Measurements for IROC door decals needed, can someone go out and measure quick?
#1
Supreme Member
Thread Starter
Join Date: Sep 1999
Location: Ohio, USA
Posts: 1,054
Likes: 0
Received 0 Likes
on
0 Posts
Car: 2015 Camaro Z/28 & 2013 Super Bee
Engine: LS7 and 392 HEMI
Measurements for IROC door decals needed, can someone go out and measure quick?
This is for an 89 IROC, with the decals towards the back of the doors. I forgot to measure the placement of my IROC door decals before the paint job. Can someone go out and measure how far above the door they are (vertical) and how far from the edge of the door the decals starts (horizontal)? PLEASE?
#2
Senior Member
Join Date: Jun 2001
Location: Saskatchewan
Posts: 920
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1986 Iroc
Engine: 454 Demon 850DP
Transmission: TH350, 3500 stall
Axle/Gears: 3.73
My Iroc is a 1986 but I assume they are in the same place. The bottom of the decal is 3 and 3/8 inches from the bottom of the door and the left most start of the decal is 21 inches from the front edge of the door. Hope that helps.
#3
Supreme Member
Thread Starter
Join Date: Sep 1999
Location: Ohio, USA
Posts: 1,054
Likes: 0
Received 0 Likes
on
0 Posts
Car: 2015 Camaro Z/28 & 2013 Super Bee
Engine: LS7 and 392 HEMI
Originally posted by onyxdawg
My Iroc is a 1986 but I assume they are in the same place. The bottom of the decal is 3 and 3/8 inches from the bottom of the door and the left most start of the decal is 21 inches from the front edge of the door. Hope that helps.
My Iroc is a 1986 but I assume they are in the same place. The bottom of the decal is 3 and 3/8 inches from the bottom of the door and the left most start of the decal is 21 inches from the front edge of the door. Hope that helps.
#6
Member
Join Date: Nov 2000
Location: Mt. Home, ID
Posts: 490
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1986 IROC
Engine: 305 going to 355
Transmission: 700R4
Re: Measurements for IROC door decals needed, can someone go out and measure quick?
Originally posted by BuckeyeROC
This is for an 89 IROC, with the decals towards the back of the doors. I forgot to measure the placement of my IROC door decals before the paint job. Can someone go out and measure how far above the door they are (vertical) and how far from the edge of the door the decals starts (horizontal)? PLEASE?
This is for an 89 IROC, with the decals towards the back of the doors. I forgot to measure the placement of my IROC door decals before the paint job. Can someone go out and measure how far above the door they are (vertical) and how far from the edge of the door the decals starts (horizontal)? PLEASE?
Mark
#7
"Locate decals 3-3/4" from
Front door edge 1985-87
Rear door edge 1988-90"
Locate decals 1-9/16" from bottom door edge (top of GFX)
Application instructions here (click on "support")
Front door edge 1985-87
Rear door edge 1988-90"
Locate decals 1-9/16" from bottom door edge (top of GFX)
Application instructions here (click on "support")
Last edited by Saywhut; 10-03-2002 at 11:38 AM.
Thread
Thread Starter
Forum
Replies
Last Post
1992 Trans Am
History / Originality
27
05-10-2023 07:19 PM
mustangman65_79
Body
3
08-11-2015 03:17 PM