A few pics of my progress...
02-10-2007, 10:43 PM
#1
Supreme Member
Thread Starter
iTrader: (1)
Join Date: Jun 2001
Location: 600 yds out
Posts: 1,520
Likes: 0
Received 0 Likes
on
0 Posts
Car: Bee-Bowdy
Engine: blowd tree-fity
Transmission: sebin hunnerd
Axle/Gears: fo-tins
A few pics of my progress...
To those out there who are into any kind of wiring setup or injection swap, here's so motivational pics.
I got the old CC QJet harness out and disconnected. I got the carb off and new dizzy dropped in. I added 5 more wires to the Howell EFI harness I bought used for use with the EBL. I'm getting closer...
The modified BBC TBI. I'm going to use an Aeromotive boost referenced regulator up to 29 psi. I've heard the stock regulator diaphram becomes a problem at the pressure to I took it out of the equation.
me with my best bewildered look...
I got the old CC QJet harness out and disconnected. I got the carb off and new dizzy dropped in. I added 5 more wires to the Howell EFI harness I bought used for use with the EBL. I'm getting closer...
The modified BBC TBI. I'm going to use an Aeromotive boost referenced regulator up to 29 psi. I've heard the stock regulator diaphram becomes a problem at the pressure to I took it out of the equation.
me with my best bewildered look...
02-11-2007, 08:04 PM
#2
Senior Member
Join Date: Aug 2004
Location: Shippensburg, PA
Posts: 680
Received 0 Likes
on
0 Posts
Car: 1981 Buick Century Wagon
Engine: 87 GN engine
Transmission: 2004R
Axle/Gears: 3.73
Looking good man. Keep us posted with the build up pics. I hope that the TB and injectors are big enough for you. I have a future project for my wagon, twin turbo's. with TBI.
Thread
Thread Starter
Forum
Replies
Last Post