Need help, SES light comes on
#1
Member
Thread Starter
Join Date: May 2002
Location: Sioux Falls,SD
Posts: 131
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1985 Z28 Camaro
Engine: 5.0 TPI
Transmission: 700R-4
Axle/Gears: Posi Richmond 3.73
Need help, SES light comes on
I've got a 1989 Trans Am with the 5.0 TBI motor. ever since i bought it, the check engine light comes on after driving 5-10 miles over 45 mph. I put an open element air cleaner on and moved the air temp sensor to the front of the car behind the drivers headlight. I've replaced the baro sensor, knock sensor and air temp sensor. When i check the computer, i get a code 32 and 43. any help is appreciated.
On another problem, my hatch release button doesn't work unless the key is in the off position and the brake light comes on when it is pushed. the release works, but the motor doesn't. Do i need a new motor?
One more thing, my fuel gauge only works from full tank to half tank. Do i need to put in a new pump or just find the right sending unit?
Thanks for any advise given.
On another problem, my hatch release button doesn't work unless the key is in the off position and the brake light comes on when it is pushed. the release works, but the motor doesn't. Do i need a new motor?
One more thing, my fuel gauge only works from full tank to half tank. Do i need to put in a new pump or just find the right sending unit?
Thanks for any advise given.
#2
Senior Member
Join Date: Oct 2004
Location: Smithfield, NC
Posts: 575
Likes: 0
Received 1 Like
on
1 Post
Car: 1987 Camaro SC
Engine: 2.8L MPFI (rebuilt)
Transmission: 700R4 swapped to T5
Axle/Gears: 3.42 open
Re: Need help, SES light comes on
Originally posted by ace16a
On another problem, my hatch release button doesn't work unless the key is in the off position and the brake light comes on when it is pushed. the release works, but the motor doesn't. Do i need a new motor?
On another problem, my hatch release button doesn't work unless the key is in the off position and the brake light comes on when it is pushed. the release works, but the motor doesn't. Do i need a new motor?
There are several things that could be wrong with the pulldown motor assembly. They are notorious for breaking. Hawk's has replacement parts.
#3
Member
Thread Starter
Join Date: May 2002
Location: Sioux Falls,SD
Posts: 131
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1985 Z28 Camaro
Engine: 5.0 TPI
Transmission: 700R-4
Axle/Gears: Posi Richmond 3.73
The switch on the shifter works fine, the car needs to be turned off in order for the release switch on the dash to work.
Thread
Thread Starter
Forum
Replies
Last Post
MikkoV
TPI
2
09-09-2015 04:25 PM
florida_gators
Exterior Parts Wanted
1
09-07-2015 07:19 PM