fourspeed

i emailed a msg to rexorr@americansportscar.com about making spoilers again and he said he will be working on a better mold for a 5 inch spoiler and wants it to be perfect but did not give any details/dates so if you are interested get to bugging him like i will

Kj Rockz

Kewl, I want one...

HrdRockA4305

What sort of 5 inch spoiler do you mean? Like a ducktail/2nd gen kind, or a bigger version of the standard Camaro one, or something totally different?

Jim85IROC

iTrader: (2)

I kind of miss that spoiler. I had planned on buying one when I painted the IROC to help offset my cowl hood, but it was no longer available by then.

Kj Rockz

It's like a taller version of the IROC spoiler...

logikal6785

can someone post a pic of what it looks like ? i'm interested and will bug him too if it looks good =D

Gator_Z28

So are you saying that it is like the spoiler found on a '71 stlye camaro? If so that is cool because i have been looking for one of those myself since that little stock one GM gave doesn't do a dang thang.

TimRS

I think I've got a pic of one on a camaro in a magazine. I'll try to find it and post it. I'll bug the guy too. I want one.

TimRS

Here it is. This an awesome ride. Would you believe a rebuilt 350 from a bus?

TimRS

This pic shows the 5 inch spoiler the best.

Kj Rockz

Ya, thoes are Sweet...

CrazyHawaiian

I want one too!!

Kj Rockz

Sup Crazy, saw ya driving down the road earlier today.

I tried to get your attn. but you too busy gettting off at the PearlRidge exit, on the H1.

Hope to see ya around...

RSFreak

Those used to be available through American Sportscar Design. They called it the 'IROC Spoiler'.

DM91RS

E-mailed them....

Just dropping you a line to find out any info on your making of the IROC spoilers again. It's the only one that I've seen that I want on my Camaro.

Thanks Darrell Meier

Reply:

Hello Darrell we hope to be able to remold the spolier later this fall or winter. sincerely, rex orr



Let's keep mailing to let them know they can sell them.

Tim....I seen that article also. Didn't it say that car was in Ga. also?

TimRS

Yeah, the guy lives in the Columbus, GA area. It says he bought the car from his father-in-law and then the two of them began the work on it. Very cool car in and out.

TimRS

I e-mailed the guy at ASCD today too. If everyone else wants this spoiler as much as they say, lets tell these guys they have a tremendous oppotunity with sales of this part. After all money (sales/orders) talks.

1982chevycamaroz28

hey didnt thunder racing have those awhile back for like $300? i want one too. ive looked everywhere and only place that had them was thunderracing.

HrdRockA4305

Thats kinda neat, its a little more agressive than the standard but its still fairly subtle, it dosen't look one bit out of place.

CrazyHawaiian

..............

Jim85IROC

iTrader: (2)

It looks even better in the pictures than I remembered. Tall enough to balance the cowl hood, but short enough to pass for stock unless you know what you're looking at.

I just may have to buy my first non-functional accessory for the IROC. I'm gonna be a *****!!! :sillylol:

Gator_Z28

It would be great if we can get them making the spoiler agian!!
It would save me the embarassment of making one myself!!

Kj Rockz

I was gonna go out, but I have been having ****ty probs as of late.

I think I'm losing my tranny right now, it's pretty fukid up. Anywayz I'm sure I'll see ya around, there aren't a ton of us on the Island.

What kind of rims did you order? How much?

CrazyHawaiian

Cant wait for a 5 inch spoiler!!!

omnipotentgoku

iTrader: (1)

Thats tight!!! I'd pay $200 or so for that. Hell i'd give em my old one as a trade in if they would take it. Talk the talk and keep the posts updated.

87CIZ

iTrader: (8)

Will 18's fit under a third gen with no mods? I was also interested in the eibach pro springs anyone have any luck with those?

omnipotentgoku

iTrader: (1)

Not likely, the 18's in my rear required that slight modification to the wheel well be made ( bang out the well)

PurplePa$$ionz28

american sports car design made that spoiler. i have it on my car

bj350hp

iTrader: (1)

i made shure to email the Guy about it, he told me it be out this Fall. Man my 87camaro is Gona look so good with it.

REVLIMIT

Hey I remember that wing...I was gonna buy it before but never did. I think it kinda looks like a "drift wing" like most 240's and what not have. I'd mold it if I had it.

Kj Rockz

Dude, thoes are bad ***. They look kinda like C5 rims, but with more of an edge. 2 SWEEEEET.

CrazyHawaiian

Same thing I was thinking Rev!! Hey thanks Kj, when I get em mounted we should meet up so u can check em out. Hey 87CIZ, alot of people will tell you 'No' right off the bat but it is possible. One of the things you gotta remember is that its not the wheel size itself that matters, its the overall size of the wheel with the tire on it. The stock 16's wheel uses 50 series, the guys running 17's run 45 series, the guys running 18's run 40 series and off you go. Same thing when determining the width. I used information from a variety of setups to determine what I was going to run and avoid rubbing. Powermite runs 18x9 265/40/zr18 all around with the Eibach Pro springs and no rubbing at all. Others run 17x9.5 with 275/45/zr17 all around on a 1" drop no problems.


PurplePa$$ionz28, do you happen to have the part/model number? I want to call them and see if they still sell it. Thanks!!!

Jim85IROC

iTrader: (2)

Those are SVO Cobra wheels. They just got a different name for non-ford applications.

CrazyHawaiian

Correct. 2000 Cobra R knockoffs.

DM91RS

Do you have any pics of the spoiler installed?

Thanks

Darrell

pennylessz28

Wish I could get my hands on one of those spoliers before my car gets its Electron Blue Paint job

omnipotentgoku

iTrader: (1)

WHERE DO I GET THAT SPOILER!

Kj Rockz

WHAT HAPPENED TO MY EAR DRUMS?

omnipotentgoku

iTrader: (1)

Seriously.. does anyone know who can make this thing.. or will sell theirs ? I really don't want to wait until september. No lie I cant afford it, i'd still like to know how much I should expect to pay.

Jim85IROC

iTrader: (2)

I'm guessing you didn't bother reading the rest of the thread? The whole point to the thread was that people are trying to get Rex at ASCD to start making it again.

lock

That spoiler is nice! What really stood out to me is that they paintedthe normaly black grill insert to match the main color of the car and it looks very nice. Anyone done that? Dont recall noticing it on other pictures.

john5.7 87Iroc

I always liked that spoiler to. Does anyone know if they had a 3rd brake light version??

omnipotentgoku

iTrader: (1)

Actually I did read the rest.. I am aware that they don't make it, but im sure someone has one that they would be willing to give up, or can even make one.

Spider7

I know you'll all prolly just jump on me for even askin, but would those 5" spoilers fit an '89 TA?? I miss my SC's spoiler and my TA's wrap around is lookin' like ****.... I think it'd be pretty sweet having an Iroc spoiler on instead.

Gator_Z28

I don't know if it would fit but it would look sweet on a T/A! I even dare say almost as good as it would on a Z

Spider7

Yea, i thought it'd be sweet too. Certainly original ya know, at least where I live. I'm gonna to the comapny later and see if it will work.

David Culpepper

Yeah that guy lives in my area, I see that car at local car shows all the time. It is really clean and detailed. His father-in-law as a pretty bad 4th gen too.

omnipotentgoku

iTrader: (1)

more info on this vehicle that has the spoiler ?

Jim85IROC

iTrader: (2)

The 1/4 panels on the firebird are different, so the spoiler won't fit without modifications. Even if you perform the mods to make it fit, I'd imagine it'll look pretty stupid without the tail lights wrapping around to the back of the spoiler like on the Camaro.

FAST RS

I saw that spoiler a few yers back on a Yellow IROC it looked tight. The camaro was dropped nice rims and painted a nice bright yellow