QuickStyle

in order to get my griffin radiator to fit, i had to remove the stock cooler lines, the ones that run along the bottom of the radiator. interesting enough i was able to fit a tube and fin cooler from a 4th gen honda prelude in the stock location, it even lined up perfectly to the stock mounting location, and i used the same bolts. so i thought i would make a post and tell people about a simple mod, and im sure it cools better than the stock lines because it has the cooling fins on it.

what you need to find is a 92-95 honda prelude, its a U-shaped tube that is mounted in front of the condenser.

kcb37

Looks good,
sometimes creativity is a good thing.