HELP! Ignition Control Mod Wiring!
06-04-2014, 11:10 AM
#1
Junior Member
Thread Starter
Join Date: May 2014
Location: Las Vegas
Posts: 54
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1985 Trans Am
Engine: 305 TPI
Transmission: 700r4
Axle/Gears: 9 bolt Borg Warner Posi 3.27
HELP! Ignition Control Mod Wiring!
HELP!
The ICM pins are labeled B-R-E-N-P... what is the color of the wires that correspond to the pins!
I have the manual and it labels the pins a A-B-C-D!!
there's a brown-black stripe, Purple with white, White, Green and ?yellow?
I would greatly appreciate it!!!
The ICM pins are labeled B-R-E-N-P... what is the color of the wires that correspond to the pins!
I have the manual and it labels the pins a A-B-C-D!!
there's a brown-black stripe, Purple with white, White, Green and ?yellow?
I would greatly appreciate it!!!
06-05-2014, 07:32 AM
#2
Junior Member
Thread Starter
Join Date: May 2014
Location: Las Vegas
Posts: 54
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1985 Trans Am
Engine: 305 TPI
Transmission: 700r4
Axle/Gears: 9 bolt Borg Warner Posi 3.27
Re: HELP! Ignition Control Mod Wiring!
Well...
After researching I found these diagrams... Hope it helps anybody.
http://3.bp.blogspot.com/-Huj3_ztl5U...7+ignition.jpg
I believe green wire goes to P and white goes to N
Good luck!
After researching I found these diagrams... Hope it helps anybody.
http://3.bp.blogspot.com/-Huj3_ztl5U...7+ignition.jpg
I believe green wire goes to P and white goes to N
Good luck!
Thread
Thread Starter
Forum
Replies
Last Post
Ghettobird52
Tech / General Engine
15
12-29-2023 08:23 AM
eightsixseven
Tech / General Engine
1
08-14-2015 03:09 PM