Dual Coil Connectors
03-07-2005, 11:31 AM
#1
Supreme Member
Thread Starter
iTrader: (1)
Join Date: Apr 2004
Location: Browns Town
Posts: 3,178
Likes: 0
Received 3 Likes
on
3 Posts
Car: 86 Monte SS (730,$8D,G3,AP,4K,S_V4)
Engine: 406 Hyd Roller 236/242
Transmission: 700R4 HomeBrew, 2.4K stall
Axle/Gears: 3:73 Posi, 7.5 Soon to break
Dual Coil Connectors
I'm trying to build an adapter harness without butchering the stock ignition.
I found a listing in a DIY-EFI doc that has part numbers but does not say who's numbers.
"Coil connectors
The remote coil HEI (small cap) has two low voltage connectors. The black one has the tach signal, the grey one has the large power lead.
Black: S-563
Grey: S-562 "
Does anyone know the part number or where to buy the two connectiors for the remote dual connector coil?
(With or without pigtails)
I also need to confirm the two pin connector going to the dizzy.
This is an 8 pin module (C and +) are the pins from the coil.
I found that it might be GM p/n 15306195.
TIA,
JP
I found a listing in a DIY-EFI doc that has part numbers but does not say who's numbers.
"Coil connectors
The remote coil HEI (small cap) has two low voltage connectors. The black one has the tach signal, the grey one has the large power lead.
Black: S-563
Grey: S-562 "
Does anyone know the part number or where to buy the two connectiors for the remote dual connector coil?
(With or without pigtails)
I also need to confirm the two pin connector going to the dizzy.
This is an 8 pin module (C and +) are the pins from the coil.
I found that it might be GM p/n 15306195.
TIA,
JP
03-07-2005, 12:44 PM
#2
TGO Supporter
Join Date: Sep 2003
Location: conway, s.c.
Posts: 6,127
Likes: 0
Received 8 Likes
on
8 Posts
Car: 1989 Iroc-Z
Engine: 5.7L TPI
Transmission: 700R4
GM doesn't sell the individual connectors anymore or at least that is what I have been told by my local dealership. They do have pigtails that you might be able to get. If that fails, your best recourse is to go to a junk yard and get some there.
03-07-2005, 09:25 PM
#4
Supreme Member
Thread Starter
iTrader: (1)
Join Date: Apr 2004
Location: Browns Town
Posts: 3,178
Likes: 0
Received 3 Likes
on
3 Posts
Car: 86 Monte SS (730,$8D,G3,AP,4K,S_V4)
Engine: 406 Hyd Roller 236/242
Transmission: 700R4 HomeBrew, 2.4K stall
Axle/Gears: 3:73 Posi, 7.5 Soon to break
Thanks,
I found a place that makes them called "Car-Pak" in Michigan and "PICO" in Canada but can't find any distributor information on either of them.
The catalogs have anything you could want as far as pigtail replacement connectors.
If I find souces I'll post them up for others to use.
Jp
edit: Found info on this page (see section 9, lots of goodies)
http://www.autobodysupplies.com/
I called Car-Pak and asked for distributor, he said this place is the only one hosting the catalogs.
Waiting for quote back on cost/delivery from e-mail.
The catalogs have anything you could want as far as pigtail replacement connectors.
If I find souces I'll post them up for others to use.
Jp
edit: Found info on this page (see section 9, lots of goodies)
http://www.autobodysupplies.com/
I called Car-Pak and asked for distributor, he said this place is the only one hosting the catalogs.
Waiting for quote back on cost/delivery from e-mail.
Last edited by JP86SS; 03-08-2005 at 09:42 PM.
Thread
Thread Starter
Forum
Replies
Last Post
