Sub Box Question
#1
Junior Member
Thread Starter
Join Date: Aug 2013
Location: Zachary Louisiana
Posts: 30
Likes: 0
Received 0 Likes
on
0 Posts
Engine: 355
Transmission: 350
Axle/Gears: 342
Sub Box Question
Has anyone found a standard per-made box for a single 10 that will fit in the deep well, in the center of the rear of a third gen - next to the latch. I have a cvx kicker 10. Something like this.
Does port direction matte?
Last edited by jayonemo; 12-16-2016 at 10:28 PM. Reason: add text
#2
Supreme Member
iTrader: (58)
Re: Sub Box Question
You'd have to have something fairly small. I had a pair of Kicker Solo 8's in the bottom of the well of my Firebird. The non-custom rectangular box was a tight fit. I had maybe a few inches unused at one end. Even without the amp rack, the well gets tight between the hatch pulldown and the package shelf. It's really only just big enough to stow a flat tire. If you can build a square box to fill the entire bottom of the well, you might have enough volume.
#3
Junior Member
iTrader: (2)
Join Date: Nov 2000
Location: Virginia Beach, VA
Posts: 99
Likes: 0
Received 0 Likes
on
0 Posts
Transmission: 700R4
Axle/Gears: 2.73
Re: Sub Box Question
im about to try these, the first link should fit no problem, the last 2 might be tight
http://www.mobilesoundworks.com/prod...box-single.htm
https://www.carid.com/qpower/10-down...allow10df.html
http://www.mobilesoundworks.com/prod...box-single.htm
https://www.carid.com/qpower/10-down...allow10df.html