Nate86

I totaled my '85 Trans Am a while back but most of the car and its parts are in good condition.

Performance stuff
--------------------

Hooker 2055 headers and y-pipe, Jet-Hot ceramic coated. Purchased for over $700 total, asking $350 OBO.

ZZ4 intake manifold, brand new never used. $50

Spohn tubular subframe connectors, brand new never used. No hardware included. Asking $75 OBO.

Original CC Quadrajet carb. Probably needs a good rebuild, but still works and has all parts. $40 OBO.

Other stuff
---------------------

Factory original Dashpad, no cracks, tears or rips... very good condition. $90 OBO.

Pioneer CD player, 2004 model with removable faceplate. $20

Radio/HVAC trim piece, good condition. $5

The rest of the car's parts are also for sale if you are looking for something, but these are probably the most valuable parts. If you are looking for something in particular though, just ask and I will see if I can get it for you!

Most of the car's parts can be seen here: http://www.cardomain.com/ride/591740/3

Tampa Hurricane

iTrader: (2)

Do you have pics of the dash pad?

iggy89

iTrader: (3)

very interested in the subframe connectors. Sending PM.

camaroz2810

iTrader: (2)

INTERESTED, can i see pictures of the headers, youngtothehouse10@yahoo.com

i_love_thirdgen

iTrader: (3)

very interested in the sfc... if iggy bails, send me a PIC!!!!

PeMa

iTrader: (4)

The headers have the AIR removed, right..?

//Per

Edit. Oh, I forgot... PM sent!

simz28

iTrader: (10)

Im interested in the sfc's too. What hardware is needed that is not included? Do you have a strut tower brace?

InfernalVortex

iTrader: (4)

What about the shift ****? It's the T handle, right?

Nate86

Tampa Hurricane, I don't have any recent pics of the dash pad but I am going to buy some batteries for my digital camera tomorrow and hopefully get some good pics to let you see what it looks like.

camaroz2810, I have pictures of them on the car on my cardomain page, but once I get them off the car itself I can send you some ones of just the headers themselves.

PeMa, yes, I'm sorry I forgot to mention the A.I.R. tubes have been removed and the holes sealed shut. The collectors have also been opened slightly to relieve restriction of exhaust gas flow. They seal perfectly fine, however and there are no leaks.

simz28, honestly I don't remember if there was any screws or bolts that came with the SFCs or not. Considering that they are weld-ins anyway, I don't imagine that would be a problem but like I said, if there was any hardware that came with them I don't have it anymore. All the SFC tubes are there though.

InfernalVortex, yes I have the shift **** still and yes, it is the T-handle. It's a little roughed up though but still 100% functional.

If anyone else has questions let me know by posting here or sending me a PM. I'll try to get back to everyone as quickly as possible.

EDIT: I forgot to mention to simz28, no I don't have a STB.

IROCZ_L98

iTrader: (2)

How much for the back half of the exhaust shipped to 23072? I need everything from the over the axle pipe back? Thanks

bfox88

iTrader: (2)

ill take the sfcs. 100 shipped to 08077?

demon138

i need the driver side headlight bracket, how much

i_love_thirdgen

iTrader: (3)

get in line bfox

Nate86

IROCZ_L98, check your PM.

demon138, by the bracket do you mean the metal housing the headlight? I don't know what sounds good if that's what your talking about, so how about $20 + shipping. Let me know if that sounds good.

Nate86

Here's some pics of the SFCs I took about an hour ago, still in the original bubble wrap from Spohn

Nate86

Pics of the dashpad

Nate86

T-**** shifter

Nate86

driver side headlight assembly

Nate86

here's the front of the car damaged from the wreck, just in case you guys were wondering

Shift06

Got a picture of the CD Player? How much for the Mirror Control switch too? And the steering wheel? And the T Shifter? AND, how much for shipping to K7R3L1 Ontario Canada? Also, how about the tail lights? And the passenger side headlight motor, is it alright? What about the side mirror glass for both sides? lol I want a lot of stuff :P

i_love_thirdgen

iTrader: (3)

did iggy ever do anything about the sfc's? those pics have got me wanting to burn some bucks.

MilehighBird

iTrader: (1)

Interested in the zz4 intake. Price with shipping to 80003? Do you take pay pal?

demon138

can you confirm that the bracket is straight and not broken? if so ill take it

86z28iroc-z

iTrader: (1)

How much for the MSD stuff, the wires, coil, cap/rotor? Shipped to 58075!

Thanks!

-Tyler

Nate86

Guys, I'm really sorry about not getting back to you yesterday!! It rained all day and I had to work a double at my new job, but I promise I will get everyone answers as soon as I get off today. Thanks and I'll get back to you guys around 2 PM!

Nate86

As far as payment goes, I would prefer cashier's check or money orders please. I do have a paypal account if that is your only option, however.

Shift06, I've already got someone interested in the CD player, but the steering wheel and shifter **** are still up for grabs. The taillights are the grid style but the black grids are faded in some areas and doesn't look very good and I'm not sure how to fix it. You can still get them if you would like though. The passenger side headlight has never worked properly, even before the wreck so I wouldn't want to sell you a defective part cause I never did figure out what was causing the problem. And finally I don't know what you're referring to when you say the side mirror glass? I thought the side mirrors were a whole assembly.

MilehighBird, I would prefer a cashier's check or money order. I'll PM about the shipping.

demon138, it doesn't look like it's damaged at all to me, but the front end got tore up pretty bad so I'll have to double check that for you. I'll let you know.

86z28iroc-z, you can have all that stuff for say $55 + whatever shipping is. Sound good?

Nate86

Here are some pictures for you PeMa. I've decided that I'm going to reduce the price for you to $275 since I uncovered a few problems with the y-pipe that you may want to look into. The headers themselves are still in great condition, though. No worries there.

Anyway, here they are:

1 - front side of passenger-side header
2 - back side of passenger-side header (that's not rust on the pipes... just dirt; the last bolt on the passenger side header was missing so the headers didn't seal correctly so you'll need to find one more bolt)
3 - front side of driver-side header

Nate86

1 - back side of driver-side header
2 - this is where the problems are. the top of the y-pipe itself looks to me like a combonation of surface rust that will sand right off and a lot of dirt. The y-junction is where the main problem is, but the rest of the pipe looks ok.
3 - again, the same problem with the y-junction. however, you'll notice that the driver side of the pipe is scraped up pretty bad (the y-pipe itself sits pretty low on the car, but I think I misaligned my exhaust a bit). It's only a thin layer at this point but it will probably need to be sanded and painted before it gets any worse.

EDIT: I also forgot to mention there was a small dent in the y-pipe near the y-junction. You may be able to see it in the last pic if you look close enough.

FIRECHICKEN

iTrader: (3)

What kind of Cat back do you have? Is it for a single or dual cat?

L8R

IROCZ_L98

iTrader: (2)

The cat back is a hooker but I got dibs on it first

intruder

iTrader: (1)

how much shipped for headers and y pipe to 62898

Shift06

Oh, I didn't know they were an assembly either lol, what about the whole assembly then? How much for those other pieces too?

FIRECHICKEN

iTrader: (3)

I just need a single cat 3" intermediate pipe. Anybody got one??

Nate86

I think I could sell you the one I have because IROCZ_L98 only needs the over axle pipe and muffler/tips. Unless he tells me otherwise you can grab it off of me.
----------
Shift06, I'll let you know what's going on tomorrow with that mirror because honestly I have no idea how to get it off and I didn't even look at it today. If you can wait till tomorrow I'll have some more info for you.

intruder, someone else has already claimed dibs on the headers and y-pipe but if it falls through I'll let you know!

Ymesss

iTrader: (1)

email/pm me a quote on the dash pad + emergency brake handle shipped to 16314. Thanks! email: alexmundt@gmail.com

Nate86

Someone else has already claimed the dashpad but I'll let you know if that works out. I could get you the emergency brake handle though.

Shadygrady

iTrader: (3)

I could be wrong but that damage looks repairable unless it bent the frame.Or is the rest of the car just not worth saveing.Just wondering.Btw what color is the interior?

Ymesss

iTrader: (1)

ok lmk on the break handle shipped

Nate86

The damage is repairable but I'm not going to do it since I don't have the tools, time or money to fix it. A few body shops quoted anywhere from $3500 to $5500 to repair it for me and I just don't have that kind of loot to drop on a car that already has problems.

The interior for the most part is grey with a few black pieces here and there

55ChevyMan

I am looking for a driveshalf for 86 IROC

86transamkid86

how much do you want for the high flow cat if some one already does not have/want it and how much to ship yp 02745?

intruder

iTrader: (1)

any word on the headers and y pipe ???????

patgta

same here

Nate86

Thanks for your interest guys, but the headers have already been sold and shipped. Sorry.

86transamkid86, no one has expressed interest in it so if you want it I'll sell it to you for $30 + shipping.

john1784h@yahoo

iTrader: (7)

are the front seat belts still in working shape?

86transamkid86

also if it does not fall throw i could use that msd coil i got all the same stuff just forgot the coil and how much for the intak manifold and will that fit on an 89 tbi camaro and are the front ground effect in good con. just the 2 sides that connect to the air dam? and would you combine shippin??????

lltrevino

iTrader: (1)

is cd player sold?????? if not email me, nascarwrench@yahoo.com

mq1kael

well if everybody else falls through I'd like the dist pieces myself. is It computer controlled? if not I'd take the whole thing...

dirtyguido

I would like the CD player, can you e-mail me the model # and possibly a pic of the faceplate to geoandroulakis _@_ gmail.com.

Thanks alot,

George

naf

iTrader: (7)

Sorry about the car...

Mike