Trying to locate an $88 definition file
#1
Member
Thread Starter
Join Date: Dec 2003
Location: Vineland, NJ
Posts: 236
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 IROC-Z
Engine: 350 TPI
Transmission: 700R4
Trying to locate an $88 definition file
Does anyone have a working definition file for the $88 Mask?
I had downloaded one from moates, but it didn't seem very complete (no VE tables or anything) and after reading the factory bin, I attempted modifiying it just slightly only to have it not work in the ECM with the moates adapter and both a 27c512 and 27c256 chip (fans would come on at key on, limp mode).
Everything read properly. Nothing had the "off-the-wall" numbers you get when using the wrong definition. I'm wondering if the definition I used is incomplete or has the wrong addressing.
I had downloaded one from moates, but it didn't seem very complete (no VE tables or anything) and after reading the factory bin, I attempted modifiying it just slightly only to have it not work in the ECM with the moates adapter and both a 27c512 and 27c256 chip (fans would come on at key on, limp mode).
Everything read properly. Nothing had the "off-the-wall" numbers you get when using the wrong definition. I'm wondering if the definition I used is incomplete or has the wrong addressing.
#3
Member
Thread Starter
Join Date: Dec 2003
Location: Vineland, NJ
Posts: 236
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 IROC-Z
Engine: 350 TPI
Transmission: 700R4
Re: Trying to locate an $88 definition file
I downloaded that one and it sucks in tunerpro rt.
every other table says "mystery table" and nothing is organized in it.
every other table says "mystery table" and nothing is organized in it.
Thread
Thread Starter
Forum
Replies
Last Post