GTA rim gold paint code was correct.
#1
Senior Member
Thread Starter
iTrader: (2)
Join Date: Oct 1999
Location: Hattiesburg, MS, USA
Posts: 893
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1992 Jade Green---Trans Am Converti
Engine: LS1
Transmission: T56
GTA rim gold paint code was correct.
17" GTA centers came out a perfect match. Still need to polish the other three rings, put the 100 bolts back in, and get my custom centercap emblems in. And then I can wait for the car to get finished...
I thought I had the paint code around here.. I'll get it and reply back.. It's expensive, $96 for the quart needed.
Came out quite nice for being red before.
Kevin D.
I thought I had the paint code around here.. I'll get it and reply back.. It's expensive, $96 for the quart needed.
Came out quite nice for being red before.
Kevin D.
#2
TGO Supporter
Join Date: Nov 2000
Location: Houston, TX
Posts: 2,201
Likes: 0
Received 0 Likes
on
0 Posts
Car: '86 T/A
Engine: 350/LT1 Intake
Transmission: 700R4 - Built
Axle/Gears: 4th gen 3.42
Wow.. that paint was expensive. Thats basically my dealers cost for the paint on my car per quart.
#5
Senior Member
Thread Starter
iTrader: (2)
Join Date: Oct 1999
Location: Hattiesburg, MS, USA
Posts: 893
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1992 Jade Green---Trans Am Converti
Engine: LS1
Transmission: T56
I'll get the paint code I used tomorrow. It's definitely a wheel only color.
These did come off a vette. They're epsilon 17"x9.5" in the corvette offset. Best I can find is they were made late 80's early 90's and are the closest thing in design to the GTA's that I've found.
They 'bullet hole' markings are where the 20 bolts go to hold the three pieces of rim together. They're gloss black with clear.
Kevin D.
These did come off a vette. They're epsilon 17"x9.5" in the corvette offset. Best I can find is they were made late 80's early 90's and are the closest thing in design to the GTA's that I've found.
They 'bullet hole' markings are where the 20 bolts go to hold the three pieces of rim together. They're gloss black with clear.
Kevin D.
Trending Topics
#9
Supreme Member
Join Date: Jan 2003
Location: West Des Moines, IA
Posts: 1,304
Likes: 0
Received 0 Likes
on
0 Posts
Car: 2008.5 Mazdaspeed 3 GT
Engine: 2.3 DISI Turbo
Transmission: 6 speed MT
If I ever find a set I'm going to buy them. Always wanted them to be 17's instead of 16's. Plus having the fatter tires available in the 17" sizes...
#12
Senior Member
Thread Starter
iTrader: (2)
Join Date: Oct 1999
Location: Hattiesburg, MS, USA
Posts: 893
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1992 Jade Green---Trans Am Converti
Engine: LS1
Transmission: T56
Finished rims mounted. Gotta hit them again with more Mother's to take care of the greasy hands at the tire shop.
Still haven't seen the guy to get the paint code. Car's getting close to coming home too!
Still haven't seen the guy to get the paint code. Car's getting close to coming home too!
#17
Member
Join Date: Jul 2004
Location: Eastside
Posts: 218
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1985 Buick Regal T
Engine: 87 3.8 turbo/lc2 drive train
Transmission: 200r4brf
17" gtas
hey Iv'e been searching on the internet but I can't seem to find any info on these rims they sure are purtey...I would love to have them on my regal!
#18
Senior Member
Thread Starter
iTrader: (2)
Join Date: Oct 1999
Location: Hattiesburg, MS, USA
Posts: 893
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1992 Jade Green---Trans Am Converti
Engine: LS1
Transmission: T56
There's a set on the classifieds right now. 17x8.5 and 17x9.5. Guy wants $1000 bucks for them which really isn't a bad deal considering how much they probably cost new.
All I know is the are made by Epsilon or are called Epsilon by an unknown company. Made in Japan, and were a popular add on to C4 vettes in the late 80's or early 90's, usually matched to the color of the car.
Good luck,
Kevin D.
All I know is the are made by Epsilon or are called Epsilon by an unknown company. Made in Japan, and were a popular add on to C4 vettes in the late 80's or early 90's, usually matched to the color of the car.
Good luck,
Kevin D.
#20
Senior Member
Thread Starter
iTrader: (2)
Join Date: Oct 1999
Location: Hattiesburg, MS, USA
Posts: 893
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1992 Jade Green---Trans Am Converti
Engine: LS1
Transmission: T56
Originally posted by Graboid
that will be the best looking pontiac convertible on this board
that will be the best looking pontiac convertible on this board
Paint got pushed back to tomorrow or Thursday, but it's coming together. Completely stripped down and built back up. I swear he primed and blocked at least 8 times.. Thenose went back together today and it's finally starting to look like a car again..
Kevin D.
#21
Member
Join Date: Jul 2004
Location: Eastside
Posts: 218
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1985 Buick Regal T
Engine: 87 3.8 turbo/lc2 drive train
Transmission: 200r4brf
hhhmmm then I think I already have a set of 16'' do I really need to spend the extra $$ on 17's?
#22
Supreme Member
Join Date: Jan 2005
Location: Amsterdam , NY
Posts: 1,699
Likes: 0
Received 3 Likes
on
3 Posts
Car: 1985 Trans Am
Engine: vee eight
Transmission: auto
Axle/Gears: 4.10 gears
what the hell happened to your car, i saw the pics, i didnt know you had an accident , and what color is the car gonna be and how did blood get on the headrest like that ?and was everyone ok. the rims looks good btw now that i see them all done .
#23
Senior Member
Thread Starter
iTrader: (2)
Join Date: Oct 1999
Location: Hattiesburg, MS, USA
Posts: 893
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1992 Jade Green---Trans Am Converti
Engine: LS1
Transmission: T56
Yup, seems you have to turn at EVERY corner.. I ran into a bunch of trees but almost made it to the 8th green!
Got a complete GM front end, a RA1 hood, a used door GFX piece, and he was able to save everything else. Had it COMPLETELY stripped down to metal, got everything perfect and then started building it back up.
It's going back to the stock jade green color, rare and looks good. RA vents are the gold rim color, door handles/locks are black, and no door molding (maybe later).
As far as the blood, it appears that a 6'5" passenger will scalp himself on the convertible top latch in a wreck. Even though I'm getting new covers, the blood just wiped right up when it dried.
Good news is I'm picking her up tonight! I'll post some teaser pics tonight, but since I'm having to put everything but the nose back on the completed pics will have to wait.
Kevin D.
Got a complete GM front end, a RA1 hood, a used door GFX piece, and he was able to save everything else. Had it COMPLETELY stripped down to metal, got everything perfect and then started building it back up.
It's going back to the stock jade green color, rare and looks good. RA vents are the gold rim color, door handles/locks are black, and no door molding (maybe later).
As far as the blood, it appears that a 6'5" passenger will scalp himself on the convertible top latch in a wreck. Even though I'm getting new covers, the blood just wiped right up when it dried.
Good news is I'm picking her up tonight! I'll post some teaser pics tonight, but since I'm having to put everything but the nose back on the completed pics will have to wait.
Kevin D.
#24
Senior Member
Thread Starter
iTrader: (2)
Join Date: Oct 1999
Location: Hattiesburg, MS, USA
Posts: 893
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1992 Jade Green---Trans Am Converti
Engine: LS1
Transmission: T56
Ok, I got busted in another thread for not updating this one.. So here's the codes..
GM Aztec Gold - Effect color
Code: 9218 (may be O'reilly's code)
Code2: C9047K M
GM Aztec Gold - Effect color
Code: 9218 (may be O'reilly's code)
Code2: C9047K M
Thread
Thread Starter
Forum
Replies
Last Post
Street Lethal
Power Adders
634
04-30-2019 12:14 PM
colton_carlson
Firebirds for Sale
7
03-08-2019 12:21 PM
kah992
Engine/Drivetrain/Suspension Parts for Sale
2
08-19-2015 02:55 PM