Drivers seat track
#1
Drivers seat track
Does anybody know a place I could find a manual drivers side seat track? I can't post in the classifieds section because I just signed up for the board again.
(I used to be on this board, but can't log into my old account )
If you have one, by all means, feel free to PM me
(I used to be on this board, but can't log into my old account )
If you have one, by all means, feel free to PM me
#2
Member
Join Date: Feb 2009
Location: Commerce Twp, MI
Posts: 185
Likes: 0
Received 0 Likes
on
0 Posts
Car: '91 Camaro
Engine: LSx
Transmission: 4l60e
Axle/Gears: posi
Re: Drivers seat track
3rd or 4th gen tracks will work with out an issue, just food for thought, I used a 4th gen track, bolted up.
#3
Re: Drivers seat track
I was able to source a seat track. I wanted the third gen track because they are light and they are easier to adapt to a custom install. This may seem like sacrilege, but I'm putting grey fourth gen cloth buckets into a '92 notchback. (I wouldn't have done this, but the car had Hyundai Tiburon seats when I bought it and I wanted something cheap and lightweight and relatively stock appearing)
Fourth gen bucket seats with third gen manual track is about as light as you're going to get unless you put a racing seat in. The pair of seats was 37 pounds lighter than the 2 Hyundai seats that were in the car. I did the same thing in my TTA. I HATED the stock seats in my Trans Am.
Fourth gen bucket seats with third gen manual track is about as light as you're going to get unless you put a racing seat in. The pair of seats was 37 pounds lighter than the 2 Hyundai seats that were in the car. I did the same thing in my TTA. I HATED the stock seats in my Trans Am.
Last edited by Hasty_TTA; 08-07-2015 at 02:22 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Mister_Johnny99
Interior Parts Wanted
0
08-14-2015 12:59 PM