can't burn '512 chip in tuner pro rt
#1
Member
Thread Starter
Join Date: Apr 2012
Location: Walla Walla,WA
Posts: 226
Likes: 0
Received 3 Likes
on
3 Posts
Car: 91 Firebird, 87 E'LS' Camino
Engine: 5.7 TPI, 5.3
Transmission: 700R4,200R4
Axle/Gears: 4.10 Lock Right locker/2.43
can't burn '512 chip in tuner pro rt
okay so I got my car dyno tuned the other and it runs fantastic but I can't get the chip to burn correctly I am using the correct hex stuff but when I throw the chip in the ecu it "runs" off stock tune (limp mode). I am using the moates apu1 with tuner pro RT, I have verified the chips are blank and even verify that it matches the buffer after it is burnt. the chip in the burner is away from the handle with the notch facing the handle and when I put in the ecu the notch faces toward the ZIF handle. am I over looking something? I burnt chips before and they have worked. I gave up and just left my computer hooked up emulating to get it home.
#2
Member
Thread Starter
Join Date: Apr 2012
Location: Walla Walla,WA
Posts: 226
Likes: 0
Received 3 Likes
on
3 Posts
Car: 91 Firebird, 87 E'LS' Camino
Engine: 5.7 TPI, 5.3
Transmission: 700R4,200R4
Axle/Gears: 4.10 Lock Right locker/2.43
Re: can't burn '512 chip in tuner pro rt
okay so when I load the file to buffer and click edit it shows nothing but 0's for the whole table. Is it that I am not uploading the file to the buffer correctly?
#3
Member
Thread Starter
Join Date: Apr 2012
Location: Walla Walla,WA
Posts: 226
Likes: 0
Received 3 Likes
on
3 Posts
Car: 91 Firebird, 87 E'LS' Camino
Engine: 5.7 TPI, 5.3
Transmission: 700R4,200R4
Axle/Gears: 4.10 Lock Right locker/2.43
Re: can't burn '512 chip in tuner pro rt
okay I am stupid looks like I had to files saved with today's date one was blank and one saved in the wrong folder (auto save folder) was what I need
#4
Supreme Member
Re: can't burn '512 chip in tuner pro rt
okay so I got my car dyno tuned the other and it runs fantastic but I can't get the chip to burn correctly I am using the correct hex stuff but when I throw the chip in the ecu it "runs" off stock tune (limp mode). I am using the moates apu1 with tuner pro RT, I have verified the chips are blank and even verify that it matches the buffer after it is burnt. the chip in the burner is away from the handle with the notch facing the handle and when I put in the ecu the notch faces toward the ZIF handle. am I over looking something? I burnt chips before and they have worked. I gave up and just left my computer hooked up emulating to get it home.
Thread
Thread Starter
Forum
Replies
Last Post
theformula
Aftermarket Product Review
5
11-15-2000 05:17 PM