New information on CARBED vehicles and WinALDL
04-04-2003, 05:32 AM
#1
Senior Member
Thread Starter
Join Date: Oct 2001
Location: Timrå, Sweden
Posts: 930
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1984 Corvette
Engine: Turbo 350
Transmission: 4L80E with TCI T-Com
New information on CARBED vehicles and WinALDL
New information on CARBED vehicles and WinALDL.
It has worked for some and others have not been able to get any data. I have now found out that some use different voltage levels on the ALDL port. They also have a differnt data timing.
With the help of another guy with access to both a TBI and a carbed vehicle we tried a modified cable interface. The carbed vehicle that did not work with the standard cable. It worked great with an additional 1.5k resistor between the base and emitter on the transistor. With this resistor installed the cable did NOT work with the TBI vehicle. The carbed vehicle also had to use the 4800 baud setting in the configuration dialog to work.
http://w1.601.telia.com/~u60113744/s.../aldlcable.htm
It has worked for some and others have not been able to get any data. I have now found out that some use different voltage levels on the ALDL port. They also have a differnt data timing.
With the help of another guy with access to both a TBI and a carbed vehicle we tried a modified cable interface. The carbed vehicle that did not work with the standard cable. It worked great with an additional 1.5k resistor between the base and emitter on the transistor. With this resistor installed the cable did NOT work with the TBI vehicle. The carbed vehicle also had to use the 4800 baud setting in the configuration dialog to work.
http://w1.601.telia.com/~u60113744/s.../aldlcable.htm
Last edited by JoBy; 04-04-2003 at 06:20 AM.
Thread
Thread Starter
Forum
Replies
Last Post
Hotrodboba400
Firebirds for Sale
3
12-10-2019 07:07 PM
GeneralIesrussi
Tech / General Engine
0
09-03-2015 03:23 AM
