You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join the ThirdGen.org community today!
Up for grabs this time: brand new Comp Cams XE276HR-14 camshaft. Commonly called the CC305. Comp part number 07-305-8. It will work with all 87 and newer small blocks, TPI, LT1, LT4.... Specs from Summit racing,
Cam Style: Hydraulic roller tappet
Basic Operating RPM Range: 1,500-5,500
Intake Duration at 050 inch Lift: 220
Exhaust Duration at 050 inch Lift: 230
Duration at 050 inch Lift: 220 int./230 exh.
Advertised Intake Duration: 276
Advertised Exhaust Duration: 290
Advertised Duration: 276 int./290 exh.
Intake Valve Lift with Factory Rocker Arm Ratio: 0.510 in.
Exhaust Valve Lift with Factory Rocker Arm Ratio: 0.510 in.
Valve Lift with Factory Rocker Arm Ratio: 0.510 int./0.510 exh. lift
Lobe Separation (degrees): 114
Again, this cam is brand new! Check for my username in the Feedback boards, Kwik89GTA. $100 plus shipping, I'll take paypal and USPS money orders.
Thanks, Kevin
