adding iroc gfx to berlinetta
#1
Junior Member
Thread Starter
Join Date: Oct 2008
Location: lee's summit, mo
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
Car: 87 camaro
Engine: 305
Transmission: 700r4 shift kit
adding iroc gfx to berlinetta
i have an 87 berlinetta and i was wanting to know what would be the easiest way on mounting them to my car
#2
Junior Member
Thread Starter
Join Date: Oct 2008
Location: lee's summit, mo
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
Car: 87 camaro
Engine: 305
Transmission: 700r4 shift kit
Re: adding iroc gfx to berlinetta
no the actual ground effects off of an iroc putting them on a base model not decals and i bought the car for 500 dollars
#3
Member
Join Date: Sep 2003
Posts: 232
Likes: 0
Received 0 Likes
on
0 Posts
Car: 2011 6.2 Silverado, 88/85 camaro
Re: adding iroc gfx to berlinetta
Being 100% honest here, the guy I bought mine from scammed me years back, short of going down to PA to blow his door down and hang him upside down from his manhood, I recieved most of the ground effects, but didnt recieve the mount hardware from him. I then made some sheet metal brackets and used 5/16" zip screws, worked great.
#4
Supreme Member
iTrader: (167)
Re: adding iroc gfx to berlinetta
First; Your car is an 87 - It's not a Berlinetta. With that out of the way,.......
Take a look at this picture:
The 2 braces at the bottom of the pic are the kind you will need - or need to make - in order to install Ground FX on your Coupe. (Disregard the braces at the top of the picture - they are for a Trans Am.) The brackets are factory F-Body brackets that can be used on ALL 82-92 F-Bodies. ( they ould need to be trimmed for use on the 91-92 Ground FX )
I might still have an extra set of them; If your interested in buying a pair just send me a PM with your ZIP CODE. I'll dig around later today to see If I can find a pair.
Take a look at this picture:
The 2 braces at the bottom of the pic are the kind you will need - or need to make - in order to install Ground FX on your Coupe. (Disregard the braces at the top of the picture - they are for a Trans Am.) The brackets are factory F-Body brackets that can be used on ALL 82-92 F-Bodies. ( they ould need to be trimmed for use on the 91-92 Ground FX )
I might still have an extra set of them; If your interested in buying a pair just send me a PM with your ZIP CODE. I'll dig around later today to see If I can find a pair.
#5
Supreme Member
iTrader: (10)
Join Date: Oct 2007
Location: Fl.
Posts: 1,881
Likes: 0
Received 2 Likes
on
2 Posts
Car: 83 Trans Am / 96 Jeep XJ
Engine: 355 / 4.0 I6
Transmission: TH350 / Auto
Axle/Gears: 3.23 10-bolt / 4wd
Re: adding iroc gfx to berlinetta
I Have a set of those metal brackets needed to mount GFX to your car, LMK as well.
#6
Senior Member
iTrader: (1)
Join Date: Oct 2008
Location: Western Washington
Posts: 644
Likes: 0
Received 0 Likes
on
0 Posts
Car: 86 T/A
Engine: 5.0 TPI
Transmission: 700R4
Re: adding iroc gfx to berlinetta
The brackets pictured above are for the rocker panel mouldings. The door mouldings go on with nuts on the studs that stick thru the door. You need to spend some time carefully laying out the holes and then drill them. Fenders are about the same. If you are taking them off the donor car yourself, you have the best chance to get them on properly.
Thread
Thread Starter
Forum
Replies
Last Post
1992 Trans Am
Exterior Parts for Sale
5
04-04-2016 12:50 PM
mustangman65_79
Body
3
08-11-2015 03:17 PM