TPI, TBI, Engine parts, ECM's, Interior Parts

Thread Tools
 
Search this Thread
 
Old 07-08-2006, 08:59 PM
  #1  
Member
Thread Starter
 
cheese_kake's Avatar
 
Join Date: Jul 2005
Location: Jacksonville, Florida
Posts: 460
Likes: 0
Received 0 Likes on 0 Posts
Car: 1992 Camaro Z28
Engine: 5.7 LT1
Transmission: 4L60
Axle/Gears: 3.23's
TPI, TBI, Engine parts, ECM's, Interior Parts

All these parts have pictures and are in excellent condition, some of these parts I have more than one of contact me and let me know which ones you are interested in.

-Power Steering pump and resevoir for 350TPI
-Oil pan for 350TPI
-Valve Covers centerbolt for TPI
-A/C compressor for 92" TPI
-Rebuilt water pump
- Y-shape air cleaner for speed density TPI
-Firebird aircleaner elbows
-Misc. Firebird and Camaro air cleaner assemblys
-ECM's for TBI and TPI. 305's and 350's
-Many A/C vents , perfect condition NOT CRACKED, swivel and vents work perfect.
-MAP Sensors
-IAC valves
-Door Power lock switches Great condition and work
-Pop-up motor for Firebird lights
-TBI injectors
.2 Sets of 55lb injectors
.1 Set of 80lb injectors
.1 Set of 65lb injectors

-Cloth Seats for Firbird or Camaro

- 85-92 Z28/IROC Grid Tailights MINT !!! PERFECT!!



CAN GET PARS ON REQUEST, I HAVE ACCESS TO OVER 25 THIRDGENS, AND OTHER 80's AND LATE 90's CAPRICES, MONTE CARLO, ETC.

Last edited by cheese_kake; 07-09-2006 at 01:01 PM.
Old 07-08-2006, 09:13 PM
  #2  
Supreme Member

iTrader: (4)
 
87zjeff's Avatar
 
Join Date: Aug 2005
Location: louisville, ky
Posts: 1,366
Likes: 0
Received 0 Likes on 0 Posts
Axle/Gears: '01 3.42 10 bolt
can you get me a knock sensor, oil pressure sender/switch, and map sensor for a '90-'92 350 tpi? how much for all to 40229
Old 07-08-2006, 09:23 PM
  #3  
Member
Thread Starter
 
cheese_kake's Avatar
 
Join Date: Jul 2005
Location: Jacksonville, Florida
Posts: 460
Likes: 0
Received 0 Likes on 0 Posts
Car: 1992 Camaro Z28
Engine: 5.7 LT1
Transmission: 4L60
Axle/Gears: 3.23's
I can definately get you the Oil pressure sending switch, I'll have to take a look and see if I have a good MAP sensor. For both I would do $60 shipped to your house. For just the Oil pressure switch $20 shipped.
Old 07-08-2006, 09:25 PM
  #4  
Supreme Member

iTrader: (4)
 
87zjeff's Avatar
 
Join Date: Aug 2005
Location: louisville, ky
Posts: 1,366
Likes: 0
Received 0 Likes on 0 Posts
Axle/Gears: '01 3.42 10 bolt
o'reilly's has the pressure switch for $15
Old 07-08-2006, 09:27 PM
  #5  
Member
Thread Starter
 
cheese_kake's Avatar
 
Join Date: Jul 2005
Location: Jacksonville, Florida
Posts: 460
Likes: 0
Received 0 Likes on 0 Posts
Car: 1992 Camaro Z28
Engine: 5.7 LT1
Transmission: 4L60
Axle/Gears: 3.23's
You got me alright $40 shipped everything. $5 shippped for the sending switch. LoL I wasnt trying to cheat you I was just thinking off the top of my head, I think I paid $20 for mine a year ago.
Old 07-08-2006, 09:28 PM
  #6  
Supreme Member

iTrader: (4)
 
87zjeff's Avatar
 
Join Date: Aug 2005
Location: louisville, ky
Posts: 1,366
Likes: 0
Received 0 Likes on 0 Posts
Axle/Gears: '01 3.42 10 bolt
what about a knock sensor?
Old 07-08-2006, 09:29 PM
  #7  
Member
Thread Starter
 
cheese_kake's Avatar
 
Join Date: Jul 2005
Location: Jacksonville, Florida
Posts: 460
Likes: 0
Received 0 Likes on 0 Posts
Car: 1992 Camaro Z28
Engine: 5.7 LT1
Transmission: 4L60
Axle/Gears: 3.23's
Probobly, Im not sure, If I do $5 shipped aswell.
Old 07-08-2006, 09:35 PM
  #8  
Member
Thread Starter
 
cheese_kake's Avatar
 
Join Date: Jul 2005
Location: Jacksonville, Florida
Posts: 460
Likes: 0
Received 0 Likes on 0 Posts
Car: 1992 Camaro Z28
Engine: 5.7 LT1
Transmission: 4L60
Axle/Gears: 3.23's
Ok I just checked in the back, I got the MAP sensor its in great condition, I have the oil sending unit, and I also have a Idle Air Control valve. I will have to see tommorrow about the knock sensor.
Old 07-08-2006, 09:35 PM
  #9  
Supreme Member

iTrader: (4)
 
87zjeff's Avatar
 
Join Date: Aug 2005
Location: louisville, ky
Posts: 1,366
Likes: 0
Received 0 Likes on 0 Posts
Axle/Gears: '01 3.42 10 bolt
do me a favor, see if you have the knock sensor for a 350, '90-'92 on all this and i'll give you $50 shipped for all three peices. i don't need the idle air control valve.
Old 07-08-2006, 09:39 PM
  #10  
Member
Thread Starter
 
cheese_kake's Avatar
 
Join Date: Jul 2005
Location: Jacksonville, Florida
Posts: 460
Likes: 0
Received 0 Likes on 0 Posts
Car: 1992 Camaro Z28
Engine: 5.7 LT1
Transmission: 4L60
Axle/Gears: 3.23's
Ok that sounds great, first thing tommorrow Im going to my other shop to see if I have any. Im almost positive we do, we bought a couple extra for our last project. I'll let you know tommorrow at the latest of 5 o'clock.
Old 07-08-2006, 09:41 PM
  #11  
Supreme Member

iTrader: (4)
 
87zjeff's Avatar
 
Join Date: Aug 2005
Location: louisville, ky
Posts: 1,366
Likes: 0
Received 0 Likes on 0 Posts
Axle/Gears: '01 3.42 10 bolt
ok...sounds good. these will help my project out as well. it sucks that they changed them in '90 as i have one for the earlier tpi units.
Old 07-08-2006, 09:46 PM
  #12  
Member
Thread Starter
 
cheese_kake's Avatar
 
Join Date: Jul 2005
Location: Jacksonville, Florida
Posts: 460
Likes: 0
Received 0 Likes on 0 Posts
Car: 1992 Camaro Z28
Engine: 5.7 LT1
Transmission: 4L60
Axle/Gears: 3.23's
Ya man I know what its like to piece together a project, but you gotta remember its all worth it once its done.
Old 07-08-2006, 09:46 PM
  #13  
Supreme Member

iTrader: (4)
 
87zjeff's Avatar
 
Join Date: Aug 2005
Location: louisville, ky
Posts: 1,366
Likes: 0
Received 0 Likes on 0 Posts
Axle/Gears: '01 3.42 10 bolt
lol..yeah..that's true.
Old 07-08-2006, 10:11 PM
  #14  
Junior Member
 
nathan96's Avatar
 
Join Date: Feb 2006
Location: Columbus
Posts: 42
Likes: 0
Received 0 Likes on 0 Posts
Car: 1990 Camaro
Engine: 3.1L
Transmission: 700R4
what about a TPI wiring harness? I am looking for one.
Old 07-08-2006, 10:55 PM
  #15  
Member
Thread Starter
 
cheese_kake's Avatar
 
Join Date: Jul 2005
Location: Jacksonville, Florida
Posts: 460
Likes: 0
Received 0 Likes on 0 Posts
Car: 1992 Camaro Z28
Engine: 5.7 LT1
Transmission: 4L60
Axle/Gears: 3.23's
Are you doing a TPI swap ? I think I have one, but I'll have to check for it at my other shop tommorrow when I get the knock sensor for 87zjeff, if I have one I would like get $100 shipped, and it will include most sensors. I can also get the ECM for extra if you need it.
Old 07-09-2006, 08:47 AM
  #16  
Junior Member
 
nathan96's Avatar
 
Join Date: Feb 2006
Location: Columbus
Posts: 42
Likes: 0
Received 0 Likes on 0 Posts
Car: 1990 Camaro
Engine: 3.1L
Transmission: 700R4
I have the ECM and a 350 TPI motor but the harness is really *&^#ed up. Would you be able to cut me a deal if I don't need the sensors?
Old 07-09-2006, 08:48 AM
  #17  
Member
Thread Starter
 
cheese_kake's Avatar
 
Join Date: Jul 2005
Location: Jacksonville, Florida
Posts: 460
Likes: 0
Received 0 Likes on 0 Posts
Car: 1992 Camaro Z28
Engine: 5.7 LT1
Transmission: 4L60
Axle/Gears: 3.23's
tt
----------
nathan, yea I could prob get you just the harness for $75 shipped.

Last edited by cheese_kake; 07-09-2006 at 08:52 AM. Reason: Automerged Doublepost
Old 07-09-2006, 11:43 AM
  #18  
Supreme Member

 
thomas1976's Avatar
 
Join Date: Jun 2006
Location: West-Central
Posts: 2,199
Likes: 0
Received 1 Like on 1 Post
Car: 91 Trans am
Engine: built 360 TBI
Transmission: built 700r4
Axle/Gears: 10bolt/3.23
Hi, could you find left+right front park-turn lights with bulb sockets for 91firebird?
Old 07-09-2006, 12:20 PM
  #19  
Member
Thread Starter
 
cheese_kake's Avatar
 
Join Date: Jul 2005
Location: Jacksonville, Florida
Posts: 460
Likes: 0
Received 0 Likes on 0 Posts
Car: 1992 Camaro Z28
Engine: 5.7 LT1
Transmission: 4L60
Axle/Gears: 3.23's
The ones on the fender or the ones next to the pop-up lights ?
Old 07-09-2006, 12:46 PM
  #20  
Member
Thread Starter
 
cheese_kake's Avatar
 
Join Date: Jul 2005
Location: Jacksonville, Florida
Posts: 460
Likes: 0
Received 0 Likes on 0 Posts
Car: 1992 Camaro Z28
Engine: 5.7 LT1
Transmission: 4L60
Axle/Gears: 3.23's
87zjeff, I got the Knock Sensor. SO the oil sending switch, knock sensor, and MAP sensor for $50 shipped. I accept Paypal.
Old 07-09-2006, 12:48 PM
  #21  
Supreme Member

iTrader: (4)
 
87zjeff's Avatar
 
Join Date: Aug 2005
Location: louisville, ky
Posts: 1,366
Likes: 0
Received 0 Likes on 0 Posts
Axle/Gears: '01 3.42 10 bolt
kool....pm me your info and i will get it out to you right away.
Old 07-09-2006, 02:29 PM
  #22  
Member
Thread Starter
 
cheese_kake's Avatar
 
Join Date: Jul 2005
Location: Jacksonville, Florida
Posts: 460
Likes: 0
Received 0 Likes on 0 Posts
Car: 1992 Camaro Z28
Engine: 5.7 LT1
Transmission: 4L60
Axle/Gears: 3.23's
tt
Old 07-11-2006, 01:32 PM
  #23  
Junior Member
 
jeepmanjeff's Avatar
 
Join Date: Jul 2006
Posts: 18
Likes: 0
Received 0 Likes on 0 Posts
I need a TBI for a 350 complete THROTTLE BODY ONLY....do you have one and how much to 45014?
Old 07-11-2006, 05:27 PM
  #24  
Member
Thread Starter
 
cheese_kake's Avatar
 
Join Date: Jul 2005
Location: Jacksonville, Florida
Posts: 460
Likes: 0
Received 0 Likes on 0 Posts
Car: 1992 Camaro Z28
Engine: 5.7 LT1
Transmission: 4L60
Axle/Gears: 3.23's
Im about 99% sure I got one off an ex-cop car caprice, is there anything different besides the injectors from the TBI 305 and TBI 350, if so let me know so I can tell for sure when I take a look. So you do not need the injectors ? $55 shipped.
Old 07-11-2006, 05:37 PM
  #25  
Member
 
Millerboy's Avatar
 
Join Date: May 2006
Location: Minnesota
Posts: 102
Likes: 0
Received 0 Likes on 0 Posts
Car: 1984 camaro z28
Engine: 305, soon to be a 350
What color are the seats and in what condition? How much shipped to 55433?
Old 07-11-2006, 07:41 PM
  #26  
Member
Thread Starter
 
cheese_kake's Avatar
 
Join Date: Jul 2005
Location: Jacksonville, Florida
Posts: 460
Likes: 0
Received 0 Likes on 0 Posts
Car: 1992 Camaro Z28
Engine: 5.7 LT1
Transmission: 4L60
Axle/Gears: 3.23's
I just looked at the seats today and they are not in the best condition, so if you want, you can wait till I get some better ones in.
Old 07-11-2006, 07:52 PM
  #27  
Member
 
Millerboy's Avatar
 
Join Date: May 2006
Location: Minnesota
Posts: 102
Likes: 0
Received 0 Likes on 0 Posts
Car: 1984 camaro z28
Engine: 305, soon to be a 350
When is that likely to be. I am looking basically for blackor black and grey, or charcoal.
Old 07-11-2006, 08:30 PM
  #28  
TGO Supporter/Moderator

iTrader: (12)
 
anesthes's Avatar
 
Join Date: Jul 1999
Location: SALEM, NH
Posts: 11,731
Likes: 0
Received 89 Likes on 75 Posts
Car: '88 Formula, '94 Corvette, '95 Bird
Engine: LC9, 355" LT1, LT1
Transmission: T5, Zf6, 4L60E
Axle/Gears: 3.42, Dana44 3.45, 3.23
Originally Posted by cheese_kake
All these parts have pictures and are in excellent condition, some of these parts I have more than one of contact me and let me know which ones you are interested in.

-Power Steering pump and resevoir for 350TPI
-Oil pan for 350TPI
-Valve Covers centerbolt for TPI
-A/C compressor for 92" TPI
-Rebuilt water pump
- Y-shape air cleaner for speed density TPI
-Firebird aircleaner elbows
-Misc. Firebird and Camaro air cleaner assemblys
-ECM's for TBI and TPI. 305's and 350's
-Many A/C vents , perfect condition NOT CRACKED, swivel and vents work perfect.
-MAP Sensors
-IAC valves
-Door Power lock switches Great condition and work
-Pop-up motor for Firebird lights
-TBI injectors
.2 Sets of 55lb injectors
.1 Set of 80lb injectors
.1 Set of 65lb injectors

-Cloth Seats for Firbird or Camaro

- 85-92 Z28/IROC Grid Tailights MINT !!! PERFECT!!



CAN GET PARS ON REQUEST, I HAVE ACCESS TO OVER 25 THIRDGENS, AND OTHER 80's AND LATE 90's CAPRICES, MONTE CARLO, ETC.

Do you have the TPI speed density rubber intake boot? if so how long is it? I need something for my car.

-- Joe
Old 07-11-2006, 08:55 PM
  #29  
Member
 
camaroracer016's Avatar
 
Join Date: Jan 2005
Location: Akron,Oh
Posts: 180
Likes: 0
Received 0 Likes on 0 Posts
Car: 88 Camaro
Engine: 5.3
Transmission: TH350
how about the grid taillights? with shipping to 44305?
Old 07-11-2006, 09:29 PM
  #30  
Junior Member
 
jeepmanjeff's Avatar
 
Join Date: Jul 2006
Posts: 18
Likes: 0
Received 0 Likes on 0 Posts
I need the COMPLETE assembly with injectors for a 350. The throttle bodys are the same...injectors are different
Old 07-11-2006, 09:50 PM
  #31  
Member
Thread Starter
 
cheese_kake's Avatar
 
Join Date: Jul 2005
Location: Jacksonville, Florida
Posts: 460
Likes: 0
Received 0 Likes on 0 Posts
Car: 1992 Camaro Z28
Engine: 5.7 LT1
Transmission: 4L60
Axle/Gears: 3.23's
anesthes, right now I have a Y-shape aircleaner without the speed density rubber boot, but I have the rubber boot that I might use on my LT1 swap, we havent built the air cleaner setup yet but if I dont use it I will sell it for $10 shipped. I'll get back to you if you havent found one yet, once I know.
----------
camaro016, I would do $145 shipped. Again they are mint, if you buy, I would ship them priority the next day after payment, and I will also purchase a tracking number.

----------
Jeepmanjeff, Iam almost 100% positive I have the correct injectors also if you give me till thursday afternoon at the very lattest I can tell you for sure, again Iam almost positive I do.

Last edited by cheese_kake; 07-11-2006 at 09:57 PM. Reason: Automerged Doublepost
Old 07-11-2006, 09:53 PM
  #32  
Member
 
camaroracer016's Avatar
 
Join Date: Jan 2005
Location: Akron,Oh
Posts: 180
Likes: 0
Received 0 Likes on 0 Posts
Car: 88 Camaro
Engine: 5.3
Transmission: TH350
What about the taillights?
Old 07-11-2006, 09:58 PM
  #33  
Member
Thread Starter
 
cheese_kake's Avatar
 
Join Date: Jul 2005
Location: Jacksonville, Florida
Posts: 460
Likes: 0
Received 0 Likes on 0 Posts
Car: 1992 Camaro Z28
Engine: 5.7 LT1
Transmission: 4L60
Axle/Gears: 3.23's
Check the thread again ^^^
Old 07-11-2006, 10:07 PM
  #34  
Member
 
camaroracer016's Avatar
 
Join Date: Jan 2005
Location: Akron,Oh
Posts: 180
Likes: 0
Received 0 Likes on 0 Posts
Car: 88 Camaro
Engine: 5.3
Transmission: TH350
do you know if they would fit an 84? where are you located? i may be able to come pickup. I also need a dirver door in decent shape.
Old 07-11-2006, 10:29 PM
  #35  
Member
Thread Starter
 
cheese_kake's Avatar
 
Join Date: Jul 2005
Location: Jacksonville, Florida
Posts: 460
Likes: 0
Received 0 Likes on 0 Posts
Car: 1992 Camaro Z28
Engine: 5.7 LT1
Transmission: 4L60
Axle/Gears: 3.23's
Iam located in Jacksonville Florida, more precisely Green Cove Springs. If you come to pick it up I would be more than willing to meet you somewhere closer to halfway if its long drive for you. Yes the tailights would fit your car.

Yes I have a door, if you come to pick that up, it would make it much easier. The cost to ship a whole door would be outrageous.
Old 07-12-2006, 05:49 AM
  #36  
Member
Thread Starter
 
cheese_kake's Avatar
 
Join Date: Jul 2005
Location: Jacksonville, Florida
Posts: 460
Likes: 0
Received 0 Likes on 0 Posts
Car: 1992 Camaro Z28
Engine: 5.7 LT1
Transmission: 4L60
Axle/Gears: 3.23's
tt
Old 07-12-2006, 10:21 PM
  #37  
Member
Thread Starter
 
cheese_kake's Avatar
 
Join Date: Jul 2005
Location: Jacksonville, Florida
Posts: 460
Likes: 0
Received 0 Likes on 0 Posts
Car: 1992 Camaro Z28
Engine: 5.7 LT1
Transmission: 4L60
Axle/Gears: 3.23's
tt
Old 07-13-2006, 10:00 AM
  #38  
Member
iTrader: (10)
 
Duts87ss's Avatar
 
Join Date: Aug 2005
Location: Ocean Springs, MS
Posts: 418
Likes: 0
Received 0 Likes on 0 Posts
Car: 1987 Monte Carlo SS
Engine: HSR 383 AFR180/268XFI EBL
Transmission: 200-4R, Edge 2800 L/U
Axle/Gears: 7.5/3.73/PowerTrax No-Slip
Any chance you've got a TPI EGR solenoid with it's related plumbing?
Old 07-13-2006, 04:19 PM
  #39  
Member
Thread Starter
 
cheese_kake's Avatar
 
Join Date: Jul 2005
Location: Jacksonville, Florida
Posts: 460
Likes: 0
Received 0 Likes on 0 Posts
Car: 1992 Camaro Z28
Engine: 5.7 LT1
Transmission: 4L60
Axle/Gears: 3.23's
LoL I was just going through my stuff today and found a brand new one. YES I got one !!! It goes for 25.99 brand new at the parts store. Mine is brand new NEVER USED. I'll sell it for $20. shipped to your house. PM me with your info if you want to buy.
Old 07-13-2006, 04:27 PM
  #40  
Member
iTrader: (10)
 
Duts87ss's Avatar
 
Join Date: Aug 2005
Location: Ocean Springs, MS
Posts: 418
Likes: 0
Received 0 Likes on 0 Posts
Car: 1987 Monte Carlo SS
Engine: HSR 383 AFR180/268XFI EBL
Transmission: 200-4R, Edge 2800 L/U
Axle/Gears: 7.5/3.73/PowerTrax No-Slip
Do you also have the lines that go from the solenoid to the EGR valve and the TB? If so, we've got a deal.
Old 07-13-2006, 04:31 PM
  #41  
Supreme Member

iTrader: (11)
 
89formula350b2l's Avatar
 
Join Date: Apr 2006
Location: Jacksonville, NC
Posts: 1,519
Received 1 Like on 1 Post
Car: 92 Camaro
Engine: Dart SHP 406 HSR, LE heads
Transmission: Performabuilt Level 2, Vig 3200
Axle/Gears: S60 373
how much for firebird rear seats shipped to 22554? ty
Old 07-13-2006, 04:47 PM
  #42  
Member
Thread Starter
 
cheese_kake's Avatar
 
Join Date: Jul 2005
Location: Jacksonville, Florida
Posts: 460
Likes: 0
Received 0 Likes on 0 Posts
Car: 1992 Camaro Z28
Engine: 5.7 LT1
Transmission: 4L60
Axle/Gears: 3.23's
Yes it has all the vac lines and appropriate rubber boots. If your ready to do business send payment to my paypal.

the email is:

tripizlu@yahoo.com
----------
Originally Posted by 89formula350b2l
how much for firebird rear seats shipped to 22554? ty
I have firebird seats in various colors and condition. Pickup is almost required with the weight and size of these. I would need to have the cost for shipping and then $100 - $250 depending on condition and model ex. (GTA, Leather etc.)

Last edited by cheese_kake; 07-13-2006 at 04:50 PM. Reason: Automerged Doublepost
Old 07-13-2006, 04:57 PM
  #43  
Member
Thread Starter
 
cheese_kake's Avatar
 
Join Date: Jul 2005
Location: Jacksonville, Florida
Posts: 460
Likes: 0
Received 0 Likes on 0 Posts
Car: 1992 Camaro Z28
Engine: 5.7 LT1
Transmission: 4L60
Axle/Gears: 3.23's
Originally Posted by jeepmanjeff
I need the COMPLETE assembly with injectors for a 350. The throttle bodys are the same...injectors are different
Are you still interested ?
Old 07-13-2006, 05:00 PM
  #44  
Member
iTrader: (10)
 
Duts87ss's Avatar
 
Join Date: Aug 2005
Location: Ocean Springs, MS
Posts: 418
Likes: 0
Received 0 Likes on 0 Posts
Car: 1987 Monte Carlo SS
Engine: HSR 383 AFR180/268XFI EBL
Transmission: 200-4R, Edge 2800 L/U
Axle/Gears: 7.5/3.73/PowerTrax No-Slip
Philip, Paypal has been sent. Thanks.
Old 07-13-2006, 05:20 PM
  #45  
Member
Thread Starter
 
cheese_kake's Avatar
 
Join Date: Jul 2005
Location: Jacksonville, Florida
Posts: 460
Likes: 0
Received 0 Likes on 0 Posts
Car: 1992 Camaro Z28
Engine: 5.7 LT1
Transmission: 4L60
Axle/Gears: 3.23's
payment is pending as of right now, as soon as it clears I will ship.
Old 07-13-2006, 05:58 PM
  #46  
Member
Thread Starter
 
cheese_kake's Avatar
 
Join Date: Jul 2005
Location: Jacksonville, Florida
Posts: 460
Likes: 0
Received 0 Likes on 0 Posts
Car: 1992 Camaro Z28
Engine: 5.7 LT1
Transmission: 4L60
Axle/Gears: 3.23's
Payment cleared, I will be shipping it tommorrow morning.
Old 07-13-2006, 09:07 PM
  #47  
Member
iTrader: (10)
 
Duts87ss's Avatar
 
Join Date: Aug 2005
Location: Ocean Springs, MS
Posts: 418
Likes: 0
Received 0 Likes on 0 Posts
Car: 1987 Monte Carlo SS
Engine: HSR 383 AFR180/268XFI EBL
Transmission: 200-4R, Edge 2800 L/U
Axle/Gears: 7.5/3.73/PowerTrax No-Slip
Originally Posted by cheese_kake
Payment cleared, I will be shipping it tommorrow morning.
Excellent!!!
Old 07-13-2006, 09:29 PM
  #48  
Member
Thread Starter
 
cheese_kake's Avatar
 
Join Date: Jul 2005
Location: Jacksonville, Florida
Posts: 460
Likes: 0
Received 0 Likes on 0 Posts
Car: 1992 Camaro Z28
Engine: 5.7 LT1
Transmission: 4L60
Axle/Gears: 3.23's
Happy to do business with you
Old 07-19-2006, 01:33 PM
  #49  
Member
iTrader: (10)
 
Duts87ss's Avatar
 
Join Date: Aug 2005
Location: Ocean Springs, MS
Posts: 418
Likes: 0
Received 0 Likes on 0 Posts
Car: 1987 Monte Carlo SS
Engine: HSR 383 AFR180/268XFI EBL
Transmission: 200-4R, Edge 2800 L/U
Axle/Gears: 7.5/3.73/PowerTrax No-Slip
Did you get the solenoid and lines shipped Friday?
Old 07-20-2006, 09:44 AM
  #50  
Member
iTrader: (10)
 
Duts87ss's Avatar
 
Join Date: Aug 2005
Location: Ocean Springs, MS
Posts: 418
Likes: 0
Received 0 Likes on 0 Posts
Car: 1987 Monte Carlo SS
Engine: HSR 383 AFR180/268XFI EBL
Transmission: 200-4R, Edge 2800 L/U
Axle/Gears: 7.5/3.73/PowerTrax No-Slip
Anyone else heard from cheese_kake?

I plan to finish my TPI swap soon and am going to need that EGR solenoid and lines.


Quick Reply: TPI, TBI, Engine parts, ECM's, Interior Parts



All times are GMT -5. The time now is 08:41 PM.