new/used iroc hood louvers????
03-04-2011, 05:57 PM
#1
Member
Thread Starter
iTrader: (1)
Join Date: Nov 2008
Location: Sinking Spring, Pa
Posts: 291
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91' camaro rs and an 87' trans am
Engine: stang eater..slower ones. lolololol
Transmission: 700r4-camaro t5-trans am
Axle/Gears: stock :(
new/used iroc hood louvers????
hey guys, where can i find some new or used iroc-z hood louvers. or if there is anyway i can have them stay on. there is no plastic peices to fasten to the hood......dont wanna look on the highway for a missing louver.
03-04-2011, 06:05 PM
#3
Supreme Member
Join Date: Sep 2002
Location: Cary, North Carolina
Posts: 9,192
Likes: 0
Received 16 Likes
on
16 Posts
Car: 1992 RS
Engine: Carbed 350
Transmission: 700R4
Axle/Gears: 3.42 posi
Re: new/used iroc hood louvers????
New are actually old staock parts that were never sold - they show up on ebay every so often, about $200 anymore for a set.
Most used will have the same issue as yours, broken plastic studs - but might be able to snag a used set in better shape than yours. But don't expect to get a used set with all tabs in tact cheaper than the "New".
Alot of folks get bolts and use 5 min epoxy, smooth out on the louver where the plastic stud is broken, and epoxy 1/4" bolts to the louver - then use nuts on the underside. Make sure to use alot of epoxy, and cover the head of the bolt in glue so that it'll hold well.
Most used will have the same issue as yours, broken plastic studs - but might be able to snag a used set in better shape than yours. But don't expect to get a used set with all tabs in tact cheaper than the "New".
Alot of folks get bolts and use 5 min epoxy, smooth out on the louver where the plastic stud is broken, and epoxy 1/4" bolts to the louver - then use nuts on the underside. Make sure to use alot of epoxy, and cover the head of the bolt in glue so that it'll hold well.
03-04-2011, 06:32 PM
#6
Supreme Member
Join Date: Sep 2002
Location: Cary, North Carolina
Posts: 9,192
Likes: 0
Received 16 Likes
on
16 Posts
Car: 1992 RS
Engine: Carbed 350
Transmission: 700R4
Axle/Gears: 3.42 posi
Re: new/used iroc hood louvers????
I meant a link at Classic Industries. I new they were all over ebay.
Trending Topics
03-04-2011, 06:59 PM
#8
Supreme Member
Join Date: Sep 2002
Location: Cary, North Carolina
Posts: 9,192
Likes: 0
Received 16 Likes
on
16 Posts
Car: 1992 RS
Engine: Carbed 350
Transmission: 700R4
Axle/Gears: 3.42 posi
Re: new/used iroc hood louvers????
No hood louvers there for a 3rd gen - Classic doesn't sell them 
03-26-2011, 10:46 PM
#10
Senior Member
iTrader: (5)
Join Date: Apr 2008
Location: Putnam Valley, NY
Posts: 696
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1992 RS 6spd
Engine: Carbed 357c.i.
Transmission: Built T56
Axle/Gears: Soon to be Strange S60
Re: new/used iroc hood louvers????
Pretty sure Hawks third gen sells them, but I could be wrong. I know for a fact that I saw the 91-92 blisters on there.
Thread
Thread Starter
Forum
Replies
Last Post
Iroc8t8
TPI
43
08-26-2015 08:14 AM
mustangman65_79
Body
3
08-11-2015 03:17 PM
