02-21-2002, 04:30 AM
|
#1 |
| Junior Member
Join Date: Jan 2002 Location: Honolulu, HI
Posts: 37
| How to fix Split BLM values (datalog inside)
This is with an injector constant of 25.8 w/46psi fuel pressure. Idle was bumped up to 600rpm.  I need to adjust my injector constant & fuel pressure but here his my data from the other day.
Im getting quite concerned on the majorly split BLM's at the lower Map range. It seems to be not as split when it hits the 50kpa range. Let me know if you guys notice anything werid. Also any ideal on how to get the BLM back in sync? Thanks!
Datalog (2MB's) | | |
__________________ 93 Z28 w/ ZR28Kit & Fx-5 Suspension, 17" SS rims, LS1 brakes w/braided lines, 1LE Swaybars, slotted rotors, Self-tuned Chip, TransGo, pullies, CC 1.6 non-aligning 7/16 rockers, ported heads, Mezeire waterpump, SLP headers w/2100* PBM coating, 24#SVO injectors, Metco afpr w/fuel rail gage, OverMade4You wire looms & custom wires , LT4 Valve cover,etc....To many to list
Check out my homepage at: My Website
***NEED TO INSTALL***
HOTCAM |
 
|  |
