KillerZ302

iTrader: (4)

Hey guys, I have not been on here for a while but I am back on.

Here up for sale is a complete Tuned Port Setup, it has the plenum, chrome plated runners, lower intake manifold complete with fuel rail,regulator,5.7 injectors, LT1 throttle body adapted to plenum with new lt1 TPS and IAC sensors (i went LT1 TB cause the sensors are better) and the throttle cable bracket. The only thing its missing is the distributer cover which is all over ebay for $22.00 . I am also including the harness pigtails to convert your TPI throttle position sensor and idle air control to the new style LT1 sensors which are on the throttle body. It has the 9th injector and all the sensors req for the intake. Also the chrome on the runners is not so perfect, but still looks very nice.

I upgraded to the LT1 TB because it idles better and reacts faster. This set up came off a 87 Corvette and was on my Supercharged 383 85 Z28 which ran beautiful. I upgraded to my own custom sheetmetal intake system so I no longer need it.

It must go. I have to many parts and need money.
I can send pics of it out the car if needed.
Also I am paypal verified and check out my feedback.

Just let me Know. First $ 200.00 take it.

Dam computer at work wont let me post a pic.

Just find this thread and you will see it

https://www.thirdgen.org/forums/powe...slp-boost.html

1970 Buick

iTrader: (2)

ttt

shibbykins

iTrader: (1)

if it will bolt right upto my 91 then ill take it.

besides the distributer cap what else is needed.

pm me so we can talk about getting you cash

Josh

KillerZ302

iTrader: (4)

Hey, what year heads do you guys have? The intake bolts up to a 86 and down sbc heads but I can machine the 4 middle bolts to an angle so that they can be bolted to a 87 and up sbc centerbolt valve cover heads. Just let me know.
This is just the complete intake system with sensors, not the wiring harness or computer. If you already have a TPI then it will bolt right up. This is a good price for a spare Tpi that you can work at porting or for those of you who are converting to a tpi.
Thanks and let me know.
It would be shipped the cheapest way insured from miami, FL 33018.

shibbykins

iTrader: (1)

i have the 87 and up head. im converting my 350 tbi over to tpi finally.

Let me know if you can do that milling so it can work.

my zip is 79924