aqualordx93

I hope this is the right spot for this thread, and yes i know this topic has been talked about for ages.
(yes i did do a search nd found some things but nothing for what i need)

OK!!!

So i was at auto zone today (***** heaven?) I found Lights that look exactly like OEM fog lights for my camaro.
They are Pilot Brand

http://www.pilotautomotive.com/Produ...roductID=27176

That is them.

Now my question is, my Camaro doesn't have the old Fog light mounting hardware. Is there any other way to install these? i know a few people have used these fog lights because OEM cost an arm and a leg.


Any help would be GREATLY appreciated. Thanks!!

camaronewbie

Inside the foglight area, on the bottom, there are 3 holes. GM used the outer two holes for the factory mount. You can use the center hole for the aftermarket lights you have.

aqualordx93

Awesome. AHH YOUR RIGHT!!! Thank you so much!!! Now the wiring should be fun.

travis401

iTrader: (1)

those arent exactly like stock, but pretty close.. do they include a wiring kit? if not vatozone should also have a wiring kit to install them.

58mark

iTrader: (3)

I had those on my car, took them off to go to factory lights, and now and thinking of putting them back on because the lenses look more like the clear turn signal lamps I bought.

travis401

iTrader: (1)

i wanna see those clear turn signals..

58mark

iTrader: (3)

i got the matching side markers too

travis401

iTrader: (1)

how much and were from? and seeing that polished v-6 intake always gets me

58mark

iTrader: (3)

thanks travis!

I did the ebay thing... $53

http://cgi.ebay.com/ebaymotors/ws/eB...K%3AMEWNX%3AIT

not bad at all for the lamps and the side markers

travis401

iTrader: (1)

mine are dingy as all hell, i dont feel like taking them apart and cleaning them out. $53 for new sounds like a deal......back to topic now that were done hijacking

58mark

iTrader: (3)

yeah, I DID take mine apart, cleaned, polished, put them back together, and they will never come close to looking as good as the aftermarkets


oh, to support the OP, if he wants a picture of those lamps on the correct GM bracket, I can provide that to show him how to do it

travis401

iTrader: (1)

I dont think he has the OEM bracket. They should come with a generic bracket you can make work.

58mark

iTrader: (3)

if he could get a bracket set and the aftermarket lights, it would be still be a LOT cheaper than OEM lights with the OEM brackets

aqualordx93

I have 1 bracket actually. i still have the old fog light wiring still hooked up right next to where they go. Not sure if the Kit that comes with the ones from autozone will work, or ill have to modify them. The auto zone kit comes with wiring kit and a switch, but ide rather it look stock.

nice clear side markers/turn signals.
Im probably going to go smoked.

And yes Pictures would be nice 58Mark if it isn't to much trouble.

travis401

iTrader: (1)

if you still have the wiring and the switch, then its as easy as cutting the connectors off the stock wiring and wiring in the new fog lights to that. then theyll function just like stock, with the stock switch.

aqualordx93

Good! glad i dont have to re wire. i hate wiring things. Only thing i have to wire is my interior LED tubes..for now..