How to fix Split BLM values (datalog inside)
Thread Starter
Junior Member
Joined: Jan 2002
Posts: 37
Likes: 0
From: Honolulu, HI
How to fix Split BLM values (datalog inside)
This is with an injector constant of 25.8 w/46psi fuel pressure. Idle was bumped up to 600rpm. 
I need to adjust my injector constant & fuel pressure but here his my data from the other day.
Im getting quite concerned on the majorly split BLM's at the lower Map range. It seems to be not as split when it hits the 50kpa range. Let me know if you guys notice anything werid. Also any ideal on how to get the BLM back in sync? Thanks!
Datalog (2MB's)
I need to adjust my injector constant & fuel pressure but here his my data from the other day.Im getting quite concerned on the majorly split BLM's at the lower Map range. It seems to be not as split when it hits the 50kpa range. Let me know if you guys notice anything werid. Also any ideal on how to get the BLM back in sync? Thanks!
Datalog (2MB's)
Thread
Thread Starter
Forum
Replies
Last Post
dbrochard
Engine/Drivetrain/Suspension Parts for Sale
13
Oct 3, 2015 12:43 PM
