1LE Brakes Parts List
#1
Member
Thread Starter
Join Date: Aug 2003
Location: Bakersfield
Posts: 466
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1985 IROC-Z
Engine: 1989 350 4 bolt roller block
Transmission: ProBuilt 700R4 Road Race with Edge 9.5" 2800 stall lockup converter
1LE Brakes Parts List
Does anybody have a parts list for 1LE Brakes, front and rear. I need part numbers for everything including the master cylinder. I have four wheel disc already but they are the small stuff.....
I've read a ton of posts but nothing that had a complete list of part numbers for the switch. Most posts were on the merits of using C4HD vs 1LE vs 98+ LS1..... I have 16" Eagle rims that I would like to keep..... They look very similar to some Ronals I saw in one post......
I've read a ton of posts but nothing that had a complete list of part numbers for the switch. Most posts were on the merits of using C4HD vs 1LE vs 98+ LS1..... I have 16" Eagle rims that I would like to keep..... They look very similar to some Ronals I saw in one post......
#2
Member
Join Date: Jan 2004
Location: Buffalo, NY
Posts: 348
Likes: 0
Received 0 Likes
on
0 Posts
Car: 89 WS6
Engine: 305 TPI
Transmission: T5
Axle/Gears: 10 bolt T2R w/ 3:23
I tried to get the formatting right but it just was not working for me.
'82-'92 F-Car HD Brake Parts
Description, Qty GM Grp No GM Part No Jobber Price, Ea (1996)
FRONT ONLY
LH steering knuckle (x1) 6.020 18016737 $ 180
RH " " " " 18016738 $ 180
Mounting plate (x2) 4.665 18016034 $ 9
Plate-to-knuckle bolt (x4) " 14084051
LH caliper bracket (x1) " 10132829 $ 22
RH " " " " 10132830
Bracket-to-plate bolt (x4) " 11508133
Washer " " 14080254
Inner bearing seal (x2) 6.326 3965092
Inner bearing " 6.311 457196
Brake rotor/hub " 5.809 18016035 $ 78
Outer bearing " 6.313 457049
Washer " 6.321 457707
Castle nut " 6.022 18018567
Bearing dust cap " 6.330 14003444
LH caliper (x1) 4.665 10132827 $ 271
RH " " " 10132828 $ 271
Pad kit " 5.017 10104485 $ 108
LH hose " 4.680 10113075 $ 11
RH " " " 10113076 $ 11
REAR ONLY
LH mounting plate (x1) 5.001 10136853 $ 10
RH " " " " 10136854 $ 10
Caliper bracket (x2) 4.665 10112652 $ 25
Bracket-to-plate bolt (x4) 8.900 10097602
Caliper pin " 4.665 14067560
Pin boot " " 14067552
Caliper-to-pin bolt " " 14067559
Brake rotor (x2) 5.809 10087702 $ 53
LH caliper (x1) 4.665 10132831 $ 166
RH " " " 10132832 $ 166
Pad kit " 5.017 10174840 $ 81
LH hose " 4.680 17988596 $ 15
RH hose " " 17990890 $ 15
OTHER
Hose-to-caliper bolt (x4) 4.671 14047782
Copper gasket (x8) " 14076180
Bleeder valve (x4) 4.666 14071826
Bleeder dust cap " " 14089150
Master cylinder (x1) 4.650 18014286 $ 135
Proportioning valve " 4.690 10164112 $ 44
'82-'92 F-Car HD Brake Parts
Description, Qty GM Grp No GM Part No Jobber Price, Ea (1996)
FRONT ONLY
LH steering knuckle (x1) 6.020 18016737 $ 180
RH " " " " 18016738 $ 180
Mounting plate (x2) 4.665 18016034 $ 9
Plate-to-knuckle bolt (x4) " 14084051
LH caliper bracket (x1) " 10132829 $ 22
RH " " " " 10132830
Bracket-to-plate bolt (x4) " 11508133
Washer " " 14080254
Inner bearing seal (x2) 6.326 3965092
Inner bearing " 6.311 457196
Brake rotor/hub " 5.809 18016035 $ 78
Outer bearing " 6.313 457049
Washer " 6.321 457707
Castle nut " 6.022 18018567
Bearing dust cap " 6.330 14003444
LH caliper (x1) 4.665 10132827 $ 271
RH " " " 10132828 $ 271
Pad kit " 5.017 10104485 $ 108
LH hose " 4.680 10113075 $ 11
RH " " " 10113076 $ 11
REAR ONLY
LH mounting plate (x1) 5.001 10136853 $ 10
RH " " " " 10136854 $ 10
Caliper bracket (x2) 4.665 10112652 $ 25
Bracket-to-plate bolt (x4) 8.900 10097602
Caliper pin " 4.665 14067560
Pin boot " " 14067552
Caliper-to-pin bolt " " 14067559
Brake rotor (x2) 5.809 10087702 $ 53
LH caliper (x1) 4.665 10132831 $ 166
RH " " " 10132832 $ 166
Pad kit " 5.017 10174840 $ 81
LH hose " 4.680 17988596 $ 15
RH hose " " 17990890 $ 15
OTHER
Hose-to-caliper bolt (x4) 4.671 14047782
Copper gasket (x8) " 14076180
Bleeder valve (x4) 4.666 14071826
Bleeder dust cap " " 14089150
Master cylinder (x1) 4.650 18014286 $ 135
Proportioning valve " 4.690 10164112 $ 44
#3
Moderator
iTrader: (5)
The following link may provide some info:
https://www.thirdgen.org/techbb2/sho...hreadid=249098
JamesC
https://www.thirdgen.org/techbb2/sho...hreadid=249098
JamesC
#4
Member
Thread Starter
Join Date: Aug 2003
Location: Bakersfield
Posts: 466
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1985 IROC-Z
Engine: 1989 350 4 bolt roller block
Transmission: ProBuilt 700R4 Road Race with Edge 9.5" 2800 stall lockup converter
Thanks Guys!!!!
I already have a copy of the page you linked JamesC. I am probably going with the C4HD stuff at this point as it looks to be way cheaper, Albeit more research into prices is needed on the 1LE stuff. There are prices for calipers and rotors being bandied about in some other posts that are one-third of what you listed Souseless. However, I am very grateful for the list you put together!!!!!!!! No matter where I buy the stuff, I needed the part numbers in order to know what to buy......
I already have a copy of the page you linked JamesC. I am probably going with the C4HD stuff at this point as it looks to be way cheaper, Albeit more research into prices is needed on the 1LE stuff. There are prices for calipers and rotors being bandied about in some other posts that are one-third of what you listed Souseless. However, I am very grateful for the list you put together!!!!!!!! No matter where I buy the stuff, I needed the part numbers in order to know what to buy......
#5
Member
Join Date: Jan 2004
Location: Buffalo, NY
Posts: 348
Likes: 0
Received 0 Likes
on
0 Posts
Car: 89 WS6
Engine: 305 TPI
Transmission: T5
Axle/Gears: 10 bolt T2R w/ 3:23
My list was not posted as a list of parts that I sell. In fact some of the parts can not be purchased new from anywwhere. The prices were just a part of the list. The 8 digit number that preceedes the prices is a GM number.
#6
Member
Thread Starter
Join Date: Aug 2003
Location: Bakersfield
Posts: 466
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1985 IROC-Z
Engine: 1989 350 4 bolt roller block
Transmission: ProBuilt 700R4 Road Race with Edge 9.5" 2800 stall lockup converter
Souseless: Didn't know that you sold anything and I most definitley was not trying to bag on you in any way!!!!!!!! I do appreciate what you did and I also recognize that GM is the highest price on just about anything......
I have GM catalogs so I recognized the format quickly. I have since put everything into an Excel spreadsheet and used formulas to automatically calculate the prices. Not everything had a price and it was still over $2200.... That is why I will most likely go with the Corvette stuff.
I will also probably buy the "customized" parts from someone on this board. I don't want to spend that kind of money until next year's income tax return as I am going on a two week trip overseas in May and I'm blowing the budget if you know what I mean.
Some parts I will be able to pick up here and there but it's no real rush as everything in my brake system is currently new and I need to prioritize some other repair work first. It would be nice to drive the car instead of seeing it up on jack stands so much. I need about three solid days of work to get everything where it needs to be and I don't have that much free time in a month!!!!!
I have GM catalogs so I recognized the format quickly. I have since put everything into an Excel spreadsheet and used formulas to automatically calculate the prices. Not everything had a price and it was still over $2200.... That is why I will most likely go with the Corvette stuff.
I will also probably buy the "customized" parts from someone on this board. I don't want to spend that kind of money until next year's income tax return as I am going on a two week trip overseas in May and I'm blowing the budget if you know what I mean.
Some parts I will be able to pick up here and there but it's no real rush as everything in my brake system is currently new and I need to prioritize some other repair work first. It would be nice to drive the car instead of seeing it up on jack stands so much. I need about three solid days of work to get everything where it needs to be and I don't have that much free time in a month!!!!!
Thread
Thread Starter
Forum
Replies
Last Post
1992 Trans Am
History / Originality
27
05-10-2023 07:19 PM
Terrell351
Engine/Drivetrain/Suspension Parts for Sale
5
06-13-2021 01:13 PM