| another wiring question!!
alright guyz another question about my tpi harness. car is a 91 camaro RS originally tbi. all thats out and just got my tpi harness. it has slight differences and i just have some questions. sry if their dumb but im no electrical whiz im gunna put up some pics to explain my questions.
ok on my tbi setup all wires that were power came to this thing right here on the pass. side right in front of the battery.
Ok heres a pic of some more wires that connected to this power thing up here from my tbi setup. i know its kinda hard to see but the wires going to the fuse are orange and red.
Now on my tpi harness (pic below) theres some similar power wires with a fuse just like this one on top but theyre on the driver side and have a connector thingy haha told u i was no electrical whiz (i already figured out that the car this harness came out of had battery on driver side and purge canister on pass. which is opposite of what i have). my question is are these wires power for the harness or do they plug into something?? if they are power can i just cut the switch and splice the orange and red wire to some more wire to reach my power source on pass side. o and is the orange wire power?? help me out guyz the mechanical part of this swap is easy but the wiring is a lil confusin  any help is much appreciated.
 | | |
Last edited by robscamaro91; 08-25-2009 at 05:28 AM.
| 
