Tracking number sent to Antares.
Following items are sold:
-Panel under steering wheel
-Cup holders (both)
-Fog lights + assembly (both)
-Center console light switch
-Intake + Air filter
Reply
Old Feb 12, 2012 | 03:23 AM
  #39  
karl's-92'-z28's Avatar
Supreme Member
iTrader: (5)
 
Joined: Jan 2008
Posts: 1,127
Likes: 1
From: Paradise, Hawaii
Car: Too many cars
Re: Parting out 1992 Firebird

Shipping on the caps to 96701?
Reply
Old Feb 12, 2012 | 09:31 AM
  #40  
Adrenaline1's Avatar
Member
iTrader: (1)
 
Joined: Nov 2011
Posts: 402
Likes: 0
From: Holland, MI
Car: 1982 Firebird
Engine: 2.8 N/A
Transmission: Manual 4 Speed
Re: Parting out 1992 Firebird

How much for the custom enclosure? What size speakers is it cut for? Thanks
Reply
Old Feb 13, 2012 | 10:26 AM
  #41  
plstu's Avatar
Junior Member
 
Joined: Jun 2011
Posts: 36
Likes: 0
Re: Parting out 1992 Firebird

I can't open the original pics you posted but am interested in the passengers REAR body effects panel if it is in good shape. Condition and price to 89131? Thanks
Reply
Old Feb 14, 2012 | 08:13 PM
  #42  
Mudluver27's Avatar
Junior Member
iTrader: (1)
 
Joined: Jan 2012
Posts: 45
Likes: 0
From: Tennessee
Car: 1988 Firebird
Engine: LT1
Transmission: 6-speed
Axle/Gears: 2001 ss 10 bolt 342's
Re: Parting out 1992 Firebird

automatic or manual? I need a manual center console. Complete with the box and bezel for the hvac/radio.
Reply
Old Feb 14, 2012 | 09:58 PM
  #43  
biglano's Avatar
Junior Member
 
Joined: Dec 2010
Posts: 19
Likes: 0
From: north carolina
Car: 89 formula
Engine: 350
Transmission: 5 speed
Re: Parting out 1992 Firebird

how much for the dash pad to 28079? and inner window sweeps if in good condition?
Reply
Old Feb 14, 2012 | 11:50 PM
  #44  
FullSendRacing's Avatar
Member
 
Joined: Aug 2001
Posts: 294
Likes: 2
From: SoCal
Car: '85 Trans Am FAILBIRD
Engine: 350
Transmission: T56
Axle/Gears: 4th gen torsen 3.42
Re: Parting out 1992 Firebird

Where you located in NH? I might be interested in the hood and rear bumper
Reply
Old Feb 15, 2012 | 05:16 AM
  #45  
1992PFBird's Avatar
Thread Starter
Want a title? Post!
iTrader: (1)
 
Joined: Sep 2009
Posts: 0
Likes: 0
From: New Hampshire
Car: 1992 Pontiac Firebird
Engine: 3.1 V6
Re: Parting out 1992 Firebird

Xavier - I'm in Concord NH. It's central. About an hour and a half from Boston. I don't have a truck so I wouldn't be able to meet halfway.

BigLano I will go to USPS as soon as possible to get a shipping price on the dash pad. The door panels and window sweeps are in unsellable condition.

Mudluver27 It's an automatic. (terrible i know). Sorry!

Karlsz28 - I'll get you a shipping price on those caps ASAP! I apoligize for the delay.

Adrenaline - I'll get a shipping price on the custom box. It is pretty heavy so it may need to be freighted. It's cut for 12" subs. I'll need a zip code from you before we can go forward.

PLSTU - try this link... http://s188.photobucket.com/albums/z...ebird%20Parts/

and this link...

www.photobucket.com/firebirdparts

Again to everyone waiting for these parts. It's a first come first serve basis and I'll be updating the items sold as soon as I can. Work has been crazy and I'm trying to get all this out as fast as I can. Thanks
Reply
Old Feb 15, 2012 | 07:04 PM
  #46  
AJHECK95's Avatar
Junior Member
 
Joined: Dec 2011
Posts: 44
Likes: 0
From: sioux city iowa
Car: 1989 formula
Engine: stock lo3 305
Transmission: 700r4
Axle/Gears: dont know
Re: Parting out 1992 Firebird

how much for gauges shipped to 51108
Reply
Old Feb 15, 2012 | 08:10 PM
  #47  
Adrenaline1's Avatar
Member
iTrader: (1)
 
Joined: Nov 2011
Posts: 402
Likes: 0
From: Holland, MI
Car: 1982 Firebird
Engine: 2.8 N/A
Transmission: Manual 4 Speed
Re: Parting out 1992 Firebird

My zip is 48393. Thanks!
Reply
Old Feb 16, 2012 | 10:17 PM
  #48  
1992PFBird's Avatar
Thread Starter
Want a title? Post!
iTrader: (1)
 
Joined: Sep 2009
Posts: 0
Likes: 0
From: New Hampshire
Car: 1992 Pontiac Firebird
Engine: 3.1 V6
Re: Parting out 1992 Firebird

PM's sent to:
rrf321
biglano
AJHECK95
Karl's-92'-z28
DarrensCamaro
Bakerstreet
Gaznick

All with shipping prices!

Adrenaline I didn't get your zip until after I left to USPS. I'll get your shipping price tmrw.
Thanks everyone!
Reply
Old Feb 18, 2012 | 02:03 AM
  #49  
blacksunshine'91's Avatar
Supreme Member
25 Year Member
iTrader: (10)
 
Joined: Sep 2000
Posts: 2,508
Likes: 197
From: Moorpark, CA
Car: '91 GTA, '92 T/A Convertible
Engine: GTA: 350 w/Vortec heads, T/A: 305
Transmission: Pro-built 700R4
Axle/Gears: GTA: 3.27, T/A: 2.73
Re: Parting out 1992 Firebird

Do you still have the GFX that attach to the passenger's side door?
Reply
Old Feb 18, 2012 | 12:15 PM
  #50  
1992PFBird's Avatar
Thread Starter
Want a title? Post!
iTrader: (1)
 
Joined: Sep 2009
Posts: 0
Likes: 0
From: New Hampshire
Car: 1992 Pontiac Firebird
Engine: 3.1 V6
Re: Parting out 1992 Firebird

I do, but it's really badly cracked and in poor shape. I'm sorry.

UPDATE OF PARTS SOLD:
--Panel under steering wheel
-Cup holders (both)
-Fog lights + assembly (both)
-Center console light switch
-Intake + Air filter
-Dash pad
-Radiator support
-Hatch motor trim
-DS Sun Visor
-Accessory switches (trunk, fog, defrost)

ALL PARTS YOU SEE IN PICS (OR DONT SEE) ARE FOR SALE!!!
www.photobucket.com/firebirdparts
Reply



All times are GMT -5. The time now is 05:52 AM.