Picked up a parts car to finish my existing project - pretty complete but the body's pretty rough. Motor and tranny are gone and I'm taking what I need but if you need something shout out.

Has a decent rear window louver set and the t-top glass is cherry but I noticed a very small piece of the trim around the glass is missing. Also came with a B&M Megashifter. (sold)

I bought the car from a guy who didn't want to scrap it because of all the useable parts so I want to pay that forward before I pick it and then scrap it.

 

The louvers are cool but a couple are just barely not straight, it would be super easy to fix and they should be refinished. Looks like they might split in 3 pieces and ship fairly easy. The center is hinged and has levers that lock and unlock it so you can clean the glass under. Come with all mounting hardware.

 

Deleted

 

Good question I'll have to check under the hood tomorrow morning - motor and trans were already pulled - I kind of only glanced under there as I'm not interested in anything under the hood since mines already finished. I saw the booster, master cyl., A/C evap...

Yep A/C car

Anything specific your after?

 

Deleted

 

Some pics of the T-tops - the bag is there but it's kind of ratty thought but I just glanced at it, maybe it'll clean up. Make an offer.

 

off topic question, but do you have a fish eye lense on the t-top pics? if not i think im going insane XD

 

Come back to us man! Lol, yeah I was taking pics with my gopro which has a fish eye lens.

 

ok thanks XD now back to your normal scheduled thread

 

Factory or C & C t-tops?

Where are you located?

 

Factory pieces and the bag is embossed with the GM logo. The handles and inside trim are nice, the glass is nice and the large flat weatherstrip that sticks out above the door is whole though it's a little sun faded and could use some armoral. I mean they aren't show car pieces or nothing but they're real decent.

I'm in Montana and it's raining and supposed to for a week so maybe the t-tops will have to wait until I can get the other stuff out of the car first.

 

Louvers are off so here's some pics of those. All mounting hardware included. you can see the paint on the top middle louver is fading off. Respray these and they'd be real nice.

 

Some underside pics. These are light and should be pretty inexpensive to ship out.

 

Louvers are packed up in two boxes and ready to ship out. You can get a quote if you want shipping from 59801, box #1 40x45x6 17lbs, box #2 is 45x14x6 2 lbs.

 

i need the t-top bar. some more pics. condition?

shipped 06770

 

I can see rust on it so I'd say not very good shape. Won't know for sure what's up until I get it pulled.

 

7thdarkangel. I have a good Ttop bar? You interested?

Sorry coolball for coming into your thread like that ha.

 

Now you have to buy something no worries.

I think since I'm in the middle of body work on mine I might pull the bar and refinish it too so I might ask a little more for it.

 

Yo Coolball, What up? Hey what kind of condition is the MegaShifter in? Does it go through the gears smooth? Easy to pull the release? Any rips on the boot? Rust under the boot? Come with the short cable?

 

Shifter is sold!

 

Got some additional parts pulled this weekend.

Complete main harness - no broken connectors
Windshield wiper motor
Cowl screen in good shape
Have some nice dash vents - all except one big one that is broke
All ducting
A/C evaporator cover
Blower motor and housing with all vacuum cans and the firewall vent


Let me know what parts you might need before it goes to scrap!

Might have a nice passenger tail light, cover looks good will know more when I pull it. Also might be able to salvage the dark grey carpet there's no rips but there's some rust spots around the seat bolts..might clean up okay.

Stay tuned!

 

how much for louvers shipped to 78408?

 

I'm asking for $225 shipped - there's two boxes and one is large so UPS wants to whack me for it even though it only weighs 17lbs

 

How's the dash pad?...where r u located?...

 

Keeping and using the dash pad as it's mint - sorry man

 

Bump - - lots of good parts, mostly mechanical ones at this point, most of the cosmetic stuff is gone.

 

What is the condition of the lower quarter panels? I REAALLY need the circled section if its not rusted, and if you are willing to cut it out for me. I would need it cut with the wheel well curve intact.

 

See what I can do for you. I'm using the trim pieces but they haven't been pulled yet so I don't know what it looks like underneath. No problem cutting it out if it's good enough. Let you know. Funny enough on my car it was cancerous in the exact same spot on yours. I just finished braze welding the repairs last weekend. Clean looking car you've got there.

 

Car has been scrapped but I still have the louvers and also the t-tops. Make me an offer on either. The louvers are like $150 to ship, not sure about the t-tops though.

 

How much for the louvers shipped USPS to Canada, postal code A1L 1K1?

 

I'm not even sure how to ship to Cananda bro....isn't there customs and all that stuff?

 

No big issues...just get a quote from USPS and fill out a form stating what you are shipping and how much it is worth. I will pay the duties upon delivery.

 

Okay - I want these louvers out of my shop! - you pay shipping and kick me $20 and you can have em. Too much stuff in the place need to get it cleared to move inside for the winter.

 

need headlight panel that headlight attach to that supports the bumper.
also need a good center console lid.

 

All I have left are the louvers and the T-tops from this car.

Try A1 Autoparts, I just checked and Rock Auto has them new for $25

 

Please tell me shipping to zip 36801...would take a chance on them at that price. You have a PayPal?

Thx,
War

 

Sold the lovers and tops locally this weekend. Thanks for the interest.

 

fog grill?

 

Looking for a radiator filler panel, the part that covers the hole between the radiator and front bumper around the hood latch area.