Parting 85 Z-28 with ALOT of mods?
#1
Senior Member
Thread Starter
Join Date: Nov 2003
Location: Plattsburgh NY
Posts: 967
Likes: 0
Received 0 Likes
on
0 Posts
Car: 85 Camaro Z-28
Engine: 6.6
Transmission: 5-speed
Parting 85 Z-28 with ALOT of mods?
Depending on how much interest i get in parts i am going to part out my camaro unless someone is interested in the whole thing. here are some of the parts that are on the car:
1985 Z-28
406 SBC
Edelbrock heads stamped steel 1.6 rockers
hardened pushrods
Crane Retro-fit roller cam 509/528 222/230
fully rebuilt bottom end arp bolts
Edelbrock RPM air gap intake(10 miles)
Holley 850 Double pumper(10 miles) w/holley brushed alum fuel line.
Holley throttle bracket.
Mallory Adjustable fuel pressure regulator
Earls Fittings
Full mallory ignition(distributor, coil, resistor, voltage spike protector, rev limiter)
RP black powdercoated wire looms
Brand new Mallory sidewinder wires(10miles)
accell u Gruve header plugs.
Earls Header gaskets with replacement centers(have replacements)
stock electric in-tank pump.
Griffin Aluminum Radiator
Dual Fans
SLP 1 3/4 no air headers-y pipe
Catco Cat
3'' catback Flowmaster exhaust 3'' in dual 3'' out (all welded)
T-56 from 94 Z-28
Pro 5.0
Centerforce balanced flywheel 10-15 miles
Spec Stage 3 clutch 10-15 miles
brand new from GM hydraulics
spohn crossmember
9 bolt posi disc rear end
3.70 gears
17x8 TT2's
245/45/17 khumo escta 712 front tires
245/45/17 rears
RA2 hood
Most of the interior peices are in very good condition. check out the pics if you would like.
Pics are here:
https://www.thirdgen.org/forums/cama...ht=tpimarow6.6
1985 Z-28
406 SBC
Edelbrock heads stamped steel 1.6 rockers
hardened pushrods
Crane Retro-fit roller cam 509/528 222/230
fully rebuilt bottom end arp bolts
Edelbrock RPM air gap intake(10 miles)
Holley 850 Double pumper(10 miles) w/holley brushed alum fuel line.
Holley throttle bracket.
Mallory Adjustable fuel pressure regulator
Earls Fittings
Full mallory ignition(distributor, coil, resistor, voltage spike protector, rev limiter)
RP black powdercoated wire looms
Brand new Mallory sidewinder wires(10miles)
accell u Gruve header plugs.
Earls Header gaskets with replacement centers(have replacements)
stock electric in-tank pump.
Griffin Aluminum Radiator
Dual Fans
SLP 1 3/4 no air headers-y pipe
Catco Cat
3'' catback Flowmaster exhaust 3'' in dual 3'' out (all welded)
T-56 from 94 Z-28
Pro 5.0
Centerforce balanced flywheel 10-15 miles
Spec Stage 3 clutch 10-15 miles
brand new from GM hydraulics
spohn crossmember
9 bolt posi disc rear end
3.70 gears
17x8 TT2's
245/45/17 khumo escta 712 front tires
245/45/17 rears
RA2 hood
Most of the interior peices are in very good condition. check out the pics if you would like.
Pics are here:
https://www.thirdgen.org/forums/cama...ht=tpimarow6.6
#5
Senior Member
Thread Starter
Join Date: Nov 2003
Location: Plattsburgh NY
Posts: 967
Likes: 0
Received 0 Likes
on
0 Posts
Car: 85 Camaro Z-28
Engine: 6.6
Transmission: 5-speed
#7
Senior Member
Thread Starter
Join Date: Nov 2003
Location: Plattsburgh NY
Posts: 967
Likes: 0
Received 0 Likes
on
0 Posts
Car: 85 Camaro Z-28
Engine: 6.6
Transmission: 5-speed
Trending Topics
#8
Senior Member
Thread Starter
Join Date: Nov 2003
Location: Plattsburgh NY
Posts: 967
Likes: 0
Received 0 Likes
on
0 Posts
Car: 85 Camaro Z-28
Engine: 6.6
Transmission: 5-speed
I also take paypal, i have 6,000+feedback on e-bay so i dont want anyone to be afraid to buy anything from me, my user name is Turbomopars. verified over 3,000 transactions through paypal.
#12
Supreme Member
iTrader: (1)
Join Date: Mar 2000
Location: All over China, Iowa, and San Luis Obispo, CA
Posts: 1,692
Likes: 0
Received 1 Like
on
1 Post
Car: 92 Form, 91 Z28, 89 GTA, 86 Z28
Engine: 5.7 TPI, LG4
Transmission: 700R4, 700R4
Axle/Gears: 3.27, 2.73
Got any more info on the shortblock? What compression would I get with 74cc heads and whatever gasket? What rods are in it? Pistons - Hyper's or forged?
Thanks,
Thanks,
#15
Senior Member
Thread Starter
Join Date: Nov 2003
Location: Plattsburgh NY
Posts: 967
Likes: 0
Received 0 Likes
on
0 Posts
Car: 85 Camaro Z-28
Engine: 6.6
Transmission: 5-speed
Shortblock has stock rods that have been resized and equiped with arp bolts, 2 bolt main, crank is .010, hyper pistons, Sealed power rings, comp. ratio with my 70cc heads is 9.6 so with 74cc and stock gaskets it would be aroun 9.3:1ish.
#16
Senior Member
Thread Starter
Join Date: Nov 2003
Location: Plattsburgh NY
Posts: 967
Likes: 0
Received 0 Likes
on
0 Posts
Car: 85 Camaro Z-28
Engine: 6.6
Transmission: 5-speed
#19
Senior Member
Thread Starter
Join Date: Nov 2003
Location: Plattsburgh NY
Posts: 967
Likes: 0
Received 0 Likes
on
0 Posts
Car: 85 Camaro Z-28
Engine: 6.6
Transmission: 5-speed
id like to sell the whole rear end together.if it doesnt sell, $250 for the gears and posi. 850 for the rims and tires.
Rear tires are hankook Ventus 245/45/17
Rear tires are hankook Ventus 245/45/17
#22
Senior Member
Thread Starter
Join Date: Nov 2003
Location: Plattsburgh NY
Posts: 967
Likes: 0
Received 0 Likes
on
0 Posts
Car: 85 Camaro Z-28
Engine: 6.6
Transmission: 5-speed
#27
Member
Join Date: Dec 2005
Location: cocoa beach florida
Posts: 108
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 pontiac firebird formula ws6
Engine: chevy 400 cubic inch V8
Transmission: turbo 350
how much for the body? with interior and radiator and ignition and suspension and bumpers, and lights and bla bla bla all that good stuff? im in fl and is there any rust at all cuz thats what im trying to get rid of, it seems every car i buy is "rust free" except for this spot and this spot and little damage here then i go to fix it and its huge, and currently a hole or 2 or 3. but anyways how much would you want for all that?
#31
Senior Member
Thread Starter
Join Date: Nov 2003
Location: Plattsburgh NY
Posts: 967
Likes: 0
Received 0 Likes
on
0 Posts
Car: 85 Camaro Z-28
Engine: 6.6
Transmission: 5-speed
how much for the body? with interior and radiator and ignition and suspension and bumpers, and lights and bla bla bla all that good stuff? im in fl and is there any rust at all cuz thats what im trying to get rid of, it seems every car i buy is "rust free" except for this spot and this spot and little damage here then i go to fix it and its huge, and currently a hole or 2 or 3. but anyways how much would you want for all that?
#32
Senior Member
Thread Starter
Join Date: Nov 2003
Location: Plattsburgh NY
Posts: 967
Likes: 0
Received 0 Likes
on
0 Posts
Car: 85 Camaro Z-28
Engine: 6.6
Transmission: 5-speed
#34
Member
Join Date: Oct 2005
Location: OKLAHOMA
Posts: 125
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1986 CAMARO
Engine: 434
Transmission: th400 rmvb,nc 4500 stall
Axle/Gears: MOSER 12BOLT,35splineaxels,4.33gear
what kind of bottom end does the 406 have? and how much for the motor minus the heads? how much for the radiator
#35
Member
Join Date: Aug 2005
Location: Milton FL near Pensacola FL
Posts: 277
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1985 Z-28 2003 chevy Silverado Z71
Engine: was 305 LG4 now 355 HO
Transmission: TH700r4
Axle/Gears: posi 373
What for the heads they well fit in a 355 right?Rear end? Shipped to 32566?Front Gfx, spolior and dash pad?
#37
Member
Join Date: Dec 2005
Location: cocoa beach florida
Posts: 108
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 pontiac firebird formula ws6
Engine: chevy 400 cubic inch V8
Transmission: turbo 350
ummm, lets see. rolling chassis??? but with all suspension and i gues i dont need the posi unit, depends how cheap you are willing to let it go, because that means more stuff i need to take off my car which is less i can sell it for
#38
Senior Member
Thread Starter
Join Date: Nov 2003
Location: Plattsburgh NY
Posts: 967
Likes: 0
Received 0 Likes
on
0 Posts
Car: 85 Camaro Z-28
Engine: 6.6
Transmission: 5-speed
Radiator- your 2nd in line for it but im want 140 shipped within the US.
#39
Senior Member
Thread Starter
Join Date: Nov 2003
Location: Plattsburgh NY
Posts: 967
Likes: 0
Received 0 Likes
on
0 Posts
Car: 85 Camaro Z-28
Engine: 6.6
Transmission: 5-speed
rear end 500 shipped to you. its going to cost me probably $200 to ship it.
Front gfx- 70 shipped
spoiler $100 shipped
Dash pad 80 shipped.
#40
Senior Member
Thread Starter
Join Date: Nov 2003
Location: Plattsburgh NY
Posts: 967
Likes: 0
Received 0 Likes
on
0 Posts
Car: 85 Camaro Z-28
Engine: 6.6
Transmission: 5-speed
#41
Senior Member
Thread Starter
Join Date: Nov 2003
Location: Plattsburgh NY
Posts: 967
Likes: 0
Received 0 Likes
on
0 Posts
Car: 85 Camaro Z-28
Engine: 6.6
Transmission: 5-speed
i will sell the car for 1800 with full interior no drivetrain with the posi rear in it, radiator and ignition system also meaning the distributor, hood all body parts but some kind of stock rims ill put on it. ill even throw in 2 sets of slicks 26'' and 28''.
#42
Member
Join Date: Dec 2005
Location: cocoa beach florida
Posts: 108
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 pontiac firebird formula ws6
Engine: chevy 400 cubic inch V8
Transmission: turbo 350
how much shipped to fl? 32931 (cocoa beach) is it ok if i buy it in like the beginning of november or something? i need to get some mo cash
#44
Senior Member
Thread Starter
Join Date: Nov 2003
Location: Plattsburgh NY
Posts: 967
Likes: 0
Received 0 Likes
on
0 Posts
Car: 85 Camaro Z-28
Engine: 6.6
Transmission: 5-speed
70cc chambers 2.02 170cc intake runners 69cc exhaust runners.
i might be able to wait that long but i have had other offers and im not sure if i can wait that long, my father is probably going to lose his house so most of this money is going to go to him and we dont have much longer left. but ill see what i can do someone local wants to buy the whole car but i wont know till saturday.
i might be able to wait that long but i have had other offers and im not sure if i can wait that long, my father is probably going to lose his house so most of this money is going to go to him and we dont have much longer left. but ill see what i can do someone local wants to buy the whole car but i wont know till saturday.
#47
Junior Member
Join Date: Jun 2004
Location: El Paso TX
Posts: 74
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1982 Z28
Engine: 350
Transmission: 700-R4
#48
Senior Member
Thread Starter
Join Date: Nov 2003
Location: Plattsburgh NY
Posts: 967
Likes: 0
Received 0 Likes
on
0 Posts
Car: 85 Camaro Z-28
Engine: 6.6
Transmission: 5-speed
89 ho RS- you are 4th inline for the radiator if 400ci87firebird doesnt want the body.
Shipping to TX is going to be alot. probably $550 shipped to you, depending when i hear back from 400ci87firebird. i have shipped heavier parts to cali. and that cost me almost $400 for honda engine parts(shortblock, tranny and head)
Shipping to TX is going to be alot. probably $550 shipped to you, depending when i hear back from 400ci87firebird. i have shipped heavier parts to cali. and that cost me almost $400 for honda engine parts(shortblock, tranny and head)