Oil temperature sensor
09-11-2005, 08:26 PM
#1
Member
Thread Starter
Join Date: Mar 2002
Location: Lake Oswego, OR
Posts: 165
Likes: 0
Received 0 Likes
on
0 Posts
Oil temperature sensor
Hey guys, quick quesiton.
I'm looking to add a oil temp sensor to my 91z with the 7730 ECM. Is there already an input on the ECU for this? I believe craig moates scanner has an output for it.
On more of a technical side, where would be the best location for an oil temp sensor?
I'm looking to add a oil temp sensor to my 91z with the 7730 ECM. Is there already an input on the ECU for this? I believe craig moates scanner has an output for it.
On more of a technical side, where would be the best location for an oil temp sensor?
09-11-2005, 08:33 PM
#2
Yep, it's there in the 8D code.
AUJP has the DTC turned off.
I didn't look very hard but it appeared to work.
Look on Ludis at the 7730 connector page to see where it goes. Some blocks have a little tapped hole above the oil filter. But it's about impossible to get the plug out.
If you have a remote oil filter setup or an actual oil cooler like the trucks you can put it in the cooler supply line.
Or weld a bung on your oil pan and punch a hole.
AUJP has the DTC turned off.
I didn't look very hard but it appeared to work.
Look on Ludis at the 7730 connector page to see where it goes. Some blocks have a little tapped hole above the oil filter. But it's about impossible to get the plug out.
If you have a remote oil filter setup or an actual oil cooler like the trucks you can put it in the cooler supply line.
Or weld a bung on your oil pan and punch a hole.
Thread
Thread Starter
Forum
Replies
Last Post
Hotrodboba400
Firebirds for Sale
3
12-10-2019 07:07 PM
