FSTFBDY

iTrader: (33)

1992 Camaro RS Convertable
121,000 miles on chassis. Less then 1000 miles on engine.
Car needs painted. (its a 10 footer)

Has :
New Black viny Top
new black carpet
Harwood 3inch cowl hood
new grill
Black interior in good condition. Small hole in D.side front seat.(smaller then a quarter.)
17" 10 spoke rims 2inch skulte spacers , with kuhmo escta supra 275/40/17 (65+% life left)
Polly motor mounts
Alloy eng. caster/camber plates

Engine Info:
'94 LT1 383 Stroker
Callies racemaster crank, Callies Pro I rods. Everything's balanced
JE -33cc dished pistons.(Thermal Coated) with Hellfire rings
stock ported heads (Thermal coated valves and chambers)
All coated Clevite bearings
All ARP Bolts
comp xfi cam 224/236 @.050 .502/.510 with 1.5's
Polished valve covers & fuel rails.
Intake has been converted to run Distributor. (no more opti spark)
MSD PRO Billet Distrib.
LT4 timing chain set
LT4 valve covers
50lb Injectors
78mm turbonetices turbo and custom turbo setup. w/ FMIC
Tial 50mm BOV
Tial 44mm waste gate
innovate motorsports lc1 wb o2 setup.
csr Electric water pump
3bar map sensor
Road race oil pan & pick up.
An fitting and braided lines for Power steering pump and supercharger oil feed and return.
3chamber flowmaster where cat use to be with turn down
Has LT1 aluminum 90* tb intake tube.

FTI Built Stage 2 Th400 , transgo shift kit. deep aluminum pan
PTC 3500 converter.
9 bolt rear with 3.45's
Spohn adjustable trq arm and crossmember,(TRQ Arm mounts to the crossmember NOT the tranny) (t56 crossmember (t56 was future plan)
Comp. Eng. Main Hoop for a 8point roll bar welded in. Never got around to finishing the rest.

Running on $59 code with the 7730 ecm. www.code59.org


Havent been motivated to work on it.
Few pic's





Engine pic's when I tore it down to freshing it all up. few years ago
http://www.cecoatings.com/images/Car...20pistons2.jpg
http://www.cecoatings.com/images/Car...1/DSC04298.JPG
http://www.cecoatings.com/images/Car...1/DSC04297.JPG
http://www.cecoatings.com/images/Car...1/DSC04318.JPG

http://www.cecoatings.com/images/Car...rfolk%20Beach/


No motivation to touch it. or finish it how I really want the combo. $6000 obo
Consider trades and $$ Just not looking for any projects.

Located in SW FL.

armyguy33428

where is the car located at?

FSTFBDY

iTrader: (33)

SW FL. 34288 area

armyguy33428

would the car the way it sets make a 400 mile round trip?

FSTFBDY

iTrader: (33)

No,I wouldnt right now.
Supercharger intake tube still needs finished. And The Th400 needs put in.
Still has a 700r4 that starts to slip when it gets hot.

I have everything for the Th400 swap but never got motivated to put it in. (Really rather a T56 is why I haven't put the Th400 in yet)

Kambitsis

5k is what I can offer




QUOTE=FSTFBDY;4984129]1992 Camaro RS Convertable
121,000 miles on chassis. Less then 1000 miles on engine.
Car needs painted.
Missing center piece of spoiler. (never looked for one because I planed to add my 92 hirise spoiler)

Has :
New Black viny Top
new black carpet
Harwood 3inch cowl hood
new grill
Black interior in good condition. Small hole in D.side front seat.(smaller then a quarter.)
17" 10 spoke rims 2inch skulte spacers , with kuhmo escta supra 275/40/17 (65+% life left)
Polly motor mounts
Alloy eng. caster/camber plates

Engine Info:
'94 LT1 383 Stroker
Callies racemaster crank, Callies Pro I rods. Everything been balanced
JE -33cc dished pistons.(Thermal Coated) with Hellfire rings
stock ported heads (Thermal coated valves and chambers)
All coated Clevite bearings
All ARP Bolts
comp xfi cam 224/236 @.050 .502/.510 with 1.5's
Polished valve covers & fuel rails.
Intake has been converted to run Distributor. (no more opti spark)
MSD PRO Billet Distrib.
LT4 timing chain set
50lb Injectors
Novi 2000 Super charger 7.65 crank 3.5 sc pulleys
innovate motorsports lc1 wb o2 setup.
csr Electric water pump
3bar map sensor
Canton Road race oil pan & pick up.
An fitting and braided lines for Power steering pump and supercharger oil feed and return.
stainless SLP Headers and Y pipe. 3chamber flowmaster where cat use to be with turn down

Built Th400 , transgo shift kit. deep aluminum pan
PTC 3500 converter.
9 bolt rear with 3.45's
Spohn adjustable trq arm and crossmember,(TRQ Arm mounts to the crossmember NOT the tranny) (t56 crossmember (t56 was future plan)
Comp. Eng. Main Hoop for a 8point roll bar welded in. Never got around to finishing the rest.

Running on $59 code with the 7730 ecm. www.code59.org


Havent been motivated to work on it.
Need to finish a new intake to sc tube. (was pcv mocked up) and some good driving to datalog and tune it.

Few pic's





Engine pic's when I tore it down to freshing it all up. few years ago
http://www.cecoatings.com/images/Car...20pistons2.jpg
http://www.cecoatings.com/images/Car...1/DSC04298.JPG
http://www.cecoatings.com/images/Car...1/DSC04297.JPG
http://www.cecoatings.com/images/Car...1/DSC04318.JPG

http://www.cecoatings.com/images/Car...rfolk%20Beach/

Video of current state.
http://www.youtube.com/watch?v=ZJofTL0rMmA

No motivation to touch it. or finish it how I really want the combo. $6500 obo
Consider trades and $$ Just not looking for any projects.

Prob. forgetting something so just ask.[/QUOTE]

FSTFBDY

iTrader: (33)

Pm me your phone number or email it to me.

BlueZee28

iTrader: (30)

That guy is a joke. He's been popping into a few for sale threads tossing out offers. Did it in my for sale thread also...even told me to send him my paypal address so he can send me a small deposit to hold the car until after New years...we agreed on a price, he asked for a video of the car running before he sent the deposit...I sent the video and haven't heard from him since Sunday...what a joke.

tgk7203

still for sale

FSTFBDY

iTrader: (33)

Havent been pushing trying to sell. If it does it does. If not no big deal. Its not something I have to get rid of. Just have other interests.

So if your serious. Sure shoot me email with your cell phone # and well go from there.

FSTFBDY

iTrader: (33)

BUMP..

Would trade for a Sports Bike ( 2005 + GSXR , R1 , ZX9r , etc.. ,
LS1 /T56 swapped car. etc..

Looking for something more of a Daily Driver.
My Vert has been a garage queen to long Only getting taken out once a month.
Started every week and taken around the block now and then thats about it anymore.

Grifter757

iTrader: (5)

cars a turd


Good deal to someone who buys it.

speedz28

trade for iroc race car ???

FSTFBDY

iTrader: (33)

Thanks but no thanks.

Supercharger just sold. Back to a turbo I go for some motivation to keep the car.
(for now) Im sure I'll list it again with the turbo setup next...lol

Grifter757

iTrader: (5)

Gotta turbo for you...

FSTFBDY

iTrader: (33)

guess what.. Non motivated to mess with my caragain post.

As above still needs the Th400 conversion put in. (has 700r4 that slips when it gets hot still in it)

but now has
Turbo parts are all NEW. Only thing used are the headers and a2a fmic

Turbonetics tc78 turbo 1.15 a/r hot side / divided housing / ceramic coated
Tial 50mm BOV / Tial 44mm waste gate
A2A Front Mount Intercooler setup.

turbo parts















Turbo setup in the works on my 383 lt1 using corvette bracket and aces.






Trade for sports bike. quads , 4th gen TA , or...???
Partial trade + Cash , etc..

I have NO NEED to sell. So no lowball or other "projects"

FSTFBDY

iTrader: (33)

bump...

BADNBLK

iTrader: (11)

Strut mounts.....

FSTFBDY

iTrader: (33)

I thought you got some?


Bump..
trade for a Kawasaki Teryx or similar side x side , etc...

BADNBLK

iTrader: (11)

Dude backed out last minute, then I kinda stopped caring.

FSTFBDY

iTrader: (33)

That sucks... I think Im about to try and sell the car as a rollin chassis. If it doesn't get any bites I'll get back to ya on the strut mounts. PM me your offer again I forget and well go from there.