Auto Detailing and Appearance Share tips and tricks on how to make your Third Gen shine! Get opinions on products or how something tasteful looks on your Chevrolet Camaro or Pontiac Firebird.

wheel spacers strength?

Thread Tools
 
Search this Thread
 
Old 08-28-2002, 03:57 PM
  #1  
Junior Member
Thread Starter
 
toddlsf's Avatar
 
Join Date: Feb 2001
Location: Sulphur Springs, IN
Posts: 90
Likes: 0
Received 0 Likes on 0 Posts
wheel spacers strength?

I've got to use about an 1 1/2 inch or 2 inch spacer on my rear wheels. How strong are they? I'm putting 275/40/17 nitto drag radials on the car. It should run 12's or so.
Thanks,
Todd
Old 08-28-2002, 04:31 PM
  #2  
Supreme Member

 
redraif's Avatar
 
Join Date: Feb 2002
Location: Moved... GA still, more garage space!
Posts: 3,266
Likes: 0
Received 1 Like on 1 Post
Car: 87 Red/Blk Bird loaded 3.4L & 700R4
Transmission: Th700R4
Axle/Gears: 3.73
If they are billet, made by a reputable company, and installed properly, they should be fine. I have spacers on all 4 corners of mine and have had no problems. Best bet is to talk to a company that makes them. Make sure they have a warrenty and complete installation instructions. Do a search on the companies as well to see what people think of their product.
Old 08-28-2002, 04:33 PM
  #3  
Junior Member
Thread Starter
 
toddlsf's Avatar
 
Join Date: Feb 2001
Location: Sulphur Springs, IN
Posts: 90
Likes: 0
Received 0 Likes on 0 Posts
redraif, What kind of power are you putting to the ground?

They will be billet.
Old 08-28-2002, 06:21 PM
  #4  
Supreme Member

 
redraif's Avatar
 
Join Date: Feb 2002
Location: Moved... GA still, more garage space!
Posts: 3,266
Likes: 0
Received 1 Like on 1 Post
Car: 87 Red/Blk Bird loaded 3.4L & 700R4
Transmission: Th700R4
Axle/Gears: 3.73
Soon 400+. Right now, not worth mentioning. Spacers should be safe on a 12 second car. That not much more than a stock 4th gen. Keith Manny at Year One has been running spacers for a couple years. Joe says he thinks the car runs 12s. Give him a call. He can probably steer you the right way. 800-950-9503.
Old 08-28-2002, 06:51 PM
  #5  
Senior Member
 
logikal6785's Avatar
 
Join Date: Apr 2002
Location: san diego, ca
Posts: 645
Likes: 0
Received 0 Likes on 0 Posts
heh ... not worth mentioning at all ? not even for the grin factor ?
Old 08-29-2002, 10:51 AM
  #6  
Supreme Member

 
redraif's Avatar
 
Join Date: Feb 2002
Location: Moved... GA still, more garage space!
Posts: 3,266
Likes: 0
Received 1 Like on 1 Post
Car: 87 Red/Blk Bird loaded 3.4L & 700R4
Transmission: Th700R4
Axle/Gears: 3.73
What my HP #s? Oh I already got berated once by a guy. Though its good for a V-6. The V-6 guys were impressed a 140,000+ motor could still run stock #s. My torque was higher than stock though. Let me get the injectors fixed and then I will Dyno it again.
Old 08-29-2002, 12:14 PM
  #7  
Member

 
nosaint's Avatar
 
Join Date: Jul 1999
Location: Calgary, Canada
Posts: 479
Likes: 0
Received 0 Likes on 0 Posts
Car: 1986 Trans Am
Engine: 305 TPI
Transmission: Auto
Are u worried that your rim will break?
No...its the same as bolting on a wheel.

PM askulte for more
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
JB82Z-28
Exterior Parts Wanted
8
10-06-2015 09:05 AM
xXIROC ZXx
Wheels and Tires
9
09-15-2015 11:18 PM
Fionnla
Wheels and Tires
1
09-11-2015 11:07 PM
punkmaster98
Interior Parts for Sale
0
09-08-2015 09:45 PM
turbobuick88
Wheels and Tires
0
09-08-2015 08:27 PM



Quick Reply: wheel spacers strength?



All times are GMT -5. The time now is 03:03 AM.